JB/T 1255-2001Technical requirements for heat treatment of rolling bearing parts made of high-carbon chromium bearing steel (English PDF)
高碳铬轴承钢滚动轴承零件 热处理技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 1255-2001 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 23, 2001
Implementation date
October 1, 2001
Scope
JB/T 1255-2001 is the English-translated version of 高碳铬轴承钢滚动轴承零件 热处理技术条件.
JB/T 1255-2001 is the Chinese standard "Technical requirements for heat treatment of rolling bearing parts made of high-carbon chromium bearing steel".
Its scope clause reads: This standard specifies the technical requirements and test methods of the annealed, quenched and tempered rolling bearing ring and rolling element (hereinafter referred to as "bearing parts") made from GCr15, GCr15SiMn, GCr15SiMo and GCr18Mo steels which meet those specified in GB/T 18254-2002.
This standard is applicable to the heat treatment quality test of bearing parts during process and finished parts made from above-mentioned steels and also applicable to the heat treatment quality test of bearing parts made from other high-carbon chromium steels.
The bearing parts with special requirements shall be in accordance with corresponding product drawings. Its clauses include technical requirements; test method.
Found what you need?
Document preview — JB/T 1255-2001
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Technical Requirements for Bearing Parts
- 4 Inspection Methods
1 Foreword
JB/T 1255-2001 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 May 2001 and has been in force since 1 October 2001.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the technical requirements for GCr15, GCr15SiMn, GCr15SiMo and GCr18Mo steel rolling bearing parts after annealing, quenching and tempering and the inspection procedure for steel ball crushing load, cold and hot pickling, magnetic testing, etc. This standard is applicable to heat-treatment quality inspection for above-mentioned steel bearing parts interprocess and finished parts. The bearing parts with special requirements shall be in accordance with the corresponding standards and product drawings.
JB/T 1255-2001 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
JB/T 1255-2014 (later edition)
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 13638-2019Steel ball surface strengthening machines
- GB/T 36222-2018General specification for deep groove bearings of aircraft generators and motor generators
- FZ/T 92013-2017SL series top roller bearings
- FZ/T 92024-2017LZ series bottom roller bearings
- GB/T 307.3-2017Rolling bearings - General technical regulations
- JB/T 10336-2017Rolling bearings and parts - Supplementary specifications
Similar standards
How to Download JB/T 1255-2001
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 1255-2001
$185.00