HG/T 4180-2011Tyre retreading buffing machines (English PDF)
翻新轮胎打磨机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4180-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4180-2011 is the English-translated version of 翻新轮胎打磨机.
HG/T 4180-2011 is the Chinese chemical industry standard for the buffing machines used in tyre retreading. It gives the terms and definitions, the models and basic parameters, the requirements, the testing, the inspection rules and the provisions for marking, packaging, transport and storage.
Its scope is the machines that buff tyres whose nominal rim diameter runs from 15 in to 22.5 in, both the expanding-drum type and the disc type. It quotes GB 4208-2008, GB 5226.1-2008, GB/T 6326, GB/T 7932, GB/T 12783-2000, GB/T 13306, GB/T 13384, HG/T 2108, HG/T 3120, HG/T 3223 and HG/T 3228. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4180-2011
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4180-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for the buffing machines used in tyre retreading. It gives the terms and definitions, the models and basic parameters, the requirements, the testing, the inspection rules and the provisions for marking, packaging, transport and storage. Its scope is the machines that buff tyres whose nominal rim diameter runs from 15 in to 22.5 in, both the expanding-drum type and the disc type. It quotes GB 4208-2008, GB 5226.1-2008, GB/T 6326, GB/T 7932, GB/T 12783-2000, GB/T 13306, GB/T 13384, HG/T 2108, HG/T 3120, HG/T 3223 and HG/T 3228.
HG/T 4180-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6326
GB/T 7932
GB/T 12783-2000 — Editorial nominating method for the modeldesignation of rubber and plastics machinery
GB/T 13306
GB/T 13384
HG/T 2108
HG/T 3120
HG/T 3223
HG/T 3228
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
HG/T 6382-2025 — Technical requirements of electron accelerator for tire irradiation processing
HG/T 4181-2011 — Building machines for tyre retreading
HG/T 4179-2011 — Autoclaves for precured tyre retreading
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 95
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 4208-2008Degrees of Protection Provided By Enclosure (IP Code)
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6326Tyre - Vocabulary
- GB/T 7932Pneumatic fluid power -- General rules and safety requirements for systems and their components
- GB/T 12783-2000Editorial nominating method for the modeldesignation of rubber and plastics machinery
- GB/T 13306Plates
Similar standards
How to Download HG/T 4180-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 12783-2000 — Editorial nominating method for the modeldesignation of rubber and plastics machinery
HG/T 4180-2011
$70.00