HG/T 3696.2-2011Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 2: Preparation of impurity standard solutions (English PDF)
无机化工产品 化学分析用标准溶液、制剂及制品的制备 第2部分:杂质标准溶液的制备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3696.2-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 3696.2-2011 is the English-translated version of 无机化工产品 化学分析用标准溶液、制剂及制品的制备 第2部分:杂质标准溶液的制备.
HG/T 3696.2-2011 is the Chinese standard "Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 2: Preparation of impurity standard solutions".
Its scope clause reads: This part specifies the preparation method of impurity standard solution for chemical analysis of inorganic chemical products.
This part is applicable to the preparation of the standard solution of a certain element, ion or molecule of a precise amount in a certain volume as required for the determination of the impurity content in the inorganic chemical product analysis.
It may also be used for chemical analysis of other chemical products. Its clauses include general provisions; warning; preparation method.
Found what you need?
Document preview — HG/T 3696.2-2011
National Standard of the People's Republic of China
- Replacing
- HG/T 3696.2-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword3
- 1 Scope6
- 2 Normative references6
- 3 General provisions6
- 4 Warning7
- 5 Preparation method7
- Appendix A (Informative) Calibration of sulfur impurity standard solution19
- solutions20
- organic molecules22
1 Scope
This part specifies the preparation method of impurity standard solution for chemical analysis of inorganic chemical products.
This part is applicable to the preparation of the standard solution of a certain element, ion or molecule of a precise amount in a certain volume as required for the determination of the impurity content in the inorganic chemical product analysis. It may also be used for chemical analysis of other chemical products.
2 Normative references
The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this Standard.
GB/T 6682-2008 Water for analytical laboratory use - Specification and test methods
HG/T 3696.1 Inorganic chemicals for industrial use - Preparations of standard and reagent solutions for chemical analysis - Part 1: Preparations of standard volumetric solutions
HG/T 3696.3 Inorganic chemicals for industrial use - Preparations of standard and reagent solutions for chemical analysis - Part 3: Preparation of reagent solutions
3 General provisions
3.1
The water used in this part shall comply with the level III water requirements as specified in GB/T 6682-2008, unless otherwise specified.
3.2
The purity of the reagents used in this part shall be above analytical pure.
The readily oxidized metal shall, before use, be subjected to surface treatment.
3.3
The standard and reagent solutions as required by the Appendixes of this part shall, unless otherwise specified, be prepared in accordance with the provisions of HG/T 3696.1 and HG/T 3696.3.
3.4
When diluting the impurity standard solution, it shall use accurate measuring device (pipette, volumetric flask) to perform integral multiple dilution.
AND the volume of the standard solution measured each time shall be not less than 1.00 mL.
3.5
The standard solution for impurity determination shall, unless otherwise specified, be generally stored at room temperature for 12 months; AND it shall be prepared again when there is turbidity, precipitation, or color change.
3.6
The methods for the preparation of the impurity standard solutions as specified in this part are in alphabetical order.
3.7
The volume of the prepared stock solution in this part is for reference only;
AND the user may adjust appropriately the preparation volume in accordance with the use amount, BUT it shall be at least not less than 100 mL.
4 Warning
Some of the reagents used in the preparation process of this part are toxic or corrosive, AND the operator must be careful! Any splashes on the skin must be flushed with water immediately, AND medical attention shall be sought immediately if it is serious.
5 Preparation method
5.1 Preparation of standard solution of metallic element impurity
Unless otherwise specified, this impurity standard solution (SEE Table 1) shall be stored in a suitable plastic bottle.
Table 1 -- Preparation of standard stock solution of metallic element impurity
Name
Solution concentration
Preparation method
Palladium (Pd)
1 mL solution contains 1 mg of palladium (Pd)
WEIGH 0.833 g of palladium chloride which is dried in advance at
105 °C ~ 110 °C for 1 h; ADD 15 ml of 1 +4 hydrochloric acid solution to dissolve it; TRANSFER all of it into a 500 ml volumetric flask; DILUTE it to the mark; SHAKE to make it uniform.
Barium (Ba)
1 mL solution contains 1 mg of barium (Ba)
1. WEIGH 0.889 g of barium chloride (BaCl2 · 2H2 O); DISSOLVE it in water; TRANSFER all of it into a 500 ml volumetric flask;
DILUTE it to the mark; SHAKE to make it uniform.
2. WEIGH 0.718 g of barium carbonate which was dried at 110 °C to constant mass; ADD 1 + 4 hydrochloric acid solution to dissolve it; TRANSFER all of it into a 500 ml volumetric flask;
DILUTE it to the mark; SHAKE to make it uniform.
Bismuth (Bi)
1 mL solution contains 1 mg of bismuth (Bi)
1. WEIGH 1.616 g of bismuth nitrate [Bi (NO 3 ) 3 · 5H2 O]; ADD 50 ml of 1 +4 hydrochloric acid solution to dissolve it; TRANSFER all of it into a 500 ml volumetric flask; DILUTE it to the mark; SHAKE to make it uniform.
2. WEIGH 0.100 g of metal bismuth; DISSOLVE it in 6 mL of nitric acid; BOIL it to remove nitrogen dioxide gas; TRANSFER all of it into a 100 ml volumetric flask; DILUTE it to the mark; SHAKE to […]
B.1 Determination of hexafluorosilicate (fluorosilicic acid)
WEIGH 3 g of hexafluorosilicate (fluorosilicic acid), accurate to 0.0002 g;
PLACE it into the polyethylene cup; ADD 100 mL of water, 10 mL of saturated potassium chloride solution, and 3 drops of 10 g/L phenolphthalein indicator solution; COOL it to 0 °C; USE the sodium hydroxide standard titration solution
[c (NaOH) ~ 1 mol/L] to titrate it to pink; AND it will be deemed as end point if the color does not fade within 15 s; RECORD the volume of sodium hydroxide standard titration solution (V1 ). And then HEAT it to 80 °C; CONTINUE using the sodium hydroxide standard titration solution [c (NaOH) ~ 1 mol/L] to titrate it until the solution is in stable pink; RECORD the volume of sodium hydroxide standard titration solution (V2 ).
The content of hexafluorosilicate is calculated by the mass fraction w1 of hexafluorosilicate (H2 SiF6 ), the result is expressed in w 1 , AND it is calculated in accordance with the formula (B.1)
Where:
V1 - The value of the volume of sodium hydroxide standard titration solution as consumed to titrate to the first end point, in milliliters (mL);
V2 - The value of the volume of sodium hydroxide standard titration solution as consumed to titrate to the second end point, in milliliters (mL);
c - The accurate value of the concentration of the sodium hydroxide standard titration solution (NaOH), in moles per liter (mol/L);
m - The value of the mass of the sample, in grams (g);
M - The value of the molar mass of hexafluorosilicate (1/4 H2 SiF6 ), in grams per mole (g/mol) (M = 36.02).
B.2 Determination of 30% hydrogen peroxide content
WEIGH 1.8 mL (about 2 g) of 30% hydrogen peroxide; INJECT it into a stoppered conical flask; WEIGH it, accurate to 0.0002 g. TRANSFER it into a
250 mL volumetric flask; DILUTE it to the mark; SHAKE it uniformly; MEASURE
25.00 mL of it; ADD 10 mL of 20% sulfuric acid; USE the potassium […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 1587-2025Potassium carbonate for industrial use
- GB/T 1606-2025Sodium bicarbonate for industrial use
- GB/T 3051-2025General methods for the determination of chloride content in inorganic chemical products — Mercurimetric method and ion chromatography method
- GB/T 1610-2024Chromium trioxide for industrial use
- GB/T 23850-2024Sodium perchlorate for industrial use
- GB/T 26521-2024Nickel carbonate for industrial use
Similar standards
Editions of HG/T 3696.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3696.2-2011 | Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 2: Preparation of impurity standard solutions | current edition | Current |
| HG/T 3696.2-2002 | Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 2: Preparation of impurity standard solutions | previous edition | Superseded |
This page sells the current edition, HG/T 3696.2-2011. Earlier editions are listed for reference only.
How to Download HG/T 3696.2-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 3696.3-2011 — Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 3: Preparation of reagent solutions and products
HG/T 3696.1-2002 — Inorganic chemical products - Preparation of standard volumetric solutions for chemical analysis
HG/T 3696.3-2002 — Inorganic chemical products - Preparation of reagent solutions and products for chemical analysis
HG/T 3696.2-2011
$125.00