HG/T 6046-2022Wear-resistant products made of injection-moulding grade ultra-high molecular weight polyethylene (PE-UHMW) - General requirements (English PDF)
注塑级超高分子量聚乙烯树脂制耐磨制品 通用要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 6046-2022 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 20, 2022
Implementation date
April 1, 2023
Scope
HG/T 6046-2022 is the English-translated version of 注塑级超高分子量聚乙烯树脂制耐磨制品 通用要求.
Wear-resistant articles moulded from injection grade ultra-high molecular weight polyethylene are the subject of HG/T 6046-2022. The standard deals with the raw materials, the requirements, the preparation of specimens, the test methods, the inspection rules, the quality certification documents and the packaging.
It applies to wear-resistant articles made from injection moulding grade ultra-high molecular weight polyethylene resin whose melt mass flow rate is 0.5 g/10 min or more, measured at 190 °C under 21.6 kg.
A recommended standard of the Chinese chemical industry, it was issued on 30 September 2022 and has been in force since 1 April 2023.
Found what you need?
Document preview — HG/T 6046-2022
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 6046-2022 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 October 2022 and has been in force since 1 April 2023.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
HG/T 6046-2022 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,854 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
JB 2293-1978 — Wind tunnel test method of radiator of automobile and tractor
HG/T 20718-2020 — Code for design of double-row curtain retaining structures with pressure relief for foundation pits
HG/T 20716-2020 — Technical specification for offshore cone penetration testing
HG/T 20722-2019 — Contents and in-depth regulations on the feasibility study report of the rubber plant construction project
5 Classification and status
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download HG/T 6046-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 6046-2022
$120.00