Valid

JB/T 8563-2010Rolling bearings - Water pump bearings (English PDF)

滚动轴承 水泵轴连轴承

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8563-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 8563-2010 is the English-translated version of 滚动轴承 水泵轴连轴承.

JB/T 8563-2010 is the Chinese standard "Rolling bearings - Water pump bearings". Its scope clause reads: This standard specifies the designation method, basic dimensions and specification of water pump bearings (hereinafter referred to as “bearings”).

This standard is applicable to the water pump bearings used for combustion engines in automobiles, tractors and engineering machineries.

Found what you need?

Document preview — JB/T 8563-2010

National Standard of the People's Republic of China

ICS
21.100.20
Replacing
JB/T 8563-1997

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative References
  • 3 Symbols
  • 4 Designation Methods
  • 5 Dimensions
  • 6 Technical Requirements
  • 7 Test Methods
  • 8 Inspection Rules
  • 9 Marking
  • 10 Rustproof Packaging

1 Scope

This standard specifies the designation method, basic dimensions and specification of water pump bearings (hereinafter referred to as “bearings”).

This standard is applicable to the water pump bearings used for combustion engines in automobiles, tractors and engineering machineries.

2 Normative References

The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.

GB/T 272-1993 Rolling Bearing - Identification Code

GB/T 307.2-2005 Rolling Bearings - Measuring and Gauging Principles and Methods (ISO 1132-2:2001, Rolling bearings- Tolerances- Part 2: Measuring and gauging principles and methods, MOD)

GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributea - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit(AQL) for Lot-by-Lot Inspection (ISO 2859-1:1999, IDT)

GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Process Stability)

GB/T 3203-1982 Specification for Carburizing Steels of Bearings

GB 7324-1994 General Purpose Lithium Lubricating Grease

GB/T 8597-2003 Rolling Bearings - Rust Proof Packaging

GB/T 18254-2002 High-carbon Chromium Bearing Steel

GB/T 24605-2009 Rolling Bearings - Marking for Products

JB/T 1255-2001 Specification for Heat-treatment of Rolling Bearing Parts Made from High Carbon Chromium Steel

JB/T 2974-2004 Rolling Bearings - Identification Code - Supplemental Regulations

JB/T 3573-2004 Rolling Bearings - Methods for the Measurement of Radial Internal Clearance

JB/T 5313-2001 Rolling Bearing - Measuring Methods for Vibration (Velocity)

JB/T 5314-2002 Rolling bearing - Measuring Methods for Vibration (Acceleration)

JB/T 6639-2004 Rolling Bearing Parts - Skeleton Acrylonitrile-buta-diene Copolymers Seal - Specifications

JB/T 6641-2007 Rolling Bearings - Residual Magnetism and Its Assessment Method

JB/T 7048-2002 Rolling Bearing Parts - Plastic Cage - Specification

JB/T 7051-2006 Rolling Bearing Parts - Methods for the Measurement and Assessment of Surface Roughness

JB/T 8571-2008 Rolling Bearings - Sealed Deep Groove Ball Bearings - Performance Test Rule of Dustproofing, Grease Leakage and Temperature Rise

JB/T 8881-2001 Specifications for Carburizing Heat Treatment of Rolling Bearing Parts […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

Editions of JB/T 8563

EditionTitleRevisionStatus
JB/T 8563-2010Rolling bearings - Water pump bearingscurrent editionCurrent
JB/T 8563-1997Rolling bearings - Water pump bearingsprevious editionSuperseded

This page sells the current edition, JB/T 8563-2010. Earlier editions are listed for reference only.

How to Download JB/T 8563-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8563-2010

$105.00