GB/T 14801-2009Test method for skewness and bow in woven and knitted fabrics (English PDF)
机织物与针织物纬斜和弓纬试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 14801-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 19, 2009
Implementation date
February 1, 2010
Scope
GB/T 14801-2009 is the English-translated version of 机织物与针织物纬斜和弓纬试验方法.
GB/T 14801-2009 is the Chinese standard "Test method for skewness and bow in woven and knitted fabrics". Its scope clause reads: This Standard specifies the test method for skewness and bow in woven and knitted fabrics.
This Standard applies to woven and knitted fabrics and their products. Its clauses include terms and definitions; principle; tools; standard atmospheres for conditioning and testing; sampling; test steps; calculation of results; test report.
It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on MARCH 19, 2009 and took effect on FEBRUARY 01, 2010.
Found what you need?
Document preview — GB/T 14801-2009
National Standard of the People's Republic of China
- ICS
- 59.080.30
- Classification
- W 04
- Replacing
- GB/T 14801-1993
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Terms and definitions4
- 4 Principle5
- 5 Tools5
- 6 Standard atmospheres for conditioning and testing5
- 7 Sampling5
- 8 Test steps5
- 9 Calculation of results7
- 10 Test report8
1 Scope
This Standard specifies the test method for skewness and bow in woven and knitted fabrics.
This Standard applies to woven and knitted fabrics and their products.
2 Normative references
The provisions in the following documents become provisions of this Standard through reference in this Standard. For dated references, all subsequent amendments (not including errata content) or revisions do not apply to this standard. However, parties to agreements that are based on this Standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this Standard.
GB/T 6529, Textiles - Standard atmospheres for conditioning and testing (GB/T 6529-2008, ISO 139:2005, MOD)
3 Terms and definitions
For the purposes of this Standard, the following terms and definitions apply.
3.1 Skewness
A skewed state caused by the weft or knitting course deviating from the straight line perpendicular to the warp or wale of the fabric.
3.2 A skewed state of one or more arc(s) formed in the width direction of the fabric caused
by the weft or knitting course deviating from the straight line perpendicular to the warp or wale of the fabric.
4 Principle
4.1 Skewness
Trace the mark of the weft or knitting course on the sample, place a ruler perpendicular to the warp or wale along the intersection point with one side of the cloth edge, measure the maximum vertical distance between the ruler and the weft or knitting course, and express the skewness rate by a percentage of the ratio of the vertical distance to the fabric width.
4.2 Bow
Trace the mark of the weft or knitting course on the sample, place a ruler perpendicular to the warp or wale along its lowest point, measure the vertical distance between the lowest point and the highest point on the weft or knitting course, and express the bow rate by a percentage of the ratio of the vertical distance to the fabric width.
5 Tools
5.1 Steel ruler, length greater than the width of the fabric, minimum scale 1 mm.
5.2 Set square, one of the angles being a right angle, length capable of meeting the measurement needs, minimum scale 1 mm.
5.3 Soft pencils or colored pens suitable for marking.
6 Standard atmospheres for conditioning and testing
The standard atmospheres for conditioning and testing shall be in accordance with the standards specified in GB/T 6529.
7 Sampling
Take pieces of fabric bolts (rolls) or products as the unit of laboratory samples.
8 Test steps
8.1 Conditioning
Sample shall be subjected to conditioning according to the regulations of GB/T 6529.
8.2 Placing samples
Spread the samples flat on a flat, smooth horizontal platform without any tension. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of GB/T 14801
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 14801-2009 | Test method for skewness and bow in woven and knitted fabrics | current edition | Current |
| GB/T 14801-1993 | Test method for skewness and bow in woven and knitted fabrics | previous edition | Superseded |
This page sells the current edition, GB/T 14801-2009. Earlier editions are listed for reference only.
How to Download GB/T 14801-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6529-2008 — Textiles - Standard atmospheres for conditioning and testing
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 14801-2009
$55.00