JB/T 13403.2-2018Hot strip finishing mills - Part 2: General technical requirements (English PDF)

1 Foreword

JB/T 13403.2-2018 was issued by MIIT on 30 April 2018 and has been in force since 1 December 2018.

It is one of 2 parts of the JB/T 13403 series.

2 Scope

This standard is the second part of a recommended machinery industry standard of China on the finishing mill of the hot strip mill, the part that carries the general technical specification. It fixes the technical requirements, the test methods and the acceptance rules for the mill, and it also settles the marking, the packaging, the transport and the storage. The standard is recorded under the Chinese classification H94 and the international classification 77.180, and it was issued by the Ministry of Industry and Information Technology. Among the standards it quotes are GB/T 1504, GB/T 1800.2-2009, JB/T 4120 and several parts of JB/T 5000, including JB/T 5000.1, JB/T 5000.8 and JB/T 5000.14-2007.

3 Normative references

JB/T 13403.2-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 1504

GB/T 1800.2-2009

JB/T 4120

JB/T 5000.1

JB/T 5000.3

JB/T 5000.6

JB/T 5000.8

JB/T 5000.9

JB/T 5000.10

JB/T 5000.11

JB/T 5000.13

JB/T 5000.14-2007 — General technical requirements for heavy machinery - Part 14: Non-destructive testing of steel castings

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Related standards

Other parts of this standard:

JB/T 13403.1-2018 — 1: Performance parameters

6 Classification and status

International classification (ICS): 77.180

Prefix JB/T: recommended standard.