JB/T 11588-2013Large Hydraulic Cylinder (English PDF)
大型液压油缸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11588-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11588-2013 is the English-translated version of 大型液压油缸.
JB/T 11588-2013 is the recommended Chinese machinery industry standard for large hydraulic cylinders. It sets the structural type of the cylinder and its basic parameters, the technical requirements, the test methods, the inspection rules, and the marking, packaging, transport and storage provisions.
Its field of application is bounded by a minimum inside diameter of the cylinder. The Chinese classification is J20 and the international classification 23.100.40, with the Ministry of Industry and Information Technology as issuing body.
Among the standards it quotes are GB/T 1184-1996, GB/T 1800.2-2009, GB/T 1801-2009, GB/T 7935-2005, GB/T 13384, GB/T 14039-2002 and ISO 6164-1994.
Found what you need?
Document preview — JB/T 11588-2013
National Standard of the People's Republic of China
- ICS
- 23.100.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11588-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for large hydraulic cylinders. It sets the structural type of the cylinder and its basic parameters, the technical requirements, the test methods, the inspection rules, and the marking, packaging, transport and storage provisions. Its field of application is bounded by a minimum inside diameter of the cylinder. The Chinese classification is J20 and the international classification 23.100.40, with the Ministry of Industry and Information Technology as issuing body. Among the standards it quotes are GB/T 1184-1996, GB/T 1800.2-2009, GB/T 1801-2009, GB/T 7935-2005, GB/T 13384, GB/T 14039-2002 and ISO 6164-1994.
JB/T 11588-2013 falls under ICS 23.100.40, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1800.2-2009 — Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 1801-2009 — Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits
GB/T 7935-2005 — Hydraulic fluid power - General requirements for hydraulic components
GB/T 13384
GB/T 14039-2002 — Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
JB/T 5000.3
JB/T 5000.8
JB/T 5000.10
JB/T 5000.12
ISO 6164-1994
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 14034.1-2023 — Connections for hydraulic fluid power - Metallic tube connectors - Part 1: 24° cone connectors
GB/T 13871.5-2015 — Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 5: Identification of visual imperfections
JB/T 8727-2004 — Hydraulic hose assemblies
JB/T 15355-2025 — Hydraulic ball valve
JB/T 14943-2024 — Test method for deicing dust ring of reciprocating piston rod
JB/T 10205.2-2023 — Hydraulic cylinders - Part 2: Technical specifications for cylinder barrels
6 Classification and status
International classification (ICS): 23.100.40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1800.2-2009Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
- GB/T 1801-2009Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits
- GB/T 7935-2005Hydraulic fluid power - General requirements for hydraulic components
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 14039-2002Hydraulic fluid power—Contamination analysis—Method for coding the level of contamination by solid particles
ISO 6164-1994
Similar standards
How to Download JB/T 11588-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
JB/T 11588-2013
$195.00