Valid

HG/T 5629-2019Ultra-high molecular weight polyethylene lining sheets for the chemical industry (English PDF)

化工用超高分子量聚乙烯衬里板

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for HG/T 5629-2019 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 24, 2019

Implementation date

July 1, 2020

Scope

HG/T 5629-2019 is the English-translated version of 化工用超高分子量聚乙烯衬里板.

HG/T 5629-2019 is the Chinese standard "Ultra-high molecular weight polyethylene lining sheets for the chemical industry".

Its scope clause reads: This standard specifies the classification, dimensions, requirements, testing methods, inspection rules, signs, packaging, transportation and storage of ultra-high molecular weight polyethylene (PE-UHMW) liner (abbreviated as " liner").

This standard is applicable to the liner molding or extrusion with ultra-high molecular weight polyethylene as the main material.

This standard is applicable to the liner contacted with solid powder, particles, chemical media under the temperature at most 50 °C and special industrial fluids (such as industrial waste water, pulp, crude oil, cryogenic fluid, etc.). Its clauses include classification; dimensions.

Found what you need?

Document preview — HG/T 5629-2019

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Classification
  • 4 Dimensions

1 Scope

This standard specifies the classification, dimensions, requirements, testing methods, inspection rules, signs, packaging, transportation and storage of ultra-high molecular weight polyethylene (PE-UHMW) liner (abbreviated as " liner").

This standard is applicable to the liner molding or extrusion with ultra-high molecular weight polyethylene as the main material.

This standard is applicable to the liner contacted with solid powder, particles, chemical media under the temperature at most 50 °C and special industrial fluids (such as industrial waste water, pulp, crude oil, cryogenic fluid, etc.).

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 1033.1 Plastics - Methods for determining the density of non-cellular plastics-Part 1:lmmersion method, liquid pyknometer method and titration method

GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics

GB/T 1041 Plastics - Determination of compressive properties

GB/T 2411 Plastics and ebonite - Determination of indentation hardness by means of a durometer(shore hardness)

GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

GB/T 2918 Plastics - standard atmospheres for conditioning and testing

GB/T 3960 Plastics - Test method for friction and wear by sliding

GB/T 6671-2001 Thermoplastics pipes - Determination of longitudinal reversion

GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values

GB/T 21461.2 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

MT/T 181 Code for safety performance inspection of plastic pipes used underground in coal

Mines

SH/T 1818 Plastics - Test method for abrasion properties of ultra-high-molecular-weight polyethylene (PE-UHMW) in abrasive/water slurry

3 Classification

Five types of the products are divided as follows in different uses:

- - CGB-1: General purpose liner;

- - CGB-2: Liner for gasket, sealing and lubrication;

- - CGB-3: High wear resistant liner;

- - CGB-4: Halogen free flame retardant functional liner;

- - CGB-5: Antistatic functional liner.

4 Dimensions

The overall dimensions of li […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Similar standards

How to Download HG/T 5629-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 5629-2019

$185.00