JB/T 12049-2014Cylindrical Pellet Mixer for Metallurgical Sintering Plant (English PDF)
冶金烧结厂用圆筒造粒混料机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12049-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 12049-2014 is the English-translated version of 冶金烧结厂用圆筒造粒混料机.
JB/T 12049-2014 is the recommended Chinese machinery industry standard for the cylindrical pellet mixer used in metallurgical sintering plants. It gives the basic parameters of the cylindrical mixing and granulating machine, the requirements, the installation and testing methods, the inspection rules and the provisions for marking and packaging.
The machine belongs to the sintering plant of iron and steel metallurgy, so the standard is classified H90 in China and 77.180 internationally.
Material, welding and measurement documents are quoted with it, including GB/T 191, GB/T 699, GB/T 700, GB/T 1184-1996, GB/T 1804-2000, GB/T 3274, GB/T 3323, GB/T 3768, GB 5226.1, GB/T 11345, GB/T 11352, JB/T 1604 and parts of JB/T 5000. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 12049-2014
National Standard of the People's Republic of China
- ICS
- 77.180
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12049-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for the cylindrical pellet mixer used in metallurgical sintering plants. It gives the basic parameters of the cylindrical mixing and granulating machine, the requirements, the installation and testing methods, the inspection rules and the provisions for marking and packaging. The machine belongs to the sintering plant of iron and steel metallurgy, so the standard is classified H90 in China and 77.180 internationally. Material, welding and measurement documents are quoted with it, including GB/T 191, GB/T 699, GB/T 700, GB/T 1184-1996, GB/T 1804-2000, GB/T 3274, GB/T 3323, GB/T 3768, GB 5226.1, GB/T 11345, GB/T 11352, JB/T 1604 and parts of JB/T 5000.
JB/T 12049-2014 falls under ICS 77.180, in the field of metallurgy.
This catalogue holds 222 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 699
GB/T 700
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3274
GB/T 3323
GB/T 3768
GB 5226.1
GB/T 6402
GB/T 7233.1
GB/T 9969
GB/T 10095.1
GB/T 11345
GB/T 11352
GB/T 13306
JB/T 1604
JB/T 5000.3
JB/T 5000.6
JB/T 5000.8
JB/T 5000.10
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 5000.15-2007 — General technical requirements for heavy machinery - Part 15: Non-destructive testing of steel forgings
JB/T 5000.8-2007 — General technical requirements for heavy machinery - Part 8: Forgings
JB/T 5000.9-2007 — General technical requirements for heavy machinery - Part 9: Machined parts
JB/T 12048-2014 — High Frequency Straight Welded Pipe Mill
JB/T 12046-2014 — Couplings for metallurgical equipment - Flange connections with dog teeth - Basic parameters and dimensions
JB/T 12045-2014 — Couplings for metallurgical equipment - Flange connections with face serrations - Basic parameters and dimensions
6 Classification and status
International classification (ICS): 77.180
Chinese Standard Classification (CCS): H 90
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 699Quality carbon structure steels
- GB/T 700Carbon structural steels
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3274Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels
Similar standards
How to Download JB/T 12049-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10095.1-2001 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
JB/T 12049-2014
$165.00