JB/T 12523-2015Bearing die quenching machines (English PDF)
轴承模压淬火机床
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12523-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12523-2015 is the English-translated version of 轴承模压淬火机床.
JB/T 12523-2015 is a recommended Chinese machinery industry standard for die quenching machine tools used on bearing rings. It gives the terminology and definitions, the press types and their parameters, the technical requirements, the test methods, the inspection rules, and marking, packaging, transport and storage.
It applies to die quenching presses for the inner and outer rings of rolling bearings under 2500 mm in diameter, made of high-carbon chromium bearing steel or carburizing bearing steel; the machine is called the press in the text.
Documents applied with it include GB/T 191, GB/T 1184, GB/T 3766, GB 5226.1-2008, GB/T 10923, GB 17120, JB/T 1255-2001, JB/T 6955 and JB/T 8609.
Found what you need?
Document preview — JB/T 12523-2015
National Standard of the People's Republic of China
- ICS
- 25.120.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Type and parameters of the press
- 4.1 Type of the press
- 4.2 Basic parameters
- 5 Technical requirements
- 5.1 General
- 5.2 Performance of the press
- 5.3 Electrical system
- 5.4 Hydraulic system and pneumatic system
- 5.5 Accuracy of the press
- 5.6 Safety protection
- 5.7 Noise
- 5.8 Lubrication system
- 5.9 Appearance
- 6 Test methods
- 6.1 Running test
- 6.2 Inspection of the basic performance
- 6.3 Accuracy inspection
- 6.4 Safety protection test
- 6.5 Inspection of the appearance of the press
- 7 Inspection rules
- 7.1 Factory inspection
- 7.2 Type inspection
- 8 Marking, packaging, transport and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transport
- 8.4 Storage
- Figure 1 Diagram of the basic type of the press
- Table 1 Basic parameters
- Table 2 Coaxiality tolerance
- Table 3 Items of the factory inspection
What this standard covers
This standard specifies the terminology and definition of press quenching machine tools, press type and parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to the diameter of less than 2500mm high-carbon chromium bearing steel and carburizing bearing steel material series of rolling bearing inner and outer ring molding quenching machine (hereinafter referred to as press).
Document data
International classification (ICS): 25.120.10.
Chinese classification (CCS): J62.
Estimated length of the Chinese original: 11,191 words.
Standards quoted by this document
GB/T 191; GB/T 1184; GB/T 3766; GB 5226.1-2008; GB/T 6576; GB/T 7932; GB/T 10923; GB/T 13306; GB 17120; GB/T 23281; JB/T 1255-2001; JB/T 1829; JB/T 5775; JB/T 6955; JB/T 8356.1; JB/T 8609
3 Terms and definitions
4 Type and parameters of the press
5 Technical requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transport and storage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6576Machine tool -- Lubrication systems
- GB/T 7932Pneumatic fluid power -- General rules and safety requirements for systems and their components
Similar standards
How to Download JB/T 12523-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 17120-1997 — Metalforming machinery--Safety requirements
GB 17120-2012 — Metal forming machinery - Safety requirements
GB 17120-2025 — Metalforming machinery - Safety technical specification
JB/T 12523-2015
$219.00