JB/T 11759-2013Machining allowance and tolerance for cold rolled bearing ring (English PDF)
冷轧轴承环件机械加工余量及公差
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11759-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11759-2013 is the English-translated version of 冷轧轴承环件机械加工余量及公差.
JB/T 11759-2013 is the recommended Chinese machinery industry standard dealing with cold rolled bearing ring blanks and, as its title puts it, with their machining allowances and tolerances.
It specifies the requirements for the blank itself, for its surface quality and for its geometric accuracy. It applies to bearing steel rings of 10 mm to 500 mm outside diameter produced on cold ring rolling machines.
The document is classified J32 in the Chinese system and 77.140.85 in the international one, and the Ministry of Industry and Information Technology issued it. Among the standards it quotes are GB/T 4199, GB/T 7811, GB/T 8541, GB/T 18254, JB/T 1255, JB/T 7361 and JB/T 10338.
Found what you need?
Document preview — JB/T 11759-2013
National Standard of the People's Republic of China
- ICS
- 77.140.85
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11759-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard dealing with cold rolled bearing ring blanks and, as its title puts it, with their machining allowances and tolerances. It specifies the requirements for the blank itself, for its surface quality and for its geometric accuracy. It applies to bearing steel rings of 10 mm to 500 mm outside diameter produced on cold ring rolling machines. The document is classified J32 in the Chinese system and 77.140.85 in the international one, and the Ministry of Industry and Information Technology issued it. Among the standards it quotes are GB/T 4199, GB/T 7811, GB/T 8541, GB/T 18254, JB/T 1255, JB/T 7361 and JB/T 10338.
JB/T 11759-2013 falls under ICS 77.140.85, in the field of metallurgy.
This catalogue holds 222 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 4199
GB/T 7811
GB/T 8541
GB/T 18254
JB/T 1255
JB/T 7361
JB/T 10338
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 6401-2017 — Steels for large roll forgings - Technical requirements
GB/T 12362-2016 — Steel die forgings - Tolerance and machining allowance
GB/T 12361-2016 — Steel die forgings - General specification
JB/T 11020-2025 — Ultrapure steel low-pressure rotor forgings for steam turbines of supercritical and ultra-supercritical units - Technical specification
JB/T 11761-2013 — Gear-shaft blank produced by cross wedge rolling - Technical requirements
JB/T 11760-2013 — Precision cold forging of straight bevel gear - Technical requirements
6 Classification and status
International classification (ICS): 77.140.85
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 4199Rolling bearings -- Tolerances -- Definitions
- GB/T 7811Rolling bearings -- Symbols for physical quantities
- GB/T 8541Terminology of forging and stamping
- GB/T 18254High-carbon chromium bearing steel
- JB/T 1255Rolling bearings - Parts made of high-carbon chromium bearing steels - Specifications for heat treatment
- JB/T 7361Rolling bearing parts hardness test method
Similar standards
How to Download JB/T 11759-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 18254-2000 — Coking viscous oil products-Determination of distillation range
GB/T 18254-2002 — High-carbon chromium bearing steel
GB/T 18254-2016 — High-carbon chromium bearing steel
JB/T 11759-2013
$169.00