GB 694-1981Chemical reagent -- Sodium acetate anhydrous (English PDF)
Also coversGB694-1981
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for GB 694-1981 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Mandatory
Issue date
May 15, 2015
Implementation date
December 1, 2015
Scope
GB 694-1981 (Chemical reagent -- Sodium acetate anhydrous) is available as an English-translated PDF.
GB 694-1981 — This standard specifies the chemical reagent anhydrous sodium acetate traits, specifications, testing, inspection rules, packaging, storage, transportation and signage.
This standard applies to chemical agents anhydrous sodium acetate test. Exemplary formula. CH3COONa Molecular Weight. 82.02 (according to 2011 international relative atomic mass)
Found what you need?
Document preview — GB 694-1981
National Standard of the People's Republic of China
- ICS
- 71.040.30
- Classification
- G 63
- Replacing
- GB/T 694-1995
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Characters
- 4 Specification
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 694-1995 "Chemicals anhydrous sodium acetate", compared with the GB/T 694-1995 Technical Changes as follows.
--- Clarity test specifications by a "qualified" to "3", "5" (see Chapter 4, 1995 edition 3.3);
--- Modify the Content Measurement (see 52, 1995 version 4.1.);
--- Modify the determination of calcium (see 512, 1995 edition 4.3.9.);
--- Determination of heavy metals increased sodium sulfide - glycerol assay (see 514, 1995 edition of 4.3.11.);
--- Modify the packaging and logo (see Chapter 7, Chapter 6, 1995 edition).
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Standardization Technical Committee Chemistry (SAC/TC63) centralized.
This standard was drafted. Shanghai again four Hervey Chemical Co., Ltd. Shanghai test four chemicals.
1 Scope
This standard specifies the chemical reagent anhydrous sodium acetate traits, specifications, testing, inspection rules, packaging, storage, transportation and signage.
This standard applies to chemical agents anhydrous sodium acetate test.
Exemplary formula. CH3COONa Molecular Weight. 82.02 (according to 2011 international relative atomic mass)
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
Preparation of GB/T 601 chemical reagent standard titration solution Preparation of standard solution of GB/T 602 Determination of impurities in chemical reagents GB/T 603 chemical reagent in test methods - Preparations with Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 9723-2007 Chemicals flame atomic absorption spectrometry General GB/T 9724 General rule for determination of pH chemical reagent GB/T 9727 General method for the determination of phosphate chemical reagent GB/T 9728 General method for determination of chemical reagents sulfate GB/T 9729 General method for determination of chloride Chemicals General method for determination of GB/T 9734-2008 aluminum Chemicals GB/T 9735 General method for determination of heavy metals Chemicals GB/T 9738 Determination of water insoluble chemical reagent - General method GB/T 9739 General method for determination of iron chemical reagents GB 15346 chemical reagent packaging and marking HG/T 3484 standard chemical reagents glass emulsion and clarity standards HG/T 3921 Chemicals sampling and acceptance rules
3 Characters
This reagent as a white powder, soluble in water.
4 Specification
Of anhydrous sodium acetate as shown in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 602Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 603Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 9723-2007Chemical Reagent - General rule for flame atomic absorption spectrometric analysis
- GB/T 9724Chemical reagent -- General rule for the determination of pH
GB/T 9738 · GB/T 9739
How to Download GB 694-1981
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 15346-2012 — Chemical reagents - Packaging and marking
GB/T 601-2016 — Chemical Reagent - Preparations of Standard Volumetric Solutions
GB/T 6011-2005 — Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method
Secure payment via Stripe
Payments accepted
GB 694-1981
$155.00