GB/T 9734-2008Chemical reagent -- General method for the determination of aluminium (English PDF)
化学试剂 铝测定通用方法
This is a limited preview
Buy now to download the full PDF (1 pages)
Need quotation for your management?
Get a formal quotation for GB/T 9734-2008 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
May 15, 2008
Implementation date
November 1, 2008
Scope
GB/T 9734-2008 is the English-translated version of 化学试剂 铝测定通用方法.
GB/T 9734-2008 — This standard specifies the Rose tricarboxylic acid ammonium (aluminum reagent) and chromium azure S colorimetric determination of aluminum in the general method.
Rose tricarboxylic acid ammonium (aluminum reagent) Spectrophotometric detection range of 0.4µg/mL ~ 2µg/mL (calculated as Al), visual colorimetric detection range of 0.2µg/mL ~ 2µg/mL (calculated as Al); Chromium Azure S spectrophotometric detection range of 0.01µg/mL ~ 0.2µg/mL (calculated as Al), visual colorimetry the detection range of 0.008µg/mL ~ 0.2µg/mL (calculated as Al).
Found what you need?
Document preview — GB/T 9734-2008
National Standard of the People's Republic of China
- ICS
- 71.040.30
- Classification
- G 60
- Replacing
- GB/T 9734-1988
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 PRINCIPLE OF THE METHOD
- 3.2 Chromium Azure S colorimetry
- 4 Reagents and materials
- 5 Instruments
- 6 Determination
Foreword
This standard and ISO 6353-1. 1982 "Chemical analysis of reagent --- Part 1. General test method" non-equivalent.
This standard replaces GB/T 9734-1988 "Determination of aluminum Chemicals General Method", compared with the GB/T 9734-1988 major changes as follows.
--- Increased Chromazurol S Determination of aluminum (Excerpts Chapter 1, 3.2).
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Standardization Technical Committee Chemistry Chemicals Branch (SAC/TC63/SC3) centralized.
This standard was drafted. Guangzhou Chemical Reagent Factory.
1 Scope
This standard specifies the Rose tricarboxylic acid ammonium (aluminum reagent) and chromium azure S colorimetric determination of aluminum in the general method. Rose tricarboxylic acid ammonium (aluminum reagent) Spectrophotometric detection range of 0.4µg/mL ~ 2µg/mL (calculated as Al), visual colorimetric detection range of 0.2µg/mL ~ 2µg/mL (calculated as Al); Chromium Azure S spectrophotometric detection range of 0.01µg/mL ~ 0.2µg/mL (calculated as Al), visual colorimetry the detection range of 0.008µg/mL ~ 0.2µg/mL (calculated as Al).
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 602 Determination of impurities in chemical reagents prepared standard solution (GB/T 602-2002, ISO 6353-1. 1982, NEQ) with GB/T 603 chemical reagent test method Preparations of articles (GB/T 603-2002, ISO 6353-1 with. 1982, NEQ) GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD) GB/T 9721 Chemicals General molecular absorption spectrophotometry
3 PRINCIPLE OF THE METHOD
Rose 3.1 tricarboxylic acid ammonium (aluminum reagent) colorimetry Acetic acid medium at a pH of 4-5, aluminum does generate and Rose-tricarboxylic acid ammonium chelate red sparingly soluble, can be used for aluminum spectrophotometrically or visual colorimetric assay method. Added protective colloid solution allows stable color.
3.2 Chromium Azure S colorimetry
At a pH of about 6 acid medium, aluminum and chrome azure S and cetyl trimethyl ammonium bromide generated blue complex can be used Aluminum spectrophotometry or visual colorimetric assay.
4 Reagents and materials
This standard is used in the standard solution, preparations and products, according to GB/T 602, the provisions of GB/T 603 preparation, test water should be consistent GB/T 6682 specifications in three of water.
5 Instruments
5.1 General laboratory equipment.
5.2 Spectrophotometer. comply with GB/T 9721's.
6 Determination
Rose 6.1 tricarboxylic acid ammonium (aluminum reagent) colorimetry Sampling according to product standards and the preparation of the test solution (if necessary, the test solution was adjusted to neutral). Of 10mL test solution, add 1mL in acetic acid Liquid (mass fraction 30%), 1mL ascorbic acid solution (100g/L), shake, add 10mL of acetic acid - ammonium acetate buffer solution (pH value 4 ~
5), shake, add 3mL Rose tricarboxylic acid ammonium solution (0.5g/L), diluted to 25mL, shake, place 15min. Red and standard solution was Prospective comparative colorimetric solution.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 1 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 602Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 602-2002Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 603Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 603-2002Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
ISO 6353 · ISO 3696
Cited by
- JB/T 11782-2014Diesel engines - Reducing agents for selective catalytic reduction of nitrogen oxides - Technical specifications
- HG/T 4196-2011Chemical reagent - Sodium carbonate decahydrate
- GB 10735-2008Primary chemical - Sodium carbonate anhydrous
- GB 1255-2007Working chemical - Sodium carbonate anhydrous
- GB 694-1981Chemical reagent -- Sodium acetate anhydrous
How to Download GB/T 9734-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 602-2026 — Chemical reagent - Preparation of standard solutions for impurity determination
GB/T 6020-2008 — Butadiene for industrial use -- Determination of tert-butyl-catechol (TBC)
GB/T 6022-2008 — Butadiene for industrial use - Determination of oxygen in gaseous phase above liquid butadiene
Secure payment via Stripe
Payments accepted
GB/T 9734-2008
$45.00