HG/T 5811-2020Determination of iron content in iron-containing chemical sludge (English PDF)
含铁化工污泥中铁含量测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 5811-2020 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 9, 2020
Implementation date
April 1, 2021
Scope
HG/T 5811-2020 is the English-translated version of 含铁化工污泥中铁含量测定方法.
Iron content in iron-bearing chemical sludge is measured according to HG/T 5811-2020, a recommended chemical industry standard of China. It carries the general provisions for the determination, the rules for taking the sample, and the methods by which the iron is determined.
Its scope is limited to iron-bearing chemical sludge whose iron content is not less than 5 % on a dry basis, so sludges poorer in iron than that fall outside it.
The standard is classified under the Chinese heading Z04 and under ICS 13.030.01. GB/T 6682-2008, GB/T 33057, HG/T 3696.1, HG/T 3696.2, HG/T 3696.3 and HJ/T 20-1998 are quoted and used with it. Issued on 9 December 2020, it has applied since 1 April 2021.
Found what you need?
Document preview — HG/T 5811-2020
National Standard of the People's Republic of China
- ICS
- 13.030.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 5811-2020 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 December 2020 and has been in force since 1 April 2021.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Iron content in iron-bearing chemical sludge is measured according to HG/T 5811-2020, a recommended chemical industry standard of China. It carries the general provisions for the determination, the rules for taking the sample, and the methods by which the iron is determined. Its scope is limited to iron-bearing chemical sludge whose iron content is not less than 5 % on a dry basis, so sludges poorer in iron than that fall outside it. The standard is classified under the Chinese heading Z04 and under ICS 13.030.01. GB/T 6682-2008, GB/T 33057, HG/T 3696.1, HG/T 3696.2, HG/T 3696.3 and HJ/T 20-1998 are quoted and used with it.
HG/T 5811-2020 falls under ICS 13.030.01, in the field of environment and health protection, safety.
This catalogue holds 95 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 33057
HG/T 3696.1
HG/T 3696.2
HG/T 3696.3
HJ/T 20-1998 — Technical specifications on sampling and sample preparation from industry solid waste
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 17145-2024 — Guidelines for recycling of used mineral oil
HG/T 5871-2021 — Technical specification for green-design product assessment - Polyethylene terephthalate (PET) resin
HJ/T 331-2006 — Specifications for environmental protection product. Catalytic converters for petrol vehicles
HG/T 5814-2020 — Waste chemicals - Determination of zinc content
HG/T 5813-2020 — Waste chemicals - Determination of lead content
HG/T 5812-2020 — Recovery and utilization methods for lithium-containing waste
6 Classification and status
International classification (ICS): 13.030.01
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
- GB/T 33057Methods for sampling and sample preparation of waste chemicals
- HG/T 3696.1Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 1: Preparation of standard volumetric solutions
- HG/T 3696.2Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 2: Preparation of impurity standard solutions
- HG/T 3696.3Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 3: Preparation of reagent solutions and products
- HJ/T 20-1998Technical specifications on sampling and sample preparation from industry solid waste
Similar standards
How to Download HG/T 5811-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 33057-2016 — Sampling method of discarded chemicals
GB/T 33057-2022 — Methods for sampling and sample preparation of waste chemicals
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
HG/T 5811-2020
$135.00