Valid

GB/T 23571-2009Metal-cutting machine tool - Technic document compiled (English PDF)

金属切削机床随机技术文件的编制

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 23571-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 13, 2009

Implementation date

January 1, 2010

Scope

GB/T 23571-2009 is the English-translated version of 金属切削机床随机技术文件的编制.

GB/T 23571-2009 is the Chinese standard "Metal-cutting machine tool - Technic document compiled". Its scope clause reads: This standard specifies the basic requirements for its format and content of metal cutting machine tools for random technical documentation.

This standard applies to metal cutting machine tools (hereinafter referred to as the machine) manual, packing list and certificate of random technical documents (in Hereinafter referred to as document) preparation. Its clauses include basic requirements; file format.

Found what you need?

Document preview — GB/T 23571-2009

National Standard of the People's Republic of China

ICS: 25.080.01
Classification: J 50

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

1 Scope
2 Normative references
3 Basic requirements
4 file format

1 Scope

This standard specifies the basic requirements for its format and content of metal cutting machine tools for random technical documentation.

This standard applies to metal cutting machine tools (hereinafter referred to as the machine) manual, packing list and certificate of random technical documents (in

Hereinafter referred to as document) preparation.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 1.1 Standardization Guide Part 1. Standard structure and writing rules (GB/T 1.1-2000, ISO /IEC Di- rectives, Part 3,1997, RulesforthestructureanddraftingofInternationalStandards, NEQ)

GB 5226.1 Safety of machinery electrical equipment Part 1. General requirements (GB 5226.1-2002, IEC 60204-

1.2000, IDT)

GB/T 6576 machine lubrication system (GB/T 6576-2002, ISO 5170. 1977, MOD)

GB/T 7932 pneumatic systems General technical conditions (GB/T 7932-2003, ISO 4414.1998, IDT)

GB/T 9969 General Instructions industrial products

GB/T 15706.2 Safety of machinery - Basic concepts, general principles for design - Part 2. Technical principles (GB/T 15706.2-2007,

ISO 12100-2.2003, IDT)

GB 15760 metal cutting machine tool safety general technology condition

GB/T 23572 Metal Cutting Machine Hydraulic System General technical conditions

3 Basic requirements

3.1

file should be able to correctly guide the user adjustment, operation, maintenance tools, the contents of the file should be concise, clear chart, written expression should be smooth

Easy to understand, Duanluofenming, punctuation and correct.

3.2

Machine file name, type and technical parameters, terms, units of measurement, code and symbols should comply with the relevant standards, and should be maintained

Hold consistent, consistent with each other.

3.3 file characters, numbers and letters, etc

should be correct fonts, strokes clear, neat, characters should adopt the simplified national publication.

3.4

file structure in the drawings should not be directly work pattern.

3.5

Total file more than one page, each page shall be numbered.

3.6

file should normally be printed, printing or copying.

3.7

file format using (A4) heel, narratives that reference allows the lateral extension, but not more than 841mm, and narrative points

From binding to the drawings allow increased to 420mm × 891mm. If necessary, use other format size drawings.

3.8

content of the document should be consistent with the actual machine.

3.9

alter file content is not allowed, and insert the word upside down, any errors or modify the underlay available errata corrections.

3.10

The instructions shall also comply with the relevant provisions of GB/T 9969's.

4 file format

4.1

document cover should include the machine model and name, file name, the main machine parameters, number or contract number, country name and company name (see

Appendix A).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB 15760-2025|GB/T 16768-2025|GB/T 9061-2025|GB/T 44987-2024|GB/T 40735-2021|GB/T 37928-2019

How to Download GB/T 23571-2009

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.