Partners save 15% on every standard

Valid

GB/T 44987-2024Digital workshop—General requirements for planar buffer storage system (English PDF)

数字化车间平面式缓存储料系统通用要求

Open the GB/T 44987-2024 preview as PDF

Preview — first pages of GB/T 44987-2024 (full document: 15 pages)

This is a limited preview

Buy now to download the full PDF (15 pages)

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 28, 2024

Implementation date

June 1, 2025

Scope

GB/T 44987-2024 is the English-translated version of 数字化车间平面式缓存储料系统通用要求.

GB/T 44987-2024 is the Chinese national standard covering the flat store that holds blanks, tooling and fixtures between machines in a digital workshop — the system architecture, the mechanical side and the control centre that runs it, the transfer and storage function, the self-test, the inventory management, the interconnection without which the line cannot know what the buffer is holding, and the remote maintenance, the operating modes, the equipment and process performance, and the safety and maintenance requirements. First edition, under the China Machinery Industry Federation. In force from 1 June 2025. Issued on 28 November 2024, it has been in force since 1 June 2025.

Document preview — GB/T 44987-2024

National Standard of the People's Republic of China

ICS: 25.080.01
Classification: N 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface... III 1 Scope1
2 Normative references1
3 Terms and Definitions1
4 Abbreviations2
5 Planar buffer storage system architecture2
5.1 System Architecture2
5.2 Mechanical System3
5.3 Buffer storage system control center4
6 System Function Requirements4
6.1 Transshipment and Storage4
6.2 Self-Test4
6.3 Inventory Management4
6.4 Interconnection4
6.5 Remote Maintenance5
6.6 Operation Mode5
7 System Performance Requirements5
7.1 Equipment Performance5
7.2 Operational Process Performance5
7.3 Manufacturing Management Performance5
8 System safety and maintenance requirements5
References7

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document was proposed by the China Machinery Industry Federation.

This document is under the jurisdiction of the National Technical Committee for Standardization of Industrial Process Measurement, Control and Automation (SAC/TC 124).

This document was drafted by: Beijing Power Machinery Research Institute, Mechanical Industry Instrumentation and Metering Comprehensive Technology Research Institute, Beijing Institute of Technology, Jinshi Robot Changzhou Co., Ltd., Tsinghua University, Huazhong University of Science and Technology, Wuhan Dongyan Intelligent Design Institute Co., Ltd., Aerospace Science and Industry Corporation of China Tiandongli Research Institute (Suzhou) Co., Ltd., Luzhou Hanfei Aerospace Technology Development Co., Ltd., China Ordnance Industry New Technology Promotion Co., Ltd.

Institute, Beijing North Vehicle Group Co., Ltd., Shanghai Aerospace Precision Machinery Research Institute, Siemens (China) Co., Ltd., Hangzhou Asia Pacific Intelligent Equipment Co., Ltd., Kunchuan Intelligent Technology Co., Ltd., Hailite Robot Changzhou Co., Ltd., Henan Pingyuan Optoelectronics Co., Ltd.

Co., Ltd., Ningbo Bakewell Intelligent Technology Co., Ltd.

The main drafters of this document are: Ling Wenhui, Guo Kun, Ding Lu, Liu Zhiliang, Wang Huan, Jia Jianming, Liu Zhibing, Liu Jinshi, Li Bingran, Gao Liang, Zhang Yibo, Huang Yanming, Li Jiying, Qiu Tianyang, Huang Zhipeng, Ye Peiqing, Li Xinyu, Yang Xiangyu, You Heping, Xie Lijing, Li Hailong, Zhang Hui, Zhang Chunjiang, Yue Bo, Yao Zhiqi, Wang Yongfei, Zhao Bin, Hu Wenqing, Liu Yueping, Qian Weizhong, Jiang Lirun, Luo Yuanfeng, Wang Yajun, Zhang Chao, Wang Lei, Wang Cangbao, Wu Yuguang, Li Hongwei, Yang Xueqin, Li Ming, Wu Xingyao, Min Dingyong, Zhou Fei, Wang Sanmin, Li Xuan, Zhang Qiulin, Zheng Zujie, Fu Ling, Wu Xinzhong, Zou Chaopu, Duan Zhongzhou, and Cai Zhanggen. Digital workshop General requirements for planar buffer storage systems

1 Scope

This document specifies the system architecture, functional requirements, performance requirements, safety and maintenance of the digital workshop flat buffer storage system. Maintenance requirements.

This document applies to the design, construction and application of planar buffer storage systems.

2 Normative references

GB/T 4208-2017

GB/T 5226.1-2019

GB 15760-2004

GB/T 37393-2019

GB/T 38177-2019

GB/T 41255-2022

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 digital workshopdigital workshop

Based on the process and equipment required by the production object, using information technology, automation, measurement and control technology as a means, using data to connect the workshop The same unit is the implementation unit that plans, manages, diagnoses and optimizes the workshop operation process.

[Source. GB/T 37393-2019, 3.3]

3.2 production line

A line of equipment dedicated to producing a specific quantity of a product or product line.

[Source. GB/T 37413-2019, 3.4]

3.3 Material

It covers all physical objects used for turnover in the workshop.

Note. Materials include complete sets of materials, workpiece blanks, cutting tools, fixtures, measuring tools, auxiliary tools, process documents, production drawings, production record cards, etc.

[Source. GB/T 37413-2019, 4.4.5]

3.4 Planar buffer storage system

A flat structure system for buffering, storing and conveying materials.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 5226.1-2019

Editions of GB/T 44987

Edition	Title	Revision	Status
GB/T 44987-2024	Digital workshop - General requirements for planar buffer storage system	current edition	Current

This page sells the current edition, GB/T 44987-2024. Earlier editions are listed for reference only.

How to Buy GB/T 44987-2024

1Add to cart. Click the "Buy GB/T 44987-2024" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.