JB/T 12055-2014Technical specifications for three-roll push benches (English PDF)
三辊顶管机组技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12055-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 12055-2014 is the English-translated version of 三辊顶管机组技术条件.
JB/T 12055-2014 is the recommended Chinese machinery industry standard giving the technical specifications for three-roll push benches. It states the technical requirements for the plant and equipment of the three-roll pushing unit used in the hot rolling of seamless tube.
Its field of application is mills rolling carbon steel, low alloy steel, stainless steel and high alloy steel tube. Dimensional, gear and inspection documents are quoted, among them GB/T 1184-1996, GB/T 1804-2000, GB/T 6414-1999, GB/T 7935, GB/T 10095.1-2008, GB/T 10095.2-2008, GB/T 10096-1988, GB 11345-2013, GB/T 14039-2002 and parts of JB/T 5000.
It is classified H94 in China and 77.180 internationally. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 12055-2014
National Standard of the People's Republic of China
- ICS
- 77.180
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12055-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard giving the technical specifications for three-roll push benches. It states the technical requirements for the plant and equipment of the three-roll pushing unit used in the hot rolling of seamless tube. Its field of application is mills rolling carbon steel, low alloy steel, stainless steel and high alloy steel tube. Dimensional, gear and inspection documents are quoted, among them GB/T 1184-1996, GB/T 1804-2000, GB/T 6414-1999, GB/T 7935, GB/T 10095.1-2008, GB/T 10095.2-2008, GB/T 10096-1988, GB 11345-2013, GB/T 14039-2002 and parts of JB/T 5000. It is classified H94 in China and 77.180 internationally.
JB/T 12055-2014 falls under ICS 77.180, in the field of metallurgy.
This catalogue holds 222 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 6414-1999 — Castings. System of dimensional tolerances and machining allowances
GB/T 7935
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.2-2008 — Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
GB/T 10096-1988 — Accuracy of rack
GB 11345- 2013
GB/T 14039-2002 — Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
JB/T 5000.1
JB/T 5000.3-2007 — General technical requirements for heavy machinery - Part 3: Weldments
JB/T 5000.6
JB/T 5000.7
JB/T 5000.8
JB/T 5000.9
JB/T 5000.10
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 13314-2025 — Forged steel work rolls for cold rolling - General technical specifications
GB/T 1504-2024 — Cast iron rolls
YB/T 4064-2015 — Technical specifications of pay-off reel mandrel and tension reel mandrel for metal strip
JB/T 12052-2024 — Technical specification for piercing machine roll assembly
JB/T 12053-2014 — Technical specifications for roll stands of sizing and reducing mills
JB/T 12047-2014 — Tubular closers with online pre-stretching for elevator steel wire ropes
6 Classification and status
International classification (ICS): 77.180
Chinese Standard Classification (CCS): H 94
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 6414-1999Castings -- Dimensional tolerances and geometrical tolerances and machining allowances
- GB/T 7935Hydraulic fluid power - General requirements for hydraulic components
- GB/T 10095.1-2008Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
- GB/T 10095.2-2008Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations
GB 11345- 2013
Similar standards
How to Download JB/T 12055-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.2-2008 — Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
GB/T 10096-1988 — Accuracy of rack
JB/T 12055-2014
$165.00