JB/T 5312-2011Rolling bearings - Clutch release bearing units for automobiles (English PDF)
滚动轴承 汽车离合器分离轴承单元
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5312-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 2011
Implementation date
April 1, 2012
Scope
JB/T 5312-2011 is the English-translated version of 滚动轴承 汽车离合器分离轴承单元.
JB/T 5312-2011 is the Chinese standard "Rolling bearings - Clutch release bearing units for automobiles".
Its scope clause reads: This standard specifies the definitions, classification, designation method, structural type, boundary dimensions, technical requirements, testing method, inspection rules, marking and packaging of clutch release bearing unit for automobile.
This standard is applicable to the production, inspection and acceptance of clutch release bearing unit for automobile (hereinafter referred to as the “bearing unit”).
Found what you need?
Document preview — JB/T 5312-2011
National Standard of the People's Republic of China
- ICS
- 21.100.20
- Replacing
- JB/T 5312-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Symbols
- 5 Classification
- 6 Designation Method
- 6.1 Bearing Unit Code Arrangement Sequence
- 6.2 Contact Circular Diameter or Connect Groove Diameter Code
- 6.3 Structural Type Code
- 6.4 Bore Diameter Code
- 6.5 Matched Width Code
- 6.6 Release Sleeve Material Code
- 6.7 Supplementary Code
- 6.8 Code Examples
- 7 Structural Types
- 7.1 Non-aligning Bearing Unit
- 7.2 Self-aligning Bearing Unit
- 8 Boundary Dimensions
- 9 Technical Requirements
- 9.1 Materials and Heat Treatment
- 9.2 Tolerance
- 9.3 Surface Roughness
- 9.4 Contact Angle or Internal Clearance
- 9.5 Residual Magnetism
- 9.6 Lubricating and Sealing
- 9.7 Service Life
- 9.8 Starting Torque
- 9.9 Noise
- 9.10 Aligning Displacement and Aligning Force
- 9.11 Appearance Quality
- 9.12 Others
- 10 Testing Method
- 10.1 Measurement of Tolerance
- 10.2 Measurement of Surface Roughness
- 10.3 Measurement of Contact Angle and Internal Clearance
- 10.4 Measurement of Grease Filling Amount
- 10.5 Measurement of Residual Magnetism
- 10.6 Testing of Hardness
- 10.7 Inspection of Appearance Quality
- 10.8 Sealing Performance Test
- 10.9 Life Test
- 10.10 Measurement of Aligning Displacement and Aligning Force
- 10.11 Measurement of Starting Torque and Noise Test
- 11 Inspection Rules
- 11.1 Delivery Inspection
- 11.2 Acceptance Inspection
- 11.3 Type Inspection
- 12 Marking
- 13 Rustproof Packaging
- 14 Transportation and Storage
- Appendix A (Informative) Boundary Dimensions of Bearing Unit
- Appendix B (Normative) Test Rig Simulate Life Test Method
- Appendix C (Normative) Measurement Method for Aligning Displacement
- Appendix D (Normative) Measurement Method for Aligning Force
- Appendix E (Normative) Measurement Method of Starting Torque
- Appendix F (Normative) Test Method of Noise
1 Scope
This standard specifies the definitions, classification, designation method, structural type, boundary dimensions, technical requirements, testing method, inspection rules, marking and packaging of clutch release bearing unit for automobile.
This standard is applicable to the production, inspection and acceptance of clutch release bearing unit for automobile (hereinafter referred to as the “bearing unit”).
2 Normative References
The following documents are indispensable for the application of this document. For dated references, only the dated edition is applicable to this document. For undated references, the latest edition (including all the amendments) applies.
GB/T 230.1-2009 Metallic Materials-Rockwell Hardness Test-Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
GB/T 307.3-2005 Rolling Bearings-General Technical Regulations
GB/T 2829-2009 Sampling Procedures and Tables for Periodic Inspection by Attributes (Applicable to Inspection of Stability for Productive Process)
GB/T4340.1-2009 Metallic Materials-Vickers Hardness Test-Part 1:Test Method
GB/T 5671-1995 General Purpose Lithium Base Grease for Automobile
GB/T 6882-2008 Acoustics-Determination of Sound Power Levels of Noise Sources Using Pressure-Precision Methods for Anechoic and Hemi-Anechoic Rooms
GB/T 6930-2002 Rolling Bearings-Vocabulary
GB/T 8597-2003 Rolling Bearings-Rust Proof Packaging
GB/T 15089-2001 Classification of Power-driven Vehicles and Trailers
GB/T 18254-2002 High-carbon Chromium Bearing Steel
GB/T24605-2009 Rolling Bearings-Marking for Products
GB/T 24608-2009 Rolling Bearings and Commercial Parts-Inspection Rules
JB/T 1255-2001 Specification for Heat-treatment of Rolling Bearing Parts Made from High Carbon Chromium Steel
JB/T 6641 – 2007 Rolling Bearings-Residual Magnetism and Its Assessment Method
JB/T 7051-2006 Rolling Bearing Parts-Methods for the Measurement and Assessment of Surface Roughness
JB/T 7361-2007 Rolling Bearings-Test Method for Hardness of Parts
JB/T 7752-2005 Rolling Bearings-Sealed Deep Groove Ball Bearings-Specifications
JB/T 8571-2008 Rolling Bearings-Sealed Deep Groove Ball Bearings-Performance Test Rule of Dustproofing, Grease Leakage and Temperature Rise […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 230.1-2009Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 307.3-2005Rolling bearings - General technical regulations
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
- GB/T 4340.1-2009Metallic materials - Vickers hardness test - Part 1: Test method
- GB/T 5671-1995General purpose lithium lubricating grease for automobile
- GB/T 6882-2008Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Precision methods for anechoic rooms and hemi-anechoic rooms
Similar standards
Editions of JB/T 5312
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5312-2011 | Rolling bearings - Clutch release bearing units for automobiles | current edition | Current |
| JB/T 5312-2001 | Rolling bearings - Clutch release bearing units for automobiles | previous edition | Superseded |
This page sells the current edition, JB/T 5312-2011. Earlier editions are listed for reference only.
How to Download JB/T 5312-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 15089-2001 — Classification of power-driven vehicles and trailers
GB/T 18254-2002 — High-carbon chromium bearing steel
GB/T 230.1-2009 — Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
JB/T 5312-2011
$155.00