Valid

JB/T 10857-2008Rolling bearings - Disc bearings for agricultural machinery (English PDF)

滚动轴承 农机用圆盘轴承

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10857-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

March 12, 2008

Implementation date

September 1, 2008

Scope

JB/T 10857-2008 is the English-translated version of 滚动轴承 农机用圆盘轴承.

JB/T 10857-2008 is the Chinese standard "Rolling bearings - Disc bearings for agricultural machinery". Its scope clause reads: This standard specified the structural types, designation methods, boundary dimensions and technical conditions of disc bearings for agricultural machinery (hereinafter referred to as “bearings”).

This standard is applicable to production, inspection and customer’s type selection and acceptance of disc harrow (plough) bearings for agricultural machinery. Bearings of other types for agricultural machinery may also refer to this standard.

Found what you need?

Document preview — JB/T 10857-2008

National Standard of the People's Republic of China

ICS
21.100.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Terms, Definitions and Symbols
  • 3.1 Terms and Definitions
  • 3.2 Symbols (see Figure 1~Figure 10)
  • 4 Designation Methods
  • 4.1 Basic Code
  • 4.2 Suffix Code
  • 5 Boundary Dimensions
  • 6 Technical Requirements
  • 6.1 Material and Heat Treatment
  • 6.2 Tolerances
  • 6.3 Surface Roughness
  • 6.4 Internal Clearance
  • 6.5 Residual Magnetism
  • 6.6 Lubrication and Sealing
  • 6.7 Others
  • 7 Test Methods
  • 8 Inspection Rules
  • 9 Marking
  • 10 Packaging
  • Appendix A (Informative) Boundary Dimension of Common Bearings
  • Appendix B (Informative) Slurry Test

1 Scope

This standard specified the structural types, designation methods, boundary dimensions and technical conditions of disc bearings for agricultural machinery (hereinafter referred to as “bearings”).

This standard is applicable to production, inspection and customer’s type selection and acceptance of disc harrow (plough) bearings for agricultural machinery. Bearings of other types for agricultural machinery may also refer to this standard.

2 Normative References

The provisions of following documents are recognized as the provisions of this standard after quoting. All dated reference, subsequent amendments (excluding corrections), or revisions are not suitable for this. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents applies. For undated references, the latest edition of the normative document referred to applies.

GB/T 272-1993 Rolling Bearing-Identification Code

GB/T 276-1994 Rolling Bearings-Deep Groove Ball Bearings-Boundary Dimensions

GB/T 307.2-2005 Rolling Bearings-Measuring and Gauging Principles and Methods (ISO 1132-2: 2001, Rolling Bearings-Tolerances-Part 2: Measuring and Gauging Principles and Methods, MOD)

GB/T 708-2006 Dimension Shape Weight and Tolerance for Cold-rolled Steel Plates and Sheets

GB/T 4199-2003 Rolling Bearings-Tolerances-Definitions (ISO 1132-1: 2000, Rolling Bearings-Tolerances-Part 1: Terms and Definitions, MOD)

GB/T 4604-2006 Rolling Bearings-Radial Internal Clearance (ISO 5753: 1991, MOD)

GB/T 6930-2002 Rolling Bearings-Vocabulary (ISO 5593: 1997, IDT)

GB/T 7324-1994 General Purpose Lithium Lubricating Grease

GB/T 7811-2007 Rolling Bearings-Symbols for Quantities (ISO 15241: 2001, IDT)

GB/T 8597-2003 Rolling Bearings-Rust Proof Packaging

GB/T 13237-1991 Cold-rolled Quality Carbon Structural Steel Sheets and Strips

GB/T 18254-2002 High-carbon Chromium Bearing Steel

JB/T 1255-2001 Specification for Heat-treatment of Rolling Bearing Parts Made from High Carbon Chromium Steel

JB/T 2974-2004 Rolling Bearings-Identification Code-Supplemental Regulations

JB/T 3573-2004 Rolling Bearings-Methods for the Measurement of Radial Internal Clearance

JB/T3574-1997 Rolling Bearings-Marking for Products

JB/T 6639-2004 Rolling Bearing Parts-Skeleton Acrylonitrile-buta-diene Copolymers Seal-Specifications

JB/T 6641-2007 Rolling Bearings-Residual Magnetism and Its Assessment Method

JB/T 7048-2002 Rolling Bearing Parts-Plastic Cage-Specifications

JB/T 7051-2006 Rolling Bearing Parts-Methods for the Measurement and Assessment of Surface Roughness

JB/T 8921-1999 Rolling Bearings and Commercial Parts-Inspection Rules […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

How to Download JB/T 10857-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10857-2008

$85.00