JB/T 6637-2014Rolling bearings - Specifications for master bearings (English PDF)
滚动轴承 标准器技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6637-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 6637-2014 is the English-translated version of 滚动轴承 标准器技术条件.
Master bearings, the reference bearings against which production rolling bearings are checked, are the subject of JB/T 6637-2014, a recommended standard of the Chinese machinery industry.
The standard covers the types of master bearing and of master bearing parts and then their structure, their materials and heat treatment, their dimensional tolerances, the tests to be run on them and the inspection rules, along with marking, rust prevention, packaging and storage.
It therefore serves bearing manufacturers and their measuring rooms rather than the end users of bearings. The text works with GB/T 8597, GB/T 18254-2002, JB/T 1255-2014 and the metrological verification regulations JJG 343-2012 and JJG 894-1995.
It replaces JB/T 6637-2004. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 6637-2014
National Standard of the People's Republic of China
- ICS
- 21.100.20
- Replacing
- JB/T 6637-2004
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Symbols
- 4 Structural Type
- 5 Tolerance Grade
- 6 Technical Requirements
- 7 Verification and Acceptance Rules
- 8 Marking
- 8.1 Marking
- 8.2 Packaging
- 9 Rustproof Packaging and Storage
1 Foreword
JB/T 6637-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition JB/T 6637-2004, JB/T 6637-1993.
This standard specifies such technical requirements as structural type, material and heat treatment, dimensional tolerance, verification and acceptance, marking, rustproof, packaging and storage of the standards used for measuring the rolling bearings and their parts (hereinafter referred to as standards).
- Nominal diameter of standards used for measuring tapered roller: ≤120 mm.
2 Scope Preview
Master bearings, the reference bearings against which production rolling bearings are checked, are the subject of JB/T 6637-2014, a recommended standard of the Chinese machinery industry. The standard covers the types of master bearing and of master bearing parts and then their structure, their materials and heat treatment, their dimensional tolerances, the tests to be run on them and the inspection rules, along with marking, rust prevention, packaging and storage. It therefore serves bearing manufacturers and their measuring rooms rather than the end users of bearings. The text works with GB/T 8597, GB/T 18254-2002, JB/T 1255-2014 and the metrological verification regulations JJG 343-2012 and JJG 894-1995. It replaces JB/T 6637-2004.
JB/T 6637-2014 falls under ICS 21.100.20, in the field of mechanical systems and components.
This catalogue holds 260 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 8597
GB/T 18254-2002 — High-carbon chromium bearing steel
JB/T 1255-2014 — Rolling bearings - Parts made of high-carbon chromium bearing steels - Specifications for heat treatment
JJG 343-2012 — Verification Regulation o f Plain Limit Gauges
JJG 894-1995
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 6637-2004 (earlier edition)
JB/T 6637-1993 (earlier edition)
Standards on related subjects:
GB/T 5859-2023 — Rolling bearings—Self-aligning thrust roller bearings—Boundary dimensions
GB/T 4663-2017 — Rolling bearings—Cylindrical thrust roller bearings—Boundary dimensions
JB/T 6639-2015 — Rolling bearing parts - Rubber seals with skeleton - Specifications
JB/T 8874-2026 — Rolling bearings - Split type plummer block housings - Specifications
JB/T 6641-2017 — Rolling bearings - Residual magnetism and its assessment method
6 Classification and status
International classification (ICS): 21.100.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 8597Rolling bearings - Rust proof packaging
- GB/T 18254-2002High-carbon chromium bearing steel
- JB/T 1255-2014Rolling bearings - Parts made of high-carbon chromium bearing steels - Specifications for heat treatment
- JJG 343-2012Verification Regulation o f Plain Limit Gauges
JJG 894-1995
Similar standards
Editions of JB/T 6637
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6637-2014 | Rolling bearings - Specifications for master bearings | current edition | Current |
| JB/T 6637-2004 | Rolling bearings - Specifications for master bearings | previous edition | Superseded |
This page sells the current edition, JB/T 6637-2014. Earlier editions are listed for reference only.
How to Download JB/T 6637-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 6637-2014
$85.00