JB/T 6347.3-2019Gear chamfering machines - Part 3: Technical requirements (English PDF)
齿轮倒角机 第3部分：技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6347.3-2019 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 2, 2019
Implementation date
January 1, 2020
Scope
JB/T 6347.3-2019 is the English-translated version of 齿轮倒角机 第3部分：技术条件.
JB/T 6347.3-2019 is the recommended Chinese machinery industry standard that sets the specifications for gear chamfering machines. This third part gives the requirements for their design, manufacture and acceptance.
It covers gear chamfering machines, referred to as machine tools, whose maximum workpiece diameter runs from 125 mm to 800 mm. The document is filed under Chinese classification J56 and ICS 25.080.99.
Among the standards it quotes are GB 5226.1-2008, GB/T 9061-2006, GB 15760-2004, GB/T 17421.5-2015, GB/T 23570-2009, GB/T 25372-2010, JB/T 3997-2011, JB/T 6347.2-2019 and JB/T 8356-2016. Issued on 2 May 2019, it has applied since 1 January 2020.
Found what you need?
Document preview — JB/T 6347.3-2019
National Standard of the People's Republic of China
- ICS
- 25.080.99
- Replacing
- JB/T 6347.4-2006
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 6347.3-2019 was issued by MIIT on 2 May 2019.
It replaces the earlier edition JB/T 6347.3-1999.
It is one of 6 parts of the JB/T 6347 series.
2 Scope
This standard is the recommended Chinese machinery industry standard that sets the specifications for gear chamfering machines. This third part gives the requirements for their design, manufacture and acceptance. It covers gear chamfering machines, referred to as machine tools, whose maximum workpiece diameter runs from 125 mm to 800 mm. The document is filed under Chinese classification J56 and ICS 25.080.99. Among the standards it quotes are GB 5226.1-2008, GB/T 9061-2006, GB 15760-2004, GB/T 17421.5-2015, GB/T 23570-2009, GB/T 25372-2010, JB/T 3997-2011, JB/T 6347.2-2019 and JB/T 8356-2016.
3 Normative references
JB/T 6347.3-2019 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB 5226.1-2008
GB/T 9061-2006
GB 15760-2004
GB/T 17421.5-2015 — Test code for machine tools -- Part 5: Determination of the noise emission
GB/T 23570-2009 — Welding parts for metal cutting machines - General specifications
GB/T 23571-2009 — Metal-cutting machine tool - Technic document compiled
GB/T 25372-2010 — Metal-cutting machine tools - Accuracy grade
GB/T 25373-2010 — Metal-cutting machine tools - General specifications of assembling
GB/T 25374-2010 — Metal-cutting machine tools - Measuring method of cleanliness
GB/T 25376-2010 — Metal-cutting machine tools - General specifications of machining parts
JB/T 3997-2011 — Grey iron castings for metal cutting machine tools - Technical requirements
JB/T 6347.2-2019 — Gear chamfering machines - Part 2: Testing of the accuracy
JB/T 8356-2016 — Packaging of machine tools - Technical requirements
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 6347.1-1999 — Gear chamfering machines - Parameters
JB/T 6347.1-2013 — 1: Types and parameters
JB/T 6347.2-1999 — Gear chamfering machines - Series spectrum
JB/T 6347.2-2019 — 2: Testing of the accuracy
JB/T 6347.4-2006 — 4: Specifications
Other editions:
JB/T 6347.3-1999 (earlier edition)
6 Classification and status
International classification (ICS): 25.080.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 9061-2006Metal-cutting machine tools - General specifications
- GB 15760-2004Metal cutting machines - General specifications for safeguarding
- GB/T 17421.5-2015Test code for machine tools -- Part 5: Determination of the noise emission
- GB/T 23570-2009Welding parts for metal cutting machines - General specifications
- GB/T 23571-2009Metal-cutting machine tool - Technic document compiled
- GB/T 25372-2010Metal-cutting machine tools - Accuracy grade
GB 5226.1-2008
Similar standards
Editions of JB/T 6347.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6347.3-2019 | Gear chamfering machines - Part 3: Technical requirements | current edition | Current |
| JB/T 6347.4-2006 | Gear chamfering machines - Part 3: Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 6347.3-2019. Earlier editions are listed for reference only.
How to Download JB/T 6347.3-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17421.5-2015 — Test code for machine tools -- Part 5: Determination of the noise emission
GB/T 23570-2009 — Welding parts for metal cutting machines - General specifications
GB/T 23571-2009 — Metal-cutting machine tool - Technic document compiled
Secure payment via Stripe
Payments accepted
JB/T 6347.3-2019
$150.00