Valid

JB/T 4746-2002Heads for steel pressure vessels (English PDF)

钢制压力容器用封头

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4746-2002 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 1, 2002

Implementation date

March 1, 2003

Scope

JB/T 4746-2002 is the English-translated version of 钢制压力容器用封头.

JB/T 4746-2002 is the recommended Chinese machinery industry standard for formed heads used on steel pressure vessels. It sets the manufacturing, testing and inspection requirements for these heads and lists the common types together with their parameters.

The tabulated types and parameters cover heads made from a single plate or from welded plates and shaped by stamping, spinning or rolling, while the manufacturing and acceptance requirements reach further, to ellipsoidal, dished, conical and spherical cap heads of other types and parameters.

It works alongside GB 150-1998, GB/T 1804-2000, JB 4708-2000, JB 4730-1994 and JB 4732-1995. It replaced JB/T 4729-1994, JB/T 4737-1995, JB/T 4738-1995, JB/T 4739-1995 and JB 576-1964. Issued on 1 January 2002, it has applied since 1 March 2003.

Found what you need?

Document preview — JB/T 4746-2002

National Standard of the People's Republic of China

Replacing
JB/T 4729-1994

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 2.1 Terms
  • 3 Symbols
  • 4 Pattern parameters and markings
  • 5 Materials
  • 6 Manufacture, inspection and acceptance
  • 7 Documentation of outgoing quality
  • 8 Oil painting, packing and transportation

1 Foreword

JB/T 4746-2002 is issued by Ministry of Industry and Information Technology of the People's Republic of China.

1.1 This standard specifies manufacturing, inspection, and acceptance requirements of formed heads for steel pressure vessels, and simultaneously, present usual pattern and parameter of formed heads for steel pressure vessels.

1.2 Patterns and parameters presented by this standard are applicable to formed heads for steel pressure vessels shaped by stamping, flow forming, and rolling with complete board or plate alignment of types listed in table 1.

1.3 Manufacturing, inspection and acceptance requirements specified in this standard is both applicable to heads listed in table 1 and ellipsoidal, dished, edge fold conical and spherical cap heads for steel pressure vessels shaped by complete board or plate alignment with other types and parameters by stamping, flow forming and rolling.

2 Scope Preview

This standard is the recommended Chinese machinery industry standard for formed heads used on steel pressure vessels. It sets the manufacturing, testing and inspection requirements for these heads and lists the common types together with their parameters. The tabulated types and parameters cover heads made from a single plate or from welded plates and shaped by stamping, spinning or rolling, while the manufacturing and acceptance requirements reach further, to ellipsoidal, dished, conical and spherical cap heads of other types and parameters. It works alongside GB 150-1998, GB/T 1804-2000, JB 4708-2000, JB 4730-1994 and JB 4732-1995. It replaced JB/T 4729-1994, JB/T 4737-1995, JB/T 4738-1995, JB/T 4739-1995 and JB 576-1964. Issued on 1 January 2002, it has applied since 1 March 2003.

JB/T 4746-2002 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]

GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

JB 4708-2000 — Welding procedure qualification for steel pressure vessels - Welding specification for steel pressure vessels - Mechanical property tests of product welded test plates for steel pressure vessels

JB 4730-1994 — Nondestructive testing of pressure equipments. Part 1: General requirements

JB 4732-1995

4 Where this standard sits

It cites 5 standards, among them GB 150-1998, GB/T 1804-2000, JB 4708-2000, listed in full above.

One other standard in this catalogue cites it: GB/T 10479-2009.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 21 pages

6 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 4746

EditionTitleRevisionStatus
JB/T 4746-2002Heads for steel pressure vesselscurrent editionCurrent
JB/T 4729-1994Heads for steel pressure vesselsprevious editionSuperseded

This page sells the current edition, JB/T 4746-2002. Earlier editions are listed for reference only.

How to Download JB/T 4746-2002

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
21 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4746-2002

$305.00