JB/T 6635-2007Rolling bearings - Bearings for variable-speed transmissions (English PDF)
滚动轴承 变速传动轴承
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6635-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 2007
Implementation date
September 1, 2007
Scope
JB/T 6635-2007 is the English-translated version of 滚动轴承 变速传动轴承.
JB/T 6635-2007 is the Chinese standard "Rolling bearings - Bearings for variable-speed transmissions".
Its scope clause reads: This standard specifies the structural type, designation methods, boundary dimensions, technical requirements, measurement methods, test methods, inspection rules, marking and packaging and the like of the variable transmission bearings.
This standard is applicable to the production, inspection and customer acceptance of the variable transmission bearings with rated input power no larger than 30kW.
Found what you need?
Document preview — JB/T 6635-2007
National Standard of the People's Republic of China
- ICS
- 21.100.20
- Replacing
- JB/T 6635-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative References
- 3 Symbols and Definitions
- 4 Structural Types
- 5 Designation Methods
- 5.1 Basic Code
- 5.2 Suffix Code
- 5.3 Designation Example
- 6 Main Parameters
- 6.1 Transmission Ratio
- 6.2 Boundary Dimensions
- 7 Technical Requirements
- 8 Measurement Methods
- 8.1 Tolerance
- 8.2 Surface Roughness
- 9 Test Methods
- 9.1 Test instruments and Equipment
- 9.2 No-load Test
- 9.3 Load Test and Determination of Mechanical Efficiency
- 9.4 Temperature Rise Stabilization Test
- 9.5 Noise Determination
- 9.6 Overload Test
- 10 Inspection Rules
- 10.1 Delivery Inspection
- 10.2 Type Inspection
- 11 Marking and Packaging
1 Scope
This standard specifies the structural type, designation methods, boundary dimensions, technical requirements, measurement methods, test methods, inspection rules, marking and packaging and the like of the variable transmission bearings.
This standard is applicable to the production, inspection and customer acceptance of the variable transmission bearings with rated input power no larger than 30kW.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
GB/T 307.1-2005 Rolling Bearings - Radial Bearings - Tolerances (ISO 492: 2002, MOD)
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributea- Part 1: Sampling Schemes Indexed By Acceptance Quality Limit(AQL) for Lot-By-Lot Inspection (ISO 2859-1: 1999, IDT)
GB/T 10069.1-2006 Measurement of Airborne Noise Emitted by Rotating Electrical Machines and the Noise Limits - Part 1: Method for the Measurement of Airborne Noise Emitted By Rotating Electrical Machines (ISO 1680: 1999, MOD)
GB/T 8597-2003 Rolling Bearings-Rust Proof Packaging
JB/T 3574-1997 Rolling Bearings - Marking for Products
JB/T 7051-2006 Rolling Bearing Parts-Methods for the Measurement and Assessment of Surface Roughness […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 307.1-2005Rolling bearings -- Radial bearings -- Geometrical product specifications (GPS) and tolerance values
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 10069.1-2006Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
- GB/T 8597-2003Rolling bearings - Rust proof packaging
- JB/T 3574-1997Rolling bearings - Product marking
- JB/T 7051-2006Rolling bearing parts - Methods for the measurement and assessment of surface roughness
Similar standards
Editions of JB/T 6635
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6635-2007 | Rolling bearings - Bearings for variable-speed transmissions | current edition | Current |
| JB/T 6635-1993 | Rolling bearings - Bearings for variable-speed transmissions | previous edition | Superseded |
This page sells the current edition, JB/T 6635-2007. Earlier editions are listed for reference only.
How to Download JB/T 6635-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 307.1-2005 — Rolling bearings - Radial bearings - Tolerances
JB/T 6635-2007
$85.00