GB/T 8888-2014Wrough heavy non-ferrous metal products-packing,marking,transportation, storing and cetificate of quality (English PDF)
重有色金属加工产品的包装、标志、运输、贮存和质量证明书
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 8888-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 5, 2014
Implementation date
May 1, 2015
Scope
GB/T 8888-2014 is the English-translated version of 重有色金属加工产品的包装、标志、运输、贮存和质量证明书.
GB/T 8888-2014 fixes how wrought heavy non-ferrous metal products are packed, marked, transported, stored, certified and accepted.
Its general packaging clauses require the pack to keep the product from loosening, deforming, being damaged and from damp corrosion, keep one grade, size and state per packing unit and bundle mixed ones separately and identifiably, forbid stacking heavy on light, large on small or long on short, call for moisture-proof and rust-proof wrapping such as plastic film or VCI paper with desiccant where needed, and allow steel or polyester strapping, while special packing may be agreed in the contract.
It applies to sheet, strip, foil, tube, rod, wire, powder, balls, cakes, rings and forgings. It replaces GB/T 8888-2003, was issued on 5 December 2014 and has applied since 1 May 2015.
Found what you need?
Document preview — GB/T 8888-2014
National Standard of the People's Republic of China
- ICS
- 77.150
- Classification
- H 62
- Replacing
- GB/T 8888-2003
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Packaging
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replacement GB/T 8888-2003 "heavy non-ferrous metal processing products, packaging, labeling, transport and storage." This standard
GB/T 8888-2003 compared to the main changes are as follows.
--- Standard name was changed to "heavy non-ferrous metal processing products, packaging, labeling, transportation, storage and quality certificate";
--- Standard Scope of processed products increased "grain";
--- Normative references increased by "GB/T 25820 packaging strip, QB/T 1313 neutral wrapping paper," a reference standard, delete In addition to "GB/T 16266 Test of packaging materials in contact corrosion" reference standard;
--- Packaging General added, "and should not do heavy pressure light, no big pressure is small, does not push long short" requirements, increase the use of polyester strap Claim;
--- The boxes, barrels, bags, plywood, brackets, trays and other unified named "containers";
--- In the packaging container requirements, an increase of no foreign body requires modifying the "nail arrangement" requirements;
--- Increasing the primary packaging material and its provisions, remove the contact resistance test when rustproof material provisions;
--- Plate package to increase the "long, wide heavy plate of steel pallet packing" requirement, delete "lined with moisture-proof paper or vapor proof Rust paper, plastic film housing carton packaging, external wood splint care "requirement;
--- Plate of a typical package form adds "wide plywood board packaging schematic, heavy plate steel tray packaging schematic" deleted "Timber The paper clip wooden packaging "; modified form of the legend of a typical package sheet, and redefining the applicable product specifications;
--- Package strip adds "reel with waterproof paper or VCI paper and wrapped in plastic film, plastic woven wound after use tile spacers Leng cardboard wooden splint care "requirement; increased after parcel tape roll" cover the plastic cap "plywood packaging requirements; deleted" strip Wound on the liner with wooden pallets, plywood or wooden packaging "requirement;
--- Typical strip packaging to increase the "narrow wooden packaging schematic, narrow wooden pallet packaging schematic"; revised Code strip Packaging in the form of legend;
--- Straight tube packaging to increase the "plastic film wrapping" requirement; for the waveguide, including water pipe and pipe with special requirements Equipment, increase the "neutral wrapping paper liner" requirement; coil packing increases within the specified reel tube; remove the "plaid wooden luggage Installed "requirement;
--- Stick packaging profiles increased "after single or multiple rod with plastic film packaging with plywood or metal U-shaped groove packaging" "single After or more bars wrapped with plastic woven fabric, wood or metal U-groove plywood packaging "" after single or multiple strapping, plastic Wrapping film "requirement; iron (wood) box packaging to increase the" lining neutral packaging "requirements; deleted" disc stick with latticed wood Box packaging "and" disc with a stick or plastic woven sack cloth wrapping "requirement;
--- Tube bar typical package adds "horizontal coil wound around the entire tray plywood tray-type plastic film Wrapping schematic" modified Rods "Wood clip packaging";
--- Wire packaging increased "after the wire rolls, steel or polyester strap (for electrician copper billet packaging) directly fixed On wooden pallets, wrapped with plastic film after reinforcement, plastic cover caps, knit cap "requirement;
--- Wire typical package form of increased "horizontal winding wire (electrician copper billet) wooden pallets plastic film wrapping schematic Map ";
--- Tubes, rods, profiles and wire packaging packing provisions integrate delete other product packaging "with various profiles lined with moisture-proof material Iron material (wood) box packaging "requirement;
--- On the inspection of products marked increase in the production plant, "address, telephone number" requirement;
--- Modify the provisions of the certificate of quality, "quality certificate application plastic packaging to prevent damage. Packing product quality certificate Must be loaded into the box, non-boxed product quality certificate should be issued with shipper demand side "to" quality certificate boxed product It must be loaded into the box, packing products, packing products quality certificate should be non-issue with the shipper demand-side ";
--- Modify the provisions of the acceptance of the "damage caused due to transport, the carrier shall require units within the time limit prescribed carrier unit Proposed to bear the loss by the operating units. In case of dispute, both supply and demand together with the carrier unit negotiated settlement "to" because of transport The damage caused by the demand side should reject, and promptly notify the supplier negotiated settlement. " This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
1 Scope
This standard specifies the weight of non-ferrous metal processing products, packaging, labeling, transportation, storage, quality certificate and acceptance.
This standard applies to heavy non-ferrous metal sheet, strip, strip, foil, tube, rod, wire, powder, balls, tablets, cakes, rings and forgings and other processed products.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 4456 packaging, polyethylene blown film
GB/T 6544 corrugated board
GB/T 10003 general purpose biaxially oriented polypropylene (BOPP) film
GB/T 13519 polyethylene shrink film
GB/T 14188 General VCI packaging material selection
GB/T 22344 packaging polyester strap
GB/T 25820 packaging strip
BB/T 0049 mineral desiccant packaging
QB/T 1313 neutral wrapping paper
QB/T 3808 composite plastic woven
3 Packaging
3.1 Packaging General
3.1.1 product packaging should be able to ensure that products during transport and storage will not loose, deformation damage and moisture corrosion.
3.1.2 method of packaging a variety of products should be the corresponding product standards regulations. When the corresponding lack of defined standards, according to this standard Registration regulations.
3.1.3 of the same product packaging unit should be the same brand, size and status of the product. Under special circumstances, when a different alloy grades, and specifications When the state of products to be loaded into the same unit, should be separately bundle, package, and are identifiable and should do light weight not pressure, high pressure is not small, not long press Short to ensure that the product not to be confused, no damage.
3.1.4 product per unit weight and dimensions of the carrier shall comply with the relevant departments.
3.1.5 with box packaging, product application moisture, rust-proof material (such as plastic film, VCI paper or composite materials, etc.) package Yan. when necessary, Desiccant should be placed.
3.1.6 When using plywood box or packaging, with the inner layer of the product can not overlap. Box or splint steel or polyester strapping matter.
3.1.7 When using a variety of materials bundled package should be firmly tied.
3.1.8 customers have special packaging requirements, packing method can be negotiated and specified in the contract.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 4456Polyethylene blown film for packaging applications
- GB/T 6544Corrugated fibreboard
- GB/T 10003Biaxially oriented polypropylene (BOPP) film
- GB/T 13519Polyethylene heat-shrinkable film for packaging applications
- GB/T 14188General rules for selection and using of packaging materials with volatile corrosion inhibitor
QB/T 3808
Cited by
- GB/T 32468-2025Copper clad aluminum plates, sheets, strips and foils
- GB/T 46017-2025Copper bar for charging pile connector
- GB/T 8891-2025Copper and copper alloy tubes for heat radiators
- GB/T 11091-2024Copper strip and foil for cables
- GB/T 26311-2024Rod, bar and wire of recycled copper and copper alloy
- GB/T 2054-2023Nickel and nickel alloy plate and sheet
Similar standards
Editions of GB/T 8888
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 8888-2014 | Wrough heavy non-ferrous metal products-packing,marking,transportation, storing and cetificate of quality | current edition | Current |
| GB/T 8888-2003 | Wrough heavy non-ferrous metal products-packing,marking,transportation, storing and cetificate of quality | previous edition | Superseded |
This page sells the current edition, GB/T 8888-2014. Earlier editions are listed for reference only.
How to Download GB/T 8888-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2008 — Biaxially oriented polypropylene(BOPP) film for general use
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 13519-2016 — Polyethylene heat-shrinkable film for packaging applications
Secure payment via Stripe
Payments accepted
GB/T 8888-2014
$235.00