Valid

HG/T 4799-2015Tyre uniformity testing machines (English PDF)

轮胎均匀性检验机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4799-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 30, 2015

Implementation date

October 1, 2015

Scope

HG/T 4799-2015 is the English-translated version of 轮胎均匀性检验机.

Tyre uniformity testing machines are the subject of HG/T 4799-2015, a recommended standard of the Chinese chemical industry.

It gives the terms and definitions used for these machines, their models and basic parameters, the requirements placed on them, the testing performed and the rules of inspection, then settles marking, packaging, transport and storage.

It applies to machines that check the uniformity of car tyres and truck tyres on line. Among the standards it quotes are GB 4208-2008, GB 5226.1-2008, GB/T 7932-2003, GB/T 13277.1, GB/T 18506, GB/T 24342, GB/T 24343, GB/T 24344 and HG/T 3223. Issued on 30 April 2015, it has applied since 1 October 2015.

Found what you need?

Document preview — HG/T 4799-2015

National Standard of the People's Republic of China

ICS
71.120

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4799-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

Tyre uniformity testing machines are the subject of HG/T 4799-2015, a recommended standard of the Chinese chemical industry. It gives the terms and definitions used for these machines, their models and basic parameters, the requirements placed on them, the testing performed and the rules of inspection, then settles marking, packaging, transport and storage. It applies to machines that check the uniformity of car tyres and truck tyres on line. Among the standards it quotes are GB 4208-2008, GB 5226.1-2008, GB/T 7932-2003, GB/T 13277.1, GB/T 18506, GB/T 24342, GB/T 24343, GB/T 24344 and HG/T 3223.

HG/T 4799-2015 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 191

GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)

GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements

GB/T 6326

GB/T 6388

GB/T 7932-2003 — Pneumatic fluid power - General rules relating to systems

GB/T 8196-2003 — Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards

GB/T 9969

GB/T 12783

GB/T 13277.1

GB/T 13306

GB/T 13384

GB/T 18506

GB/T 24342

GB/T 24343

GB/T 24344

HG/T 2108

HG/T 3120

HG/T 3223

HG/T 3228-2001 — General technical specifications for painting of rubber and plastics machinery

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines

JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines

GB 20055-2006 — Safety requirements of mill for rubber and plastics

HG/T 4802-2015 — Ring tread building machines

HG/T 4801-2015 — Ring tread curing presses

HG/T 4800-2015 — X-ray inspection machines for tyres

6 Classification and status

International classification (ICS): 71.120

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

How to Download HG/T 4799-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4799-2015

$175.00