JB/T 11040-2010Electrical discharge machines for tyre moulds - Technical requirements (English PDF)
电火花轮胎模加工机床 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11040-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 11040-2010 is the English-translated version of 电火花轮胎模加工机床 技术条件.
JB/T 11040-2010 is a recommended Chinese machinery industry standard laying down the technical requirements for the electrical discharge machines used on tyre moulds.
The requirements run from accessories and tools, safety, machining and assembly quality to the running test of the machine, the inspection of machine accuracy, marking, the technical documentation supplied with the machine, packaging and the manufacturer warranty.
The standard applies to tyre mould electrical discharge machine tools of ordinary accuracy. Its Chinese classification is J59 and its international classification 25.080.99.
Among the standards it quotes are GB/T 5226.1-2008, GB/T 14896.1-2009 and JB/T 9874-1999.
Found what you need?
Document preview — JB/T 11040-2010
National Standard of the People's Republic of China
- ICS
- 25.080.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 11040-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard laying down the technical requirements for the electrical discharge machines used on tyre moulds. The requirements run from accessories and tools, safety, machining and assembly quality to the running test of the machine, the inspection of machine accuracy, marking, the technical documentation supplied with the machine, packaging and the manufacturer warranty. The standard applies to tyre mould electrical discharge machine tools of ordinary accuracy. Its Chinese classification is J59 and its international classification 25.080.99. Among the standards it quotes are GB/T 5226.1-2008, GB/T 14896.1-2009 and JB/T 9874-1999.
JB/T 11040-2010 falls under ICS 25.080.99, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 2894
GB/T 5226.1-2008
GB/T 9061-2006 — General specifications for metal-cutting machine tools
GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products
GB/T 13306-1991 — Plates
GB 13567
GB/T 14896.1-2009 — Non-traditional machines - Terminology - Part 1: Basic terminology
GB/T 14896.2-2009 — Non-traditional machines - Terminology - Part 2: Electro-discharge machines
GB/T 23571-2009 — Metal-cutting machine tool - Technic document compiled
JB/T 8356.1-1996 — Packaging of machine tools - Technical specifications
JB/T 8356.2-1996 — Packing cases for machine tools
JB/T 9874-1999 — Metal cutting machine tools - General technical requirements for assembly
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 12396-2015 — Proportional valve solenoids
JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements
GB 20775-2006 — Fused Deposition Modeling machines - Technical requirements for safeguarding
JB/T 10754-2025 — Electrolytic deburring machines - Technical specification
JB/T 14970-2025 — Top-mounted powder feeding metal powder bed laser melting forming machine - General Technical Specifications
JB/T 13231.2-2025 — Stereolithography machine tools - Part 2: Technical specifications
6 Classification and status
International classification (ICS): 25.080.99
Chinese Standard Classification (CCS): J 59
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 5226.1-2008Electrical safety of machinery -- Electrical equipment of machines -- Part 1: General requirements
- GB/T 9061-2006Metal-cutting machine tools - General specifications
- GB/T 9969-2008General principles for preparation of instructions for use of industrial products
- GB/T 13306-1991Plates
- GB 13567Electro-discharge machines. Technical requirements for safeguarding
GB/T 2894
Similar standards
How to Download JB/T 11040-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 13567-1992 — Electric discharge machines--Technical requirements for safeguarding
GB 13567-1998 — Electro-discharge machines. Technical requirements for safeguarding
GB/T 13306-1991 — Plates
JB/T 11040-2010
$85.00