JB/T 7051-2006Rolling bearing parts - Methods for the measurement and assessment of surface roughness (English PDF)
滚动轴承零件 表面粗糙度测量和评定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7051-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2006
Implementation date
October 1, 2006
Scope
JB/T 7051-2006 is the English-translated version of 滚动轴承零件 表面粗糙度测量和评定方法.
JB/T 7051-2006 is the Chinese standard "Rolling bearing parts - Methods for the measurement and assessment of surface roughness". Its scope clause reads: This standard specifies the measurement and assessment methods for surface roughness of rolling bearing parts.
This standard is applicable to the surface roughness measurement and assessment of metal bearing parts of different dimensions.
Found what you need?
Document preview — JB/T 7051-2006
National Standard of the People's Republic of China
- Replacing
- JB/T 7051-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative References
- 3 Term and Definitions
- 4 Symbols for Quantities
- 5 Assessment Quantities
- 6 Sampling Length lr and Assessment Length ln
- 7 Selection of Measuring Instruments
- 8 Nominal Characteristics of Stylus Instruments
- 9 Gauging Rules and Methods by Profilometers
- 10 Selection of Measuring Position and Assessment of Workpiece Surface Roughness
- 11 Treatment for Surface Defects and Gross Processing Traces
- Appendix A (Informative) Measuring Method for Surface Roughness of Ring Groove by Interferometer
1 Scope
This standard specifies the measurement and assessment methods for surface roughness of rolling bearing parts.
This standard is applicable to the surface roughness measurement and assessment of metal bearing parts of different dimensions.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding amending errors in this text), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 25767-2025Rolling bearings - Tapered rollers
- GB/T 4605-2025Rolling bearings - Thrust needle roller and cage assemblies, thrust washers
- GB/T 25763-2024Rolling bearings - Needle roller bearings for automotive transmissions
- GB/T 24604-2021Rolling bearings-Angular contact thrust ball bearings and units for machine tool screws
- GB/T 304.9-2021Spherical plain bearings—Part 9: General technical regulations
- GB/T 309-2021Rolling bearings - Needle roller
Similar standards
Editions of JB/T 7051
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7051-2006 | Rolling bearing parts - Methods for the measurement and assessment of surface roughness | current edition | Current |
| JB/T 7051-1993 | Rolling bearing parts - Methods for the measurement and assessment of surface roughness | previous edition | Superseded |
This page sells the current edition, JB/T 7051-2006. Earlier editions are listed for reference only.
How to Download JB/T 7051-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 7051-2006
$179.00