GB/T 2900.20-2016Electrotechnical terminology -- High-voltage switchgear and controlgear (English PDF)
电工术语 高压开关设备和控制设备
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 2900.20-2016 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
February 24, 2016
Implementation date
September 1, 2016
Scope
GB/T 2900.20-2016 is the English-translated version of 电工术语 高压开关设备和控制设备.
GB/T 2900.20-2016 — This section GB/T 2900 specifies the rated voltage 3.6kV and above high-voltage switchgear and control equipment (hereinafter referred to as the switching and control equipment) and assembly parts related to the generic term, switchgear and control equipment, switching means the definition of its components, and the operating characteristic parameters, such as electrical terms.
This section applies to circuit breakers, disconnectors, grounding switch, load switch, bypass switch,, isolation circuit breakers, reclosers, segmentation, contactors, starters, combinations, metal-enclosed switchgear and other switching equipment and control equipment. The term standard high-voltage AC fuses see GB/T 15166.1.
Found what you need?
Document preview — GB/T 2900.20-2016
National Standard of the People's Republic of China
- ICS
- 01.040.29
- Classification
- K 43
- Replacing
- GB/T 2900.20-1994
Issued by: Standardization Administration of China
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Generic term
- 4 Switch assembly and control equipment
- 5 Assembly member
- 6 Switching means
- 7 Switch gear member
- 8 Operation
- 9 Characteristic parameters switchgear and control equipment
- Appendix A (informative) high voltage DC switch terms
- Index
Foreword
This section GB/T 2900 Part 20.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 2900.20-1994 "Electrotechnical Terminology high-voltage switchgear and control equipment." this portion of the GB/T 2900.20-1994 main differences are as follows.
--- Delete the relevant test content and test equipment terminology;
--- According to IEC 60050 (441). 1984 reg rearrange the order;
--- Increase in Appendix A "high voltage DC switch terms";
--- Increasing the term under the relevant clauses, terms numbered starting from 101.
This section uses redrafted law revision using IEC 60050 (441). 1984 "switchgear, control equipment and fuses." this part of IEC 60050 (441). 1984 main differences are as follows.
--- Delete the contents of 441-18 fuses;
--- Increase in Appendix A "high voltage DC switch terms";
--- Increasing the term under the relevant clauses, terms numbered starting from 101.
The chapters in this section, the order of the arrangement with the IEC 60050 (441). 1984 consistent, complementary to the content of these clauses are given the same reference under the heading, and additional terms numbered starting from 101.
This part of the National Electrotechnical Terminology Standardization Technical Committee (SAC/TC232) and focal points.
This section is drafted. Xi'an High Voltage Apparatus Research Institute Co., Ltd.
This section participated in the drafting unit. China Electric Power Research Institute, Beijing Career Distribution Automation Co., Ltd., the high level Group Ltd., Xi'an Electric Switch Electric Co., New Northeast Electric Group Co., high-voltage switch, Xi'an High Voltage Switch limited liability company, Beijing Northern Electric Co., Ltd., Zhejiang time-Electric manufacturing Co., Ltd., Jiangsu Arima Electric Group Co., Ltd.
Cooper (Ningbo) Electric Co., Ltd., days with Yi Electric Co., Ltd., Shanghai days Ling Switch Factory Co., Ltd. Huayi Electric Co., Ltd., Tianshui Changcheng Switchgear Factory Co., Ltd., Jinzhou Electric Appliance Group Co., Ltd., Ningbo Tianan (Group) Co., Ltd., Hangzhou Hanson Electric Co., Ltd. Changzhou Pacific power equipment (Group) Co., Ltd. Le Star Lake opened Electric (Hubei) Co., Ltd.
Schneider Electric (China) Co., Ltd., Shanghai Siyuan High Voltage Switchgear, High Voltage Switchgear Shandong Taikai Shenzhen Jin Bo Power Technology Co., Ltd. Huzhou Tailun electrical equipment, the Western Electric Mitsubishi Electric Switchgear Co., Henan Senyuan Electric Co., Ltd., Guangdong is super-Electric Co., Ltd., Guangdong Fan Electric equipment manufacturing Co., Ltd., Sichuan Electric Group Co., Ltd.
1 Scope
This section GB/T 2900 specifies the rated voltage 3.6kV and above high-voltage switchgear and control equipment (hereinafter referred to as the switching and control equipment) and assembly parts related to the generic term, switchgear and control equipment, switching means the definition of its components, and the operating characteristic parameters, such as electrical terms.
This section applies to circuit breakers, disconnectors, grounding switch, load switch, bypass switch,, isolation circuit breakers, reclosers, segmentation, contactors, starters, combinations, metal-enclosed switchgear and other switching equipment and control equipment.
The term standard high-voltage AC fuses see GB/T 15166.1.
2 Normative references
The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB 3906-2006 3.6kV ~ 40.5kV AC metal-enclosed switchgear and control equipment (IEC 62271-200:2003, MOD) GB/T 15166.1 AC high voltage fuses term GB 17467-2010 high/low voltage prefabricated substations (IEC 62271-202:2006, MOD)
3 Generic term
Switching and control equipment Switch means and its associated control, measurement, protection and regulation of a combination of devices, and these devices and equipment with associated electrical connections, accessories, enclosures and supporting members of the general assembly.
Switchgear
Mainly used for power generation, transmission, distribution and power conversion and switching means associated with its control, measurement, protection and regulation of a combination of devices, including connected by these devices and equipment and internal associated accessories, housing and support member assembly thereof.
Control Equipment
Mainly used to control the switching device electrical equipment and switching devices and associated control, measurement, protection and regulation of the device known as a combination. Including the assembly of these devices and equipment and associated internal connections, accessories, enclosures and supporting member thereof.
Indoor switchgear and control equipment it can not withstand the wind, rain, snow, ice and heavy frost and other effects, suitable for installation of switchgear and control equipment in the building or shelter used.
Outdoor switchgear and control equipment can withstand wind, rain, snow, contamination, condensation, ice and heavy frost and other effects, suitable for installation of switchgear and control equipment used in the open air.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 15166.1High-voltage alternating-current fuses -- Part 1: Terminology
- GB 17467-2010High-voltage/low-voltage prefabricated substation
GB 3906-2006 · IEC 62271
Cited by
- GB/T 25890.1-2026Railway applications - Fixed installations - DC switchgear - Part 1: General
- GB/T 32580.1-2026Railway applications - Fixed installations - High voltage AC switchgear and transformers - Part 1: Circuit-breakers
- GB/T 32580.2-2026Railway applications - Fixed installations - High voltage AC switchgear and transformers - Part 2: Disconnectors, earthing switches and switches
- GB/T 32580.3-2026Railway applications - Fixed installations - High voltage AC switchgear and transformers - Part 3: Current transformers
- GB/T 32580.4-2026Railway applications - Fixed installations - High voltage AC switchgear and transformers - Part 4: Voltage transformers
- GB/T 32580.5-2026Railway applications - Fixed installations - AC high voltage switchgear and instrument transformers - Part 5: 27.5 kV and 2×27.5 kV metal-enclosed switchgear and controlgear
How to Download GB/T 2900.20-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 17467-2010 — High-voltage/low-voltage prefabricated substation
GB/T 15166.1-2019 — High-voltage alternating-current fuses -- Part 1: Terminology
GB/T 2900.1-2008 — Electrotechnical terminology - Fundamental terms
Secure payment via Stripe
Payments accepted
GB/T 2900.20-2016
$645.00