Search GB
500 GB standards in English, from GB 3-1979 to GB 1886.136-2015, in code order.
- GB 3-1979Run-outs, undercuts and chamfers forgeneral purpose metric screw threads$40.00
- GB 31.2-1988Hexagon bolts with split pin hole on shank-Reduced shank-Product grade B$10.00
- GB 31.3-1988Hexagon bolts with split pin hole on shank-Fine pitch thread-Product grade A and B$25.00
- GB 32.2-1988Hexagon bolts with wire holes on head; Reduced shank; Product grade B$25.00
- GB 32.3-1988Hexagon Holts with Wire Holes on Head$15.00
- GB 67-1985Slotted pan head screws$25.00
- GB 68-1985Slotted countersunk flat head screws$25.00
- GB 69-1985Slotted raised countersunk head screws$25.00
- GB 70-1985Hexagon socket head cap screws$55.00
- GB 78-1985Hexagon socket set screws with cone point$40.00
- GB 79-1985Hexagon socket set screws with dog point$40.00
- GB 80-1985Hexagon socket set screws with cup point$40.00
- GB 91-1986Split pins$55.00
- GB 117-1986Taper pins$25.00
- GB 118-1986Taper pins with internal thread$25.00
- GB 119-1986Straight pins$40.00
- GB 120-1986Pins with internal thread$25.00
- GB 142-1984Logs for direct use$75.00
- GB 142-1995Logs for direct--Pit-props$169.00
- GB 142-2013Logs for pit-props$75.00
- GB 143.1-1984Coniferous processing logs--Species--Main application$165.00
- GB 146.1-1983Rolling stock gauge for standard gauge railways$115.00
- GB 146.1-2020Gauge for standard gauge railways - Part 1: Rolling stock gauge$115.00
- GB 146.2-1983Structure gauge for standard gauge railways$105.00
- GB 146.2-2020Gauge for standard gauge railways - Part 2: Structure gauge$105.00
- GB 150-1989Steel pressure vessell$165.00
- GB 150-1998[Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]$285.00
- GB 150-2011Pressure Vessels (Collection GB150.1~150.4-2011)$530.00
- GB 150.1-2011Pressure vessels—Part 1:General requirements$105.00
- GB 150.2-2011Pressure Vessels-Part 2: Materials$175.00
- GB 150.3-2011Pressure Vessels -Part3: Design$125.00
- GB 150.4-2011Pressure Vessels --Part 4: Fabrication, inspection and testing, and acceptance$125.00
- GB 151-1989Steel tubular heat exchanger$285.00
- GB 151-1999Tubular heat exchangers [including MODIFICATION 1]$285.00
- GB 153.1-1984Coniferous sawn timber--Species--Sizes--Tolerance$165.00
- GB 154-1984Sleeper$70.00
- GB 154-2013Wooden sleepers$75.00
- GB 155.1-1984Coniferous woods--Defects--Classification$165.00
- GB 156-1993Standard voltages$249.00
- GB 156-2003Standard voltages$145.00
- GB 175-1992Portland cement and ordinary portland cement$125.00
- GB 175-1999Portland cement and ordinary portland cement$209.00
- GB 175-2007[Replaced by GB 175-2023] Common Portland cement$125.00
- GB 175-2023Common portland cement$125.00
- GB 178-1977Standard sand for cement strength test$70.00
- GB 188-1963[GB/T 188-1963] Locomotive and car clearance boundary and structure clearance boundary for 762mm gauge railways. Classification and basic dimensions$95.00
- GB 190-1990Labels for packages of dangerous goods$85.00
- GB 190-2009Packing symbol of dangerous goods$85.00
- GB 191-1990Packaging--Pictorial markings for handling of goods$40.00
- GB 191-2000Packaging-Pictorial marking for handling of goods$85.00
- GB 199-1990Rapid harding portland cement$165.00
- GB 200-1989Moderate heat portland cement--Low heat portland slag cement$209.00
- GB 200-2003Moderate Heat Portland Cement Low Heat Portland Cement Low Heat Port$65.00
- GB 201-1981High alumina cement$95.00
- GB 201-2000Aluminate cements$95.00
- GB 203-1978Grained blast-furnace slag for cement$115.00
- GB 208-1963Test method for specific gravity of cement$165.00
- GB 209-1993Sodium hydroxide for industrial use$75.00
- GB 209-2006[GB/T 209-2006] Sodium hydroxide for industrial use$75.00
- GB 210-1992Sodium carbonate for industrial use$475.00
- GB 210.1-2004Specification and determination methods of sodium carbonate for industrial use - Part 1:Sodium carbonate for industrial use$55.00
- GB 217-1981Determination of the specific gravity of coal$165.00
- GB 218-1983Determination of carbon dioxide content in the mineral carbonates associated with coal$169.00
- GB 223.43-1985Iron, steel and alloy -- Determination of tungsten content -- Gravimetric method and spectrophotometric method$254.00
- GB 226-1991Etch test for macrostructure and defect of steels$35.00
- GB 248-1964Assembled reinforced-concrete supports for roadways in coal mines$165.00
- GB 250-1984Gray scale for assessing change in colour$165.00
- GB 250-1995Gray scale for assessing change in colour$169.00
- GB 251-1984Gray scale for assessing staining$165.00
- GB 251-1995Gray scale for assessing staining$169.00
- GB 252-1987Light diesel fuels$75.00
- GB 252-1994Light diesel fuels$75.00
- GB 252-2000Light diesel fuels$135.00
- GB 252-2011General diesel fuels$75.00
- GB 252-2015General diesel fuels$75.00
- GB 253-1989Kerosine$169.00
- GB 253-2008Kerosene$85.00
- GB 276-1989Rolling bearings--Deep groove ball bearings--Boundary dimensions$165.00
- GB 281-1984Rolling bearings--Self-aligning ball bearings--Boundary dimensions$205.00
- GB 285-1987Rolling bearings--Double row cylindrical roller bearings--Boundary dimensions$165.00
- GB 292-1983Radial bearing--Angular contact ball bearings--Boundary dimensions$209.00
- GB 305-1989Rolling bearings with locating snap ring--Dimensions and tolerances$105.00
- GB 307.1-1984Rolling bearings--Tolerances$255.00
- GB 311.1-1983Insulation co-ordination for high voltage transmission and transformation equipments$305.00
- GB 311.1-1997Insulation co-ordination for high voltage transmission and distribution equipment$155.00
- GB 311.1-2012Insulation co-ordination -- Part 1: Definitions, principles and rules$305.00
- GB 317-1998White granulated sugar$195.00
- GB 320-1993Synthetic hydrochloric acid for industrial use$175.00
- GB 320-2006Synthetic hydrochloric acid for industrial use$175.00
- GB 325-1991Packing container steel drum$195.00
- GB 326-1989Paper base petroleum asphalt felt, asphalt paper$209.00
- GB 326-2007Paper base petroleum asphalt felt$105.00
- GB 328.2-1989Test methods for asphalt waterproof roll roofing; Saturated and coated bitumen amount of asphalt$165.00
- GB 334-1981Trichlorophon technical$105.00
- GB 334-2001Trichlorfon technical$105.00
- GB 337-1984Concentrated nitric acid$169.00
- GB 338-1992Methanol for industrial use$115.00
- GB 338-2004Methanol for industrial use$135.00
- GB 338-2011[GB/T 338-2011] Methanol for industrial use$115.00
- GB 339-1989Synthetic phenol for industrial use$90.00
- GB 396-1984Circular reinforced concrete pole$165.00
- GB 396-1994Circular reinforced concrete pole$315.00
- GB 434-1982Methyl bromide technical$219.00
- GB 434-1995Methyl bromide technical$219.00
- GB 435-1984Chloropicrin$169.00
- GB 437-1993Copper sulfate$209.00
- GB 437-2009Copper sulfate (For crops use)$165.00
- GB 438-1977Jet fuel No.1$89.00
- GB 439-1990Aviation jet engine lubricating oils$25.00
- GB 440-1977Aviation lubricating oil No.20$65.00
- GB 443-1989Lubri cating oils for total loss systems L-AN$75.00
- GB 446-1993Refined paraffin wax$165.00
- GB 449-1984Sawn timber volume table$295.00
- GB 465-1979Test methods of paper wet strength$165.00
- GB 474-1983Methods for the preparation of coal sample$105.00
- GB 474-1996Preparation of coal sample$105.00
- GB 475-1983Methods for sampling salable coal samples$185.00
- GB 475-1996Sampling for commercial coal$105.00
- GB 475-2008[GB/T 475-2008] Method for manual sampling of commercial coal$185.00
- GB 481-1993Method of sampling run-of-mine coal$169.00
- GB 482-1979Methods of sampling for coal from coal seams$165.00
- GB 482-1995Sampling of coal in seams$105.00
- GB 491-1987Calcium base grease$169.00
- GB 494-1985Petroleum bitumens for architecture$165.00
- GB 518-1991Motorcycle tyres$289.00
- GB 518-1997Motorcycle tyres$249.00
- GB 518-2007Motorcycles tyres$105.00
- GB 518-2020Motorcycle tyres$105.00
- GB 535-1983Ammonium sulphate$165.00
- GB 539-1983Oil-resisting asbestos--Rubber sheets$165.00
- GB 546-1976Hall anchor--Type and dimensions$115.00
- GB 549-1983Electro-welded anchor chains$315.00
- GB 553-1983Painting and marking for chain cables$165.00
- GB 554-1983Mooring bitts$435.00
- GB 558-1983Bollards technical condition$40.00
- GB 567-1989Specification for domed metallic bursting discs$225.00
- GB 567-1999Bursting discs and bursting disc devices$185.00
- GB 567.1-2012Bursting disc safety devices - Part 1: Basic requirement$125.00
- GB 567.2-2012Bursting disc safety devices - Part 2: Application, selection and installation$75.00
- GB 567.3-2012Bursting disc safety devices - Part 3: Classification and mounting dimensions$75.00
- GB 567.4-2012Bursting disc safety devices - Part 4: Type test$125.00
- GB 568-1965Marine pipe flanges;Types$165.00
- GB 569-1965Marine pipe flanges;Connection dimensions and mating face$165.00
- GB 594-1983Marine forged steel male thread stop valves$55.00
- GB 595-1983Marine bronze male thread stop valves$55.00
- GB 596-1983Marine bronze male thread stop and check valves$165.00
- GB 598-1980Marine bronze external screwed packed cocks$40.00
- GB 600-1991General specifications for marine piping valves and fittings$55.00
- GB 605-1988Chemical reagent-General method for the measurement of colour(in Hazen units)$55.00
- GB 641-1978Chemical reagents--Potassium persulfate$165.00
- GB 645-1977Chemical reagents--Potassium chlorate$165.00
- GB 653-1978Chemical reagents--Barium nitrate$165.00
- GB 669-1977Chemical reagents--Strontium nitrate$169.00
- GB 691-1977Chemical reagents--Aniline$165.00
- GB 694-1981Chemical reagent -- Sodium acetate anhydrous$165.00
- GB 696-1977Chemical reagents--Urea$169.00
- GB 704-1988Dimensions, shape, weight and tolerances for hot-rolled flats$70.00
- GB 705-1989Hot-rolled hexagonal and octagonal steel bars; Dimensions, shape, weight and tolerance$55.00
- GB 707-1988Hot-rolled channel steel-Dimensions,shape,weight and tolerances$85.00
- GB 712-1988Hull structural steel$135.00
- GB 712-2000Hull structural steel$135.00
- GB 713-1986Carbon and low alloy steel plates for boilers carbon and alloy steel plates for boilers$165.00
- GB 713-1997Steel plates for boilers$289.00
- GB 713-2008Steel plates for boilers and pressure vessels$65.00
- GB 713-2014Steel plates for boilers and pressure vessels$65.00
- GB 715-1989Hot-rolled Round Carbon Steel Bars for Standard Parts$25.00
- GB 716-1991Cold-rolled plain carbon structural steel strips$85.00
- GB 719-1984Pig iron;sampling for chemical analysis$165.00
- GB 730-1986Blue wool standards for colour fastness to light and weathering$165.00
- GB 730-1998Textiles--Tests for colour fastness--Blue wool standards for colour fastness to light and weathering$90.00
- GB 734-1987Gunnybags, hessiancloth; Packaging and marking$25.00
- GB 748-1983Sulfate resistance portland cement$165.00
- GB 748-1996Sulfate resistance portland cement$85.00
- GB 752-1985Potassium chlorate$105.00
- GB 752-1994Potassium chlorate for industrial use$105.00
- GB 753-1965Specification for steam boilers$165.00
- GB 754-1965Specification for steam turbines$55.00
- GB 755-1987General requirements for rotating electrical machines$500.00
- GB 755-2000Rotating electrical machines-Rating and performance$505.00
- GB 755-2008Rotating Electrical Machines - Rating and Performance$225.00
- GB 756-1990Cylindrical shaft extension for rotating electrical machines$40.00
- GB 763-1990Heating of A.C. high-voltage apparatus under long runs$120.00
- GB 772-1987Technical specification of porcelain element for high voltage insulators$440.00
- GB 775.2-1987Test method for insulators--Part 2: Electrical test methods$240.00
- GB 795-1989Halon fire extinguishing systems performance requirements and method of test for container valves$115.00
- GB 796-1989Halon fire extinguishing systems performance requirement and method of test for nozzles$135.00
- GB 799-1988Eyelet bolts$40.00
- GB 811-1989Helmets for motor vehicle users$455.00
- GB 811-1998Helmets for motorcycle users$455.00
- GB 811-2010Helmets for motorcyclists$455.00
- GB 811-2022Helmets for motorcycle and electric bicycle users$455.00
- GB 819-1985Countersunk flat head screws$25.00
- GB 820-1985Countersunk raisde head screws (common head style) with cross recess$25.00
- GB 845-1985Cross recessed pan head tapping screws$55.00
- GB 846-1985Cross recessed countersunk head tapping screws$55.00
- GB 847-1985Cross recessed raised countersunk head tapping screws$55.00
- GB 879-1986Spring-type straight pins$25.00
- GB 880-1986Pins with split pin hole$25.00
- GB 881-1986Taper pins with external thread$40.00
- GB 889-1986Prevailing torque type hexagon nuts(with non-metallic insert),style 1$25.00
- GB 893.1-1986Circlips for holes; Type A$15.00
- GB 893.2-1986Circlips for hole; Type B$25.00
- GB 894.1-1986Circlips for Shaft - Type A$35.00
- GB 896-1986Rings$55.00
- GB 903-1987Colourless optical glass$740.00
- GB 912-2008[GB/T 912-2008] Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels$55.00
- GB 913-1985Mercury$209.00
- GB 913-2012Mercury$195.00
- GB 915-1984Bismuth ingot$165.00
- GB 917.1-1989The naming, numbering and coding rules of highway route--Naming and numbering rules$165.00
- GB 917.1-2000Mark rules of highway route name and number of national trunk highway$245.00
- GB 917.2-1989The naming, numbering and coding rules of highway route--Name and number of national trunk highway route$165.00
- GB 917.2-2000Hygienic standard for environmental electromagnetic waves$55.00
- GB 935-1989Limit value of allowable continuous heat exposure time in hot environment$205.00
- GB 936-1989Colour TV receiver-Colour temperature of white point-Reference white and its tolerance$10.00
- GB 967-1983Short shank nut taps$169.00
- GB 968-1983Manufacturing tolerances on the threaded portion of taps$169.00
- GB 969-1983Technical specification for taps$169.00
- GB 970-1983Hand and machine operated circular screwing dies$85.00
- GB 971-1983Thread rolling cylindrical dies$249.00
- GB 983-1985Stainless steel covered electrodes$265.00
- GB 986-1988Basic forms and sizes of weld grooves$195.00
- GB 987-1991Belt conveyor idlers―Basic parameters and dimensions$10.00
- GB 988-1991Belt conveyor pulleys-Basic parameters and dimensions$10.00
- GB 990-1991Belt conveyor idlers-Basic parameters and dimensions$10.00
- GB 994-1977Spiral tensioning device of TD belt conveyor - Basic parameters and dimensions$10.00
- GB 996-1977Car-type tensioning device of TD belt conveyor - Basic parameters and dimensions$25.00
- GB 998-1982Basic testing methods of low voltage electric apparatus$695.00
- GB 999-1988Voltage ratings of D.C electric traction system$10.00
- GB 1000.1-1988Pin insulators of ceramic material for high voltage overhead lines--Technical specifications$285.00
- GB 1000.2-1988Pin insulators of ceramic material for high voltage overhead lines-Part 2: Dimensions and characteristics$70.00
- GB 1001-1986The cap and pin type insulators--Technical specification$115.00
- GB 1002-1980Types, basic parameters and dimensions of single phase plugs and sockets$465.00
- GB 1002-1996Single phase plugs and socket-outlets for household and similar purposes. Types, basic parameters and dimensions$465.00
- GB 1002-2008[GB/T 1002-2008] Single phase plugs and socket-outlets for household and similar purposes. Types, basic parameters and dimensions [Quasi-Official / Academic version - translated by Chinese Institute]$75.00
- GB 1002-2024Single Phase Plugs and Socket-outlets for Household and Similar Purposes - Types, Basic Parameters and Dimensions$465.00
- GB 1003-1999Three phases plugs and socket-outlets for household and similar purposes. Types, basic parameters and dimensions$289.00
- GB 1003-2008Three phases plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions$215.00
- GB 1008-1989General terminology of machining tooling$270.00
- GB 1019-1989General requirements for packings of household electrical appliances$65.00
- GB 1033-1986Test method for density and relative density of plastics$135.00
- GB 1094.1-1985Power transformers--Part 1: General$535.00
- GB 1094.1-1996Power transformers. Part 1: General$535.00
- GB 1094.1-2013[GB/T 1094.1-2013, Including 2017XG1] Power transformers -- Part 1: General$535.00
- GB 1094.11-2007Power transformers—Part 11:Dry-type transformers$285.00
- GB 1094.16-2013Power transformers - Part 16: Transformers for wind turbine applications$465.00
- GB 1094.2-1985Power transformers--Part 2: Temperature rise$335.00
- GB 1094.2-1996Power transformers. Part 2: Temperature rise$205.00
- GB 1094.2-2013Power transformers -- Part 2: Temperature rise for liquid-immersed transformers$335.00
- GB 1094.3-1985Power transformers--Part 3: Insulation levels and dielectric tests$235.00
- GB 1094.3-2003Power transformers?Part 3:Insulation levels,dielectric tests and external clearances in air$385.00
- GB 1094.5-1985Power transformers--Part 5: Ability to withstand short circuit$245.00
- GB 1094.5-2003Power transformers - Part 5: Ability to withstand short circuit$235.00
- GB 1094.5-2008Power transformers -- Part 5: Ability to withstand short circuit$305.00
- GB 1103-1972Cotton (fine fiber cotton)$135.00
- GB 1103-1999Cotton--Upland cotton$135.00
- GB 1103-2007Cotton Upland cotton$225.00
- GB 1103.1-2012Cotton - Part 1: Saw ginned upland cotton$315.00
- GB 1103.1-2023Cotton - Part 1: Saw ginned upland cotton$300.00
- GB 1103.2-2012Cotton - Part 2: Roller ginned upland cotton$255.00
- GB 1103.3-2005Cotton - Part 3: Natural color upland cotton$105.00
- GB 1112-1981Keyway milling cutters with straight shank$165.00
- GB 1114-1985Shell end mills$169.00
- GB 1118-1985Side and face milling cutters with double alternate helix$55.00
- GB 1127-1981Woodruff key-seat milling cutters$169.00
- GB 1149-1982Piston rings for reciprocating internal combustion engines$165.00
- GB 1176-1987Specification for cast copper alloys$55.00
- GB 1177-1991Cast magnesium alloys$55.00
- GB 1181-1974The interference-fit threads (Screw into aluminum)$10.00
- GB 1186-1992Rubber hose for air supply$35.00
- GB 1207-1986Voltage transformers$165.00
- GB 1207-1997Voltage transformers$355.00
- GB 1207-2006Inductive voltage transformers$530.00
- GB 1208-1987Current transformers$165.00
- GB 1208-1997Current transformers$415.00
- GB 1208-2006Current transformers$535.00
- GB 1215-1987Vernier depth calipers$165.00
- GB 1219-1985Dial gauges$70.00
- GB 1234-1985High resistance alloys for electrical heating$235.00
- GB 1236-1985Test method for aerodynamic performance of ventilator$620.00
- GB 1241-1983Marine forged steel male thread stop and check valves$25.00
- GB 1244-1985Chainwheels for short pitch transmission precision roller chains and bush chains--Tooth profile and tolerance$180.00
- GB 1250-1989Rules for Expression and Judgment of Limiting Values$35.00
- GB 1251.1-1989Ergonomics -- Danger signals for public and work areas -- Auditory danger$145.00
- GB 1251.2-1996Ergonomics--Visual danger signals--General requirements, disign and testing$105.00
- GB 1251.3-1996Ergonomics--System of danger and non-danger signals with sound and light$85.00
- GB 1253-1989Working chemical--Sodium chloride$249.00
- GB 1253-2007Working chemical - Sodium chloride$165.00
- GB 1254-1990Working chemical--Sodium oxalate$209.00
- GB 1254-2007Working chemical - Sodium oxalate$125.00
- GB 1255-1990Working chemical--Sodium carbonate anhydrous$85.00
- GB 1255-2007Working chemical - Sodium carbonate anhydrous$85.00
- GB 1256-1990Working chemical--Arsenic trioxide$209.00
- GB 1256-2008Working chemical - Arsenic trioxide$105.00
- GB 1257-1989Working chemical--Potassium hydrogen phthalate$169.00
- GB 1257-2007Working chemical - Potassium hydrogen phthalate$105.00
- GB 1258-1990Working chemical--Potassium iodate$209.00
- GB 1258-2008Working chemical - Potassium iodate$105.00
- GB 1259-1989Working chemical--Potassium dichromate$109.00
- GB 1259-2007Working chemical - Potassium dichromate$109.00
- GB 1260-1990Working chemical--Zinc oxide$249.00
- GB 1260-2008Working chemical - Zinc oxide$105.00
- GB 1261-1977Basic chemical reagents (volumetry)--Anhydrous para-amino-phenyl-sulfonic acid$395.00
- GB 1271-1977Chemical reagents--Potassium fluoride$169.00
- GB 1289-1977Chemical reagents--Sodium oxalate$169.00
- GB 1302-1977Phenolic paper laminates, types 3020, 3021$55.00
- GB 1309-1987Varnished fabrics for electrical insulation$90.00
- GB 1312-1991Technical requiremnts of lampholders for tubular fluorescent lamps and starterholders$225.00
- GB 1312-2002Lamp holders for tubular fluorescent lamps and starter holders$680.00
- GB 1312-2007Lampholders for tubular fluorescent lamps and starter holders$800.00
- GB 1335.1-1991Size designation of clothes--Men$540.00
- GB 1335.2-1991Standard sizing systems for garments -- Women$500.00
- GB 1343.10-1984Covered wires--Measurement of overall diameter of high-frequency silk-covered bunched wires$25.00
- GB 1343.2-1984Covered wires--Measurement of dimensions$25.00
- GB 1343.4-1984Covered wires--Test method for springiness$25.00
- GB 1343.5-1984Covered wires--Method for mandrel winding test of round wires$25.00
- GB 1343.7-1984Covered wires--Method for adherence test$10.00
- GB 1343.9-1984Covered wires--Method for test of breakdown voltage by means of steel balls$40.00
- GB 1344-1992Portland blastfurnace-slag cement, portland pozzolana cement and portland fly-ash cement$249.00
- GB 1344-1999Portland blastfurnace-slag cement, portland pozzolana cement and portland fly-ash cement$209.00
- GB 1348-1988Spheroidal graphite iron castings$150.00
- GB 1350-1986Paddy$90.00
- GB 1350-1999Paddy$209.00
- GB 1350-2009Paddy$105.00
- GB 1350-2025Paddy$90.00
- GB 1351-1986Wheat$135.00
- GB 1351-1999Wheat$135.00
- GB 1351-2008Wheat$135.00
- GB 1351-2023Wheat$135.00
- GB 1352-1986Soybean$165.00
- GB 1352-2009Soybean$165.00
- GB 1352-2023Soya bean$165.00
- GB 1353-1986Maize$145.00
- GB 1353-1999Maize$70.00
- GB 1353-2009Maize$95.00
- GB 1353-2018Maize$145.00
- GB 1354-1986Rice$169.00
- GB 1354-2009Rice$105.00
- GB 1390-1993Shackle insulators for high voltage overhead lines$249.00
- GB 1391-1987Turnable treads steel gangway ladder$135.00
- GB 1392-1985Accommodation ladder winches$40.00
- GB 1393-1987Gangway turning device$70.00
- GB 1394-1987hanger$70.00
- GB 1397-1978Chemical reagents--Potassium carbonate$169.00
- GB 1402-1978Electric railways--Trunk lines--Current and voltage systems$169.00
- GB 1402-1998A. C. voltage of electric traction for the railway main lines$169.00
- GB 1404-1986phenolic moulding materials$145.00
- GB 1404-1995Phenolic moulding materials$145.00
- GB 1404.3-2008Plastics -- Phenolic powder moulding compounds -- Part 3: Requirements for selected moulding compounds$165.00
- GB 1406-1989Types and dimensions of Edison screw caps$165.00
- GB 1406-2001Types and dimensions of Edison screw lamp caps$255.00
- GB 1406.3-2003Types and dimensions of pre-focus caps$600.00
- GB 1406.4-2003Types and dimensions of lamp caps - Part 4: Shell and recessed caps$235.00
- GB 1407-1978Bayonet lamp caps--Types and dimensions$165.00
- GB 1407-1996Types and dimentions of bayonet lamp caps$375.00
- GB 1438-1985Taper shank twist drills$245.00
- GB 1443-1985Self-holding tapers for tool shanks--Dimensions and tolerances$165.00
- GB 1444-1987Edison screw lampholders specially used for explosion-proof luminaires$175.00
- GB 1444-2008Edison screw lamp holders specially used for explosion-proof luminaires$195.00
- GB 1445-2000White soft sugar$135.00
- GB 1445.1-1991White soft sugar$169.00
- GB 1495-1979Permissible noise limit emitted by power-driven vehicles$165.00
- GB 1495-2002Limits and measurement methods for noise emitted by accelerating motor vehicles$125.00
- GB 1497-1985Basic standard for low-voltage electrical apparatus$830.00
- GB 1499-1991Hot rolled ribbed steel bars for the reinforcement of concrete$165.00
- GB 1499-1998Hot rolled ribbed steel bars for the reinforcement of concrete$115.00
- GB 1499.1-2008[GB/T 1499.1-2008] [2012XG included] Steel for the reinforcement of concrete - Part 1: Hot rolled plain bars$65.00
- GB 1499.1-2024Steel for the reinforcement of concrete - Part 1: Hot rolled plain bars$135.00
- GB 1499.2-2007[GB/T 1499.2-2007] Steel for the reinforcement of concrete - Part 2: Hot rolled ribbed bars [including MODIFICATION 1]$75.00
- GB 1499.2-2024Steel for the reinforcement of concrete - Part 2: Hot rolled ribbed bars$195.00
- GB 1503-1989Cast steel rolls$245.00
- GB 1504-1991Cast iron rolls$135.00
- GB 1523-1993Wool$329.00
- GB 1523-2013Sheep wool$235.00
- GB 1523-2026Wool$435.00
- GB 1532-1986Peanut in shell$40.00
- GB 1533-1986Peanut kernel$10.00
- GB 1534-1986Peanut oil$165.00
- GB 1534-2003Peanut oil$75.00
- GB 1535-1986Soybean oil$169.00
- GB 1535-2003Soya bean oil$75.00
- GB 1536-1986Rapeseed oil$165.00
- GB 1536-2004Rapeseed oil$85.00
- GB 1537-1986Refined cottonseed oil$169.00
- GB 1537-2003Cottonseed oil$105.00
- GB 1545-1979Determination of pH in liquid extraction of pulp, paper and paper board$165.00
- GB 1549-1979Chemical analysis of the glass with sodium, calcium, silicon, aluminum and boron$249.00
- GB 1550-1979Testing methods for conductivity type of monocrystalline silicon$165.00
- GB 1553-1979Measurement of monocrystalline silicon lifetime by D. C photoconductive decay methods$285.00
- GB 1558-1983The method of determining substitutional carbon content in silicon by infrared absorption$165.00
- GB 1560-1979Normal diameters for ventilation pipe line and accessories for ships metric series$25.00
- GB 1576-1985Water quality for low pressure boiler$435.00
- GB 1576-1996Water quality for low pressure boilers$435.00
- GB 1576-2001Water quality for industrial boilers$435.00
- GB 1588-1989Clinical thermometer$115.00
- GB 1588-2001Clinical thermometer$145.00
- GB 1588-2024Medical glass thermometer$300.00
- GB 1589-1989Outside dimension limits of motor vehicles$165.00
- GB 1589-2004Limits of dimensions, axle load and masses for road vehicles [including MODIFICATION 1]$300.00
- GB 1589-2016Limits of dimensions, axle load and masses for motor vehicles,trailers and combination vehicles$75.00
- GB 1589-2026Limits of dimensions, axle load and masses for motor vehicles, trailers and combination vehicles$300.00
- GB 1593.1-1987Agricultural wheeled tractors--Three-point linkage--Part 1: Categories 1, 2 and 3$249.00
- GB 1593.4-1987Agricultural wheeled tractors--Three-point linkage--Part 4: Category 0$245.00
- GB 1604-1979Commodity pesticide regulations for acceptance$165.00
- GB 1610-2009Chromium trioxide for industrial use$155.00
- GB 1614-2011Barium carbonate for industrial use$255.00
- GB 1616-1988Hydrogen peroxide for industrial use$285.00
- GB 1616-2003Hydrogen peroxide for industrial use$135.00
- GB 1628-1989Glacial acetic acid for industrial use$115.00
- GB 1646-19892-Naphthol$165.00
- GB 1650-1982Direct sky blue 5B$165.00
- GB 1652-1979Naphtol AS$165.00
- GB 1653-1986Chloronitrobenzene$325.00
- GB 1665-1981Determination of the saponification value and ester content of plasticizer$165.00
- GB 1706-1993Titanium dioxide pigments$105.00
- GB 1720-1979Method of test for adhesion of paint films$25.00
- GB 1773-1988Bright silver flake$165.00
- GB 1774-1988Superfine silver powder$165.00
- GB 1775-1988Superfine gold powder$165.00
- GB 1776-1988Superfine platinum powder$165.00
- GB 1777-1988Superfine palladium powder$165.00
- GB 1783-1979The recording and exchange of broadcasting programs (magnetic tape sound recording)$169.00
- GB 1787-1979Aviation gasoline$255.00
- GB 1787-2008Aviation piston engine fuels$255.00
- GB 1787-2018Aviation piston engine fuels$115.00
- GB 1787-2026Aviation piston engine fuels$255.00
- GB 1788-1979Jet fuel No.2$80.00
- GB 1790-1979Vaseline$165.00
- GB 1790-1986Vaseline$165.00
- GB 1790-1994Medicinal vaseline$165.00
- GB 1790-2003Medicinal vase-line$280.00
- GB 1790-2012Medicinal vaseline$374.00
- GB 1791-1979White oils$40.00
- GB 1795-1988Tyre valve cores$165.00
- GB 1795-1996Tyre valve core$85.00
- GB 1796-1988Tyre valve$295.00
- GB 1796-1996Tyre valve$295.00
- GB 1796.1-2008Tyre valves - Part 1: Clamp-in valves$195.00
- GB 1796.2-2008Tyre valves - Part 2: Rubber base valves$590.00
- GB 1796.3-2008Tyre valves - Part 3: Snap-in valves$135.00
- GB 1796.4-2009Tyre valves—Part 4:Clamp-in valves$465.00
- GB 1796.5-2009Tyre valves - Part 5: Tyre valves for large core chamber$345.00
- GB 1796.6-2008Tyre valves - Part 6: Cores$105.00
- GB 1796.7-2009Tyre valves - Part 7: Components$345.00
- GB 1797-1986Stipulation of classification for raw silk$169.00
- GB 1797-2001Raw silk$135.00
- GB 1798-1986Inspection regulations of raw silk$280.00
- GB 1800-1979Tolerance and Fitting - General Standard Tolerance and Fundamental Deviation$145.00
- GB 1801-1979Tolerance and fitting, dimensions up to 500mm holes, shaft tolerance range and fitting$165.00
- GB 1815-1979Determination of the bromine valence for benzene-homologue products$169.00
- GB 1835-1985Series 1 freight containers - Corner fittings technical specifications$644.00
- GB 1838-1980Determination of the weight of tin coating plated on steel plate (or tape)$169.00
- GB 1853-1980Pg6 flanged cast steel stop check valve for marine use$169.00
- GB 1886-1992Food additive--Sodium carbonate$195.00
- GB 1886-2008Food additive - Sodium carbonate$195.00
- GB 1886.1-2015National Food Safety Standard - Food Additives - Sodium carbonate$185.00
- GB 1886.1-2021National food safety standard - Food additives - Sodium carbonate$165.00
- GB 1886.10-2015National Food Safety Standard -- Food Additives -- Ice acetic acid (also known as glacial acetic acid)$115.00
- GB 1886.100-2015National Food Safety Standard -- Food Additives -- Disodium edetate$100.00
- GB 1886.101-2016National Food Safety Standard -- Food Additives -- Stearic acid (also known as octadecanoic acid)$70.00
- GB 1886.102-2016National Food Safety Standard -- Food Additives -- Calcium stearate$80.00
- GB 1886.103-2015National Food Safety Standard -- Food Additives -- Microcrystalline cellulose$70.00
- GB 1886.104-2015National Food Safety Standard - Food Additives - Quinoline yellow$175.00
- GB 1886.104-2024National Food Safety Standard--Food Additive--Quinoline Yellow$240.00
- GB 1886.105-2016National Food Safety Standard -- Food additives -- Pepper Orange$135.00
- GB 1886.106-2015National Food Safety Standard -- Food Additives -- Tamarind gum$40.00
- GB 1886.107-2015National Food Safety Standard -- Food Additives -- Sodium citrate$100.00
- GB 1886.108-2015National Food Safety Standard -- Food Additives -- Azodicarbonamide$100.00
- GB 1886.109-2015National Food Safety Standard -- Food Additives -- Hydroxypropyl methyl cellulose (HPMC)$100.00
- GB 1886.11-2016Food additive -- Sodium nitrite$85.00
- GB 1886.110-2015National Food Safety Standard -- Food Additives -- Natural amaranth$100.00
- GB 1886.111-2015National Food Safety Standard -- Food Additives -- Beet red$70.00
- GB 1886.112-2015National Food Safety Standard -- Food Additives -- Polyoxyethylene xylitol monostearate$70.00
- GB 1886.113-2015National Food Safety Standard -- Food Additives -- Yellow chrysanthemum extract$70.00
- GB 1886.114-2015National Food Safety Standard -- Food Additives -- Shellac (also known as shellac)$55.00
- GB 1886.115-2015National Food Safety Standard -- Food Additives -- Red beans$55.00
- GB 1886.116-2015National Food Safety Standard -- Food Additives -- Xylitol monostearate$85.00
- GB 1886.117-2015National Food Safety Standard -- Food Additives -- Hydroxy Citronellal$89.00
- GB 1886.118-2015National Food Safety Standard -- Food Additives -- Chrysanthemum flower extract$40.00
- GB 1886.119-2015National Food Safety Standard -- Food Additives -- 1,8 Cineole$55.00
- GB 1886.12-2015National Food Safety Standard -- Food Additives -- Butylated hydroxyanisole (BHA)$115.00
- GB 1886.120-2015National Food Safety Standard -- Food Additives -- Caproic acid$55.00
- GB 1886.121-2015National Food Safety Standard -- Food Additives -- Butyric acid$89.00
- GB 1886.122-2015National Food Safety Standard -- Food Additives -- Peach aldehyde (also known as γ-undecane lactone)$55.00
- GB 1886.123-2015National Food Safety Standard -- Food Additives -- α-hexyl cinnamic aldehyde$55.00
- GB 1886.124-2015National Food Safety Standard -- Food Additives -- Patchouli oil$55.00
- GB 1886.125-2015National Food Safety Standard -- Food Additives -- Cinnamic alcohol$55.00
- GB 1886.126-2015National Food Safety Standard -- Food Additives -- Linalyl$55.00
- GB 1886.127-2016National Food Safety Standard -- Food Additives -- Hawthorn nuclear smoked flavouring material I, II$70.00
- GB 1886.128-2015National Food Safety Standard -- Food Additives -- Methyl cyclopentenolone (also known as 3-methyl-2-hydroxy-2-ene-1-one)$55.00
- GB 1886.129-2015National Food Safety Standard - Food Additives - Eugenol$89.00
- GB 1886.129-2022National food safety standard - Food additive - Eugenol$70.00
- GB 1886.13-2015National Food Safety Standard -- Food Additives -- Potassium permanganate$115.00
- GB 1886.130-2015National Food Safety Standard -- Food Additives -- Ethyl oenanthate$85.00
- GB 1886.131-2015National Food Safety Standard -- Food Additives - α-amyl cinnamic aldehyde$55.00
- GB 1886.132-2015National Food Safety Standard -- Food Additives -- Allyl caproate$85.00
- GB 1886.133-2015National Food Safety Standard -- Food Additives -- Dates tincture$69.00
- GB 1886.134-2015National Food Safety Standard -- Food Additives - γ-nonalactone$85.00
- GB 1886.135-2015National Food Safety Standard -- Food Additives -- Benzyl alcohol$55.00
- GB 1886.136-2015National Food Safety Standard -- Food Additives -- Butyric acid benzyl ester$55.00
All GB ranges
- GB 3-1979 – GB 1886.136-2015
- GB 1886.137-2015 – GB 1975-1980
- GB 1975-2010 – GB 3768-1983
- GB 3778-1989 – GB 4706.27-2003
- GB 4706.27-2008 – GB 5009.182-2017
- GB 5009.183-2025 – GB 5699-1985
- GB 5705-1985 – GB 7000.7-2005
- GB 7000.8-1997 – GB 8281-1987
- GB 8281-2000 – GB 9706.265-2021
- GB 9706.27-2005 – GB 11027-1989
- GB 11028-1989 – GB 12326-1990
- GB 12326-2000 – GB 13532-1992
- GB 13539.1-1992 – GB 14930.2-2025
- GB 14932-2016 – GB 16190-1996
- GB 16191-1996 – GB 17342-2009
- GB 17352-1998 – GB 18442-2001
- GB 18445-2001 – GB 19521.1-2004
- GB 19521.10-2004 – GB 21906-2008
- GB 21907-2008 – GB 25466.1-2025
- GB 25467-2010 – GB 28380-2025
- GB 28381-2012 – GB 31459-2015
- GB 31533-2015 – GB 43049-2023
- GB 43066-2023 – GB 50223-2004
- GB 50223-2008 – GB 50723-2011
- GB 50724-2011 – GB 8599-2023