JB/T 3016-2014Rolling Bearings - Packaging Box - Specifications (English PDF)
滚动轴承 包装箱 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3016-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 3016-2014 is the English-translated version of 滚动轴承 包装箱 技术条件.
JB/T 3016-2014 is the recommended Chinese machinery industry standard for the packaging boxes in which rolling bearings are shipped. It gives the basic technical requirements, the test methods and the inspection rules for double-wall corrugated boxes, for other corrugated boxes and for ordinary wooden boxes.
Its provisions are written for boxes holding rolling bearings with an outside diameter of not more than 180 mm. Box and packaging practice is drawn from a wide set of general documents, among them GB/T 191-2008, GB/T 4122.1-2008, GB/T 4857.3-2008, GB/T 4892-2008 and GB/T 6543-2008.
It replaces the 2004 edition, JB/T 3016-2004. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 3016-2014
National Standard of the People's Republic of China
- ICS
- 21.100.20
- Replacing
- JB/T 3016-2004
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Packaging Box Design
- 5 Basic Box Type
- 5.1 Paper Box and Calp Box
- 5.2 Wooden Box
- 6 Technical Requirements
- 6.1 Materials
- 6.2 Dimension and Tolerance
- 6.3 Box Making
- 6.4 Packing
- 6.5 Marks
- 7 Test Method
- 7.1 Material Test
- 7.2 Measurement of Dimensional Tolerance
- 7.3 Appearance Inspection
- 7.4 Property Test
- 8 Inspection Rules
1 Foreword
JB/T 3016-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition JB/T 3016-2004, JB/T 3016-1991.
This standard specifies the basic box type, technical requirements, test method, inspection rules, etc. of double corrugated box, calp box and common wooden box (hereinafter referred to as paper box, calp box and wooden box respectively) used for external package of rolling bearing.
This standard is applicable to the production, inspection and acceptance of external packages of various bearings and commercial parts with external diameter not larger than 180mm and rust-proof period of half a year or one year for domestic sales.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for the packaging boxes in which rolling bearings are shipped. It gives the basic technical requirements, the test methods and the inspection rules for double-wall corrugated boxes, for other corrugated boxes and for ordinary wooden boxes. Its provisions are written for boxes holding rolling bearings with an outside diameter of not more than 180 mm. Box and packaging practice is drawn from a wide set of general documents, among them GB/T 191-2008, GB/T 4122.1-2008, GB/T 4857.3-2008, GB/T 4892-2008 and GB/T 6543-2008. It replaces the 2004 edition, JB/T 3016-2004.
JB/T 3016-2014 falls under ICS 21.100.20, in the field of mechanical systems and components.
This catalogue holds 260 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 153-2009 — Coniferous sawn timber
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 1931-2009 — Method for determination of the moisture content of wood
GB/T 1935-2009 — Method of testing in compressive strength parallel to grain of wood
GB/T 1936.1-2009 — Method of testing in bending strength of wood
GB/T 1938-2009 — Method of testing in tensile strength parallel to grain of wood
GB/T 4122.1-2008 — Packaging terms - Part 1: Basic
GB/T 4122.2-2010 — Packaging terms - Part 2: Machinery
GB/T 4122.3-2010 — Packaging terms - Part 3: Protection
GB/T 4857.3-2008 — Packaging -- Basic tests for transport packages -- Part 3: Stacking test methods using a static load
GB/T 4857.4-2008 — Packaging -- Basic tests for transport packages -- Part 4: Compression and Stacking tests using a compression tester
GB/T 4857.5-1992 — Packaging-Transport packages-Vertical impact test method by dropping
GB/T 4892-2008 — Dimensions of rigid rectangular packages - Transport packages
GB/T 6388-1986 — Transport package shipping mark
GB/T 6543-2008 — Single and double corrugated boxes for transport packages
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 3016-2004 (earlier edition)
JB/T 3016-1991 (earlier edition)
Standards on related subjects:
GB/T 4663-2017 — Rolling bearings—Cylindrical thrust roller bearings—Boundary dimensions
GB/T 4661-2015 — Rolling bearings—Cylindrical rollers
JB/T 1460-2011 — Rolling bearings - Parts made of high-carbon chromium stainless steel - Technical specifications for heat treatment
JB/T 8874-2026 — Rolling bearings - Split type plummer block housings - Specifications
JB/T 5306-2025 — Spherical plain bearings - Spherical plain bearing rod end with ball stud
JB/T 5305-2025 — Rolling bearings - Thrust ball bearings with aligning seat washers - Geometricalproduct specifications (GPS) and tolerance values
6 Classification and status
International classification (ICS): 21.100.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 153-2009Coniferous sawn timber
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 1931-2009Method for determination of the moisture content of wood
- GB/T 1935-2009Method of testing in compressive strength parallel to grain of wood
- GB/T 1936.1-2009Method of testing in bending strength of wood
- GB/T 1938-2009Method of testing in tensile strength parallel to grain of wood
Similar standards
Editions of JB/T 3016
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3016-2014 | Rolling Bearings - Packaging Box - Specifications | current edition | Current |
| JB/T 3016-2004 | Rolling Bearings - Packaging Box - Specifications | previous edition | Superseded |
This page sells the current edition, JB/T 3016-2014. Earlier editions are listed for reference only.
How to Download JB/T 3016-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 3016-2014
$85.00