HG/T 4179-2011Autoclaves for precured tyre retreading (English PDF)
预硫化翻新轮胎硫化罐
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4179-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4179-2011 is the English-translated version of 预硫化翻新轮胎硫化罐.
The autoclaves used in precured tyre retreading are the subject of HG/T 4179-2011. This chemical industry standard sets the terms and definitions, the models and basic parameters, the requirements, the testing and inspection rules, and the provisions for signs, packaging, transport and storage.
It applies to precured retread tyre curing vessels heated electrically or by steam or thermal oil as the heat transfer medium, referred to in the text as curing tanks.
Because the equipment is a pressure vessel, GB 150-1998, JB/T 4711, JB/T 4746 and TSG R0004-2009 are quoted, alongside GB 5226.1-2008, GB 2894 and GB/T 12783. It is classified G95, with ICS 71.120 and 83.200. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4179-2011
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4179-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The autoclaves used in precured tyre retreading are the subject of HG/T 4179-2011. This chemical industry standard sets the terms and definitions, the models and basic parameters, the requirements, the testing and inspection rules, and the provisions for signs, packaging, transport and storage. It applies to precured retread tyre curing vessels heated electrically or by steam or thermal oil as the heat transfer medium, referred to in the text as curing tanks. Because the equipment is a pressure vessel, GB 150-1998, JB/T 4711, JB/T 4746 and TSG R0004-2009 are quoted, alongside GB 5226.1-2008, GB 2894 and GB/T 12783. It is classified G95, with ICS 71.120 and 83.200.
HG/T 4179-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
GB/T 191
GB 2894
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6326
GB/T 12783
GB/T 13306
HG/T 2108
HG/T 3120
JB/T 4711
JB/T 4746
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
HG/T 6382-2025 — Technical requirements of electron accelerator for tire irradiation processing
HG/T 4181-2011 — Building machines for tyre retreading
HG/T 4180-2011 — Tyre retreading buffing machines
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 95
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150-1998Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 2894Safety colours and safety signs
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6326Tyre - Vocabulary
- GB/T 12783Editorial nominating method for the modeldesignation of rubber and plastics machinery
Similar standards
How to Download HG/T 4179-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 4179-2011
$70.00