HG/T 4375-2012Modified ultra-high molecular weight polyethylene compounds for pipe lining (English PDF)
改性超高分子量聚乙烯管材衬里专用料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4375-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2012
Implementation date
March 1, 2013
Scope
HG/T 4375-2012 is the English-translated version of 改性超高分子量聚乙烯管材衬里专用料.
HG/T 4375-2012 is the Chinese chemical industry standard that deals with modified ultra-high molecular weight polyethylene compounds intended for pipe lining. It gives the terms and definitions used for this material, its classification and marking, the requirements placed on it, the test methods and the inspection rules.
Marking, packaging, transport and storage of the compound are covered as well. The text draws on GB/T 1040.1, GB/T 1040.2, GB/T 1634.1, GB/T 1843, GB/T 3682 and ISO 15527-2012, among the standards it quotes.
It sits under Chinese classification G94 and international classifications 71.120 and 83.140. Issued on 7 November 2012, it has applied since 1 March 2013.
Found what you need?
Document preview — HG/T 4375-2012
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4375-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard that deals with modified ultra-high molecular weight polyethylene compounds intended for pipe lining. It gives the terms and definitions used for this material, its classification and marking, the requirements placed on it, the test methods and the inspection rules. Marking, packaging, transport and storage of the compound are covered as well. The text draws on GB/T 1040.1, GB/T 1040.2, GB/T 1634.1, GB/T 1843, GB/T 3682 and ISO 15527-2012, among the standards it quotes. It sits under Chinese classification G94 and international classifications 71.120 and 83.140.
HG/T 4375-2012 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1040.1
GB/T 1040.2
GB/T 1634.1
GB/T 1634.2
GB/T 1843
GB/T 2918
GB/T 3682
GB/T 6679
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 19077.1
ISO 1628-3
ISO 2818
ISO 15527-2012
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 4371-2012 — PVC composite-lined towers for chemical industry
HG/T 4370-2012 — Composite gas absorption towers for chemical industry
HG/T 4369-2012 — Chemical ceramic support media with annular holes
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 94
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1040.1Plastics - Determination of tensile properties - Part 1: General principles
- GB/T 1040.2Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 1634.1Plastics - Determination of temperature of deflection under load - Part 1: General test method
- GB/T 1634.2Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
- GB/T 1843Plastics - Determination of izod impact strength
- GB/T 2918Plastics -- Standard atmospheres for conditioning and testing
ISO 1628-3 · ISO 2818 · ISO 15527-2012
Similar standards
How to Download HG/T 4375-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1040.1-2006 — Plastics - Determination of tensile properties - Part 1: General principles
GB/T 1040.1-2018 — Plastics - Determination of tensile properties - Part 1: General principles
GB/T 1040.1-2025 — Plastics - Determination of tensile properties - Part 1: General principles
HG/T 4375-2012
$105.00