Valid

JB/T 13611-2019Spherical plain bearings - Rod end spherical plain bearings for hydraulic cylinders (English PDF)

关节轴承液压缸用杆端关节轴承

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13611-2019 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 2, 2019

Implementation date

April 1, 2020

Scope

JB/T 13611-2019 is the English-translated version of 关节轴承液压缸用杆端关节轴承.

Rod end spherical plain bearings for hydraulic fluid power cylinders are the subject of JB/T 13611-2019, a recommended Chinese machinery industry standard.

It sets the designation method, the structural types, the boundary dimensions, the technical requirements, the inspection methods and the inspection rules, together with signs, rust-proof packaging, transport and storage.

The bearings covered are those fitted to hydraulic cylinders with a maximum rated pressure of 35 MPa, and the standard applies to their production, inspection and user acceptance.

Its quoted standards include GB/T 70.1-2008, GB/T 197-2018, GB/T 304.2-2015, GB/T 1348-2009, GB/T 1591-2018, GB/T 1800.1-2009 and GB/T 2828.1-2012. It is classified J11 in the Chinese system and 21.100.10 internationally. Issued on 2 August 2019, it has applied since 1 April 2020.

Found what you need?

Document preview — JB/T 13611-2019

National Standard of the People's Republic of China

ICS: 21.100.10

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references

1 Foreword

JB/T 13611-2019 was issued by MIIT on 2 August 2019 and has been in force since 1 April 2020.

2 Scope

Rod end spherical plain bearings for hydraulic fluid power cylinders are the subject of JB/T 13611-2019, a recommended Chinese machinery industry standard. It sets the designation method, the structural types, the boundary dimensions, the technical requirements, the inspection methods and the inspection rules, together with signs, rust-proof packaging, transport and storage. The bearings covered are those fitted to hydraulic cylinders with a maximum rated pressure of 35 MPa, and the standard applies to their production, inspection and user acceptance. Its quoted standards include GB/T 70.1-2008, GB/T 197-2018, GB/T 304.2-2015, GB/T 1348-2009, GB/T 1591-2018, GB/T 1800.1-2009 and GB/T 2828.1-2012. It is classified J11 in the Chinese system and 21.100.10 internationally.

3 Normative references

JB/T 13611-2019 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 70.1-2008 — Hot rolled low carbon steel wire rods

GB/T 197-2018 — General purpose metric screw threads -- Tolerances

GB/T 274-2000

GB/T 304.2-2015 — Spherical plain bearings - Identification code

GB/T 304.9-2008

GB/T 307.2-2005 — Rolling bearings -- Measuring and gauging principles and methods

GB/T 699-2015 — Quality carbon structure steels

GB/T 1348-2009

GB/T 1591-2018 — High strength low alloy structural steels

GB/T 1800.1-2009

GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)

GB/T 3944-2002 — Spherical plain bearings -- Vocabulary

GB/T 4199-2003 — Rolling bearings -- Tolerances -- Definitions

GB/T 8597-2013 — Rolling bearings - Rust proof packaging

GB/T 9163-2001 — Spherical plain bearings -- Radial spherical plain bearings

4 About this standard

Issued by: MIIT

English translation: about 20 pages

5 Classification and status

International classification (ICS): 21.100.10

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

JB/T 13610-2019|JB/T 14003-2020|JB/T 14004-2020|JB/T 12264-2015|JB/T 8565-2010|JB/T 8567-2010

How to Download JB/T 13611-2019

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.