GB/T 9729-2007Chemical reagent -- General method for the determination of chloride (English PDF)
Also coversGBT9729-2007
This is a limited preview
Buy now to download the full PDF (5 pages)
Need quotation for your management?
Get a formal quotation for GB/T 9729-2007 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Recommended
Issue date
September 26, 2007
Implementation date
April 1, 2008
Scope
GB/T 9729-2007 (Chemical reagent -- General method for the determination of chloride) is available as an English-translated PDF.
GB/T 9729-2007 — This Standard specifies the general method for the determination of chloride via visual turbidimetry. This Standard is applicable to the determination of trace chloride in chemical reagent. Detection range is 0.2 µg/mL ~ 4 µg/mL (in Cl).
Found what you need?
Document preview — GB/T 9729-2007
National Standard of the People's Republic of China
- ICS
- 71.040.30
- Classification
- G 60
Issued by: General Administration of Quality Supervision, Inspection and Quarantine
Contents
- Foreword...3
- 1 Scope...4
- 2 Normative references...4
- 3 Principle...4
- 4 Reagent and material...5
- 5 Determination...5
Foreword
This Standard is not equivalent to ISO 6353-1.1982 Reagents for chemical
analysis - Part 1. General test methods.
This Standard replaces GB/T 9729-1988 Chemical reagent - General method
for the determination of chloride. Compared with GB/T 9729-1988, the main
change is as follows.
- Refined the determination method (Clause 5 of 1988 edition, Clause 5 of
this Standard).
This Standard was proposed by China Petroleum and Chemical Industry
Federation.
This Part shall be under the jurisdiction of the National Standardization
Technical Committee of Chemical Reagents (SAC/TC 63 / SC 3).
The drafting organization of this Standard. Guangdong Guanghua Chemical
Factory Co., Ltd.
Main drafters of this Standard. Zhang Zhibin, Lin Chuqing, and Zhang Mingchun.
This Standard was issued in 1988 for the first time.
Chemical reagent –
General method for the determination of chloride
1 Scope
This Standard specifies the general method for the determination of chloride
via visual turbidimetry.
This Standard is applicable to the determination of trace chloride in chemical
reagent. Detection range is 0.2 µg/mL ~ 4 µg/mL (in Cl).
2 Normative references
The following standards contain the provisions which, through reference in this
Standard, constitute the provisions of this Standard. For dated references, the
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
versions apply to this Standard.
GB/T 602 Chemical Reagent - Preparations of Standard Solutions for
Impurity (GB/T 602-2002, ISO 6353-1.1982, NEQ)
GB/T 603 Chemical Reagent - Preparations of Reagent Solution for Use in
Test (GB/T 603-2002, ISO 6353-1.1982, NEQ)
GB/T 6682 Water for analytical laboratory use - Specification and test
methods (GB/T 6682-1992, neq ISO 3696.1987)
3 Principle
In hydrochloric acid medium, chlorine ions and silver ions form insoluble silver
chloride. When chlorine ion content is low, silver chloride is in suspension within
a certain time, which makes solution turbid and applicable to visual turbidimetry
of chloride.
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 602Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 602-2002Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 603Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 603-2002Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 6682-1992Water for analytical laboratory use - Specification and test methods
ISO 6353 · ISO 3696.1987
How to Download GB/T 9729-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 602-2026 — Chemical reagent - Preparation of standard solutions for impurity determination
GB/T 6022-2008 — Butadiene for industrial use - Determination of oxygen in gaseous phase above liquid butadiene
GB/T 6023-2008 — Butadiene for industrial use - Determination of trace water - Coulometric Karl Fischer method
Secure payment via Stripe
Payments accepted
GB/T 9729-2007
$45.00