Valid

JB/T 13441-2018Internal reduction pendulum mills (English PDF)

内减速摆式磨粉机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13441-2018 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 30, 2018

Implementation date

December 1, 2018

Scope

JB/T 13441-2018 is the English-translated version of 内减速摆式磨粉机.

JB/T 13441-2018 is a recommended standard of the Chinese machinery industry for the inner-reducer pendulum mill, also rendered as the internal deceleration pendulum mill.

It fixes the type and the basic parameters of the mill, sets the technical requirements and the test methods, states the inspection rules and regulates marking, packaging, transport and storage.

Among the standards it quotes are GB/T 191, GB/T 1804-2000, GB/T 3768, GB 5226.1, GB/T 8923.1-2011, GB/T 11365-1989, GB/T 19418-2003, GB/T 25706 and four parts of JB/T 5000. It is classified under D94 and 73.120.

Found what you need?

Document preview — JB/T 13441-2018

National Standard of the People's Republic of China

ICS: 73.120

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword
Scope
Normative references
About this standard
Classification and status

1 Foreword

JB/T 13441-2018 was issued by MIIT on 30 April 2018 and has been in force since 1 December 2018.

2 Scope

JB/T 13441-2018 is a recommended standard of the Chinese machinery industry for the inner-reducer pendulum mill, also rendered as the internal deceleration pendulum mill. It fixes the type and the basic parameters of the mill, sets the technical requirements and the test methods, states the inspection rules and regulates marking, packaging, transport and storage. Among the standards it quotes are GB/T 191, GB/T 1804-2000, GB/T 3768, GB 5226.1, GB/T 8923.1-2011, GB/T 11365-1989, GB/T 19418-2003, GB/T 25706 and four parts of JB/T 5000. It is classified under D94 and 73.120.

3 Normative references

JB/T 13441-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 191

GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

GB/T 3768

GB 5226.1

GB/T 8923.1-2011 — Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ

GB/T 11365-1989

GB/T 13306

GB/T 19418-2003 — Arc-welded joints in steel -- Guidance on quality levels for imperfections

GB/T 25706

JB/T 5000.3-2007 — General technical requirements for heavy machinery - Part 3: Weldments

JB/T 5000.10

JB/T 5000.12

JB/T 5000.13

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Classification and status

International classification (ICS): 73.120

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB 5226.1

How to Download JB/T 13441-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.