GB/T 8597-2013Rolling bearings - Rust proof packaging (English PDF)
滚动轴承 防锈包装
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 8597-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 18, 2013
Implementation date
June 1, 2014
Scope
GB/T 8597-2013 is the English-translated version of 滚动轴承 防锈包装.
GB/T 8597-2013 is the Chinese standard "Rolling bearings - Rust proof packaging". Its scope clause reads: This standard specifies the rolling bearings, rolling elements, cage and rings and other merchandise bearing parts rust, packaging technical requirements and methods.
This standard applies to manufacturers and users of rolling bearings, rolling elements, cage and rings and other merchandise bearing parts rust, packaging, outsourcing Installation inspection and acceptance.
Found what you need?
Document preview — GB/T 8597-2013
National Standard of the People's Republic of China
- ICS
- 21.100.20
- Classification
- J 11
- Replacing
- GB/T 8597-2003
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 2 Technical Requirements
- 5 transport packaging
- 6 logo
- Appendix A (normative) Test method for rust-proof material
1 Scope
This standard specifies the rolling bearings, rolling elements, cage and rings and other merchandise bearing parts rust, packaging technical requirements and methods.
This standard applies to manufacturers and users of rolling bearings, rolling elements, cage and rings and other merchandise bearing parts rust, packaging, outsourcing
Installation inspection and acceptance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
GB/T 260-1977 Petroleum products - Determination of water
GB/T 261-2008 for Flash Point by Pensky - Martens closed cup method
GB/T 265-1988 Petroleum products - Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 511-2010 petroleum and petroleum products and additives Determination of mechanical impurities
GB/T 2361-1992 anti-rust oil heat test method
GB/T 3536-2008 Petroleum products - Determination of flash and fire points - Cleveland open cup method
GB/T 3716-2000 tray term
GB/T 4122.1-2008 Packaging - Terminology - Part 1. Basic
GB/T 4122.2-2010 Packaging - Terminology - Part 2. Mechanical
GB/T 4122.3-2010 Packaging - Terminology - Part 3. Protection
GB/T 4879-1999 rust-proof packaging
GB/T 6388-1986 transport package shipping mark
JB/T 3016 Rolling crates technical conditions
JB/T 4036 Rolling shipping pallets and crates
JB/T 10560-2006 Rolling rust oil, cleaning agents and cleanliness evaluation method
SH/T 0063-1991 rust oil drying test method
SH/T 0080-1991 antirust oil resistance test method
SH/T 0081-1991 antirust oil salt spray test method
SH/T 0082-1991 antirust oil flow point test method
SH/T 0105-1992 solvent dilution type rust preventive oil film thickness measurement method
SH/T 0106-1992 rust Oilers sweat corrosion test method
SH/T 0107-1992 rust preventive oil Khan detergency test method
SH/T 0195-1992 lubricating oil corrosion test
SH/T 0211-1998 rust grease low temperature adhesion test method
SH/T 0212-1998 antirust oil film removal test method
SH/T 0214-1998 antirust oil separation stability test method
SH/T 0216-1999 rust oil spray test method
Performance test method SH/T 0311-1992 replacement anti-rust oil replacement Khan […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 260-1977Test method for water in petroleum products -- Distillation method
- GB/T 261-2008Determination of flash point - Pensky-Martens closed cup method
- GB/T 265-1988Petroleum products--Determination of kinematic viscosity and calculation of dynamic viscosity
- GB/T 511-2010Petroleum, petroleum products and additives -- Method for determination of mechanical admixtures
- GB/T 2361-1992Rust preventing oils and greases—Test method of wet heat
SH/T 0063-1991 · SH/T 0080-1991 · SH/T 0081-1991 · SH/T 0082-1991 · SH/T 0105-1992 · SH/T 0106-1992 · SH/T 0107-1992 · SH/T 0195-1992
Cited by
- GB/T 25767-2025Rolling bearings - Tapered rollers
- GB/T 4605-2025Rolling bearings - Thrust needle roller and cage assemblies, thrust washers
- GB/T 25763-2024Rolling bearings - Needle roller bearings for automotive transmissions
- GB/T 25770-2024Rolling bearings - Bearings for railway wagon
- FZ/T 93069-2021Rotor type open-end spinning machine. Bearing of rotor
- GB/T 24604-2021Rolling bearings-Angular contact thrust ball bearings and units for machine tool screws
Similar standards
Editions of GB/T 8597
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 8597-2013 | Rolling bearings - Rust proof packaging | current edition | Current |
| GB/T 8597-2003 | Rolling bearings - Rust proof packaging | previous edition | Superseded |
This page sells the current edition, GB/T 8597-2013. Earlier editions are listed for reference only.
How to Download GB/T 8597-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2361-1992 — Rust preventing oils and greases—Test method of wet heat
GB/T 265-1988 — Petroleum products--Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 3536-2008 — Petroleum products -- Determination of flash and fire points -- Cleveland open cup method
Secure payment via Stripe
Payments accepted
GB/T 8597-2013
$135.00