Valid

JB/T 11167.2-2011AC long-length submarine cables with cross-linked polyethylene insulation and their accessories for rated voltages from 10 kV (Um=12 kV) up to 110 kV (Um=126 kV) - Part 2: Cables (English PDF)

额定电压10kV(Um=12kV)至110kV(Um=126kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第2部分:额定电压10kV(Um=12kV)至110kV(Um=126kV)交联聚乙烯绝缘大长度交流海底电缆

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11167.2-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 18, 2011

Implementation date

August 1, 2011

Scope

JB/T 11167.2-2011 is the English-translated version of 额定电压10kV(Um=12kV)至110kV(Um=126kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第2部分:额定电压10kV(Um=12kV)至110kV(Um=126kV)交联聚乙烯绝缘大长度交流海底电缆.

JB/T 11167.2-2011 is the cable part, Part 2, of the recommended Chinese machinery industry standard for long-length AC submarine cables with cross-linked polyethylene insulation rated from 10 kV (Um = 12 kV) up to 110 kV (Um = 126 kV).

It fixes terms and definitions, service characteristics, product designation, technical requirements, cable identification and marking, the tests and the requirements they have to meet, the inspection rules and the rules for shipping and storage.

The cables covered are long-length XLPE submarine cables and optical fibre composite submarine cables laid and operated on the seabed, and the text allows the same requirements to be used for underwater cables crossing rivers and lakes.

Its quoted list includes GB/T 3953-2009, GB/T 9771.1-2008, GJB 2454-1995 and JB/T 11167.1-2011.

Found what you need?

Document preview — JB/T 11167.2-2011

National Standard of the People's Republic of China

ICS
29.060.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11167.2-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.

It is one of 3 parts of the JB/T 11167 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the cable part, Part 2, of the recommended Chinese machinery industry standard for long-length AC submarine cables with cross-linked polyethylene insulation rated from 10 kV (Um = 12 kV) up to 110 kV (Um = 126 kV). It fixes terms and definitions, service characteristics, product designation, technical requirements, cable identification and marking, the tests and the requirements they have to meet, the inspection rules and the rules for shipping and storage. The cables covered are long-length XLPE submarine cables and optical fibre composite submarine cables laid and operated on the seabed, and the text allows the same requirements to be used for underwater cables crossing rivers and lakes. Its quoted list includes GB/T 3953-2009, GB/T 9771.1-2008, GJB 2454-1995 and JB/T 11167.1-2011.

JB/T 11167.2-2011 falls under ICS 29.060.20, in the field of electrical engineering.

This catalogue holds 619 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 2951.11-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 11: Methods for general application -- Measurement of thickness and overall dimensions -- Tests for determining the mechanical properties

GB/T 2951.12-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 12: Methods for general application -- Thermal ageing methods

GB/T 2951.13-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 13: Methods for general application -- Measurement for determining the density -- Water absorption tests -- Shrinkage test

GB/T 2951.21-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 21: Methods specific to elastomeric compounds -- Ozone resistance, hot set and mineral oil immersion tests

GB/T 2951.31-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 31: Methods specific to PVC compounds -- Pressure test at high temperature -- Test for resistance to cracking

GB/T 3048.4-2007 — Test methods for electrical properties of electric cables and wires - Part 4: Test of DC resistance of conductors

GB/T 3048.8-2007 — Test methods for electrical properties of electric cables and wires - Part 8: AC Voltage test

GB/T 3048.11-2007 — Test methods for electrical properties of electric cables and wires - Part 11: Test for dielectric dissipation factor

GB/T 3048.12-2007 — Test methods for electrical properties of electric cables and wires - Part 12: Partial discharge test

GB/T 3048.13-2007 — Test methods for electrical properties of electric cables and wires - Part 13: Impulse voltage test

GB/T 3048.14-2007 — Test methods for electrical properties of electric cables and wires -- Part 14: DC voltage test

GB/T 3082-2008 — Galvanized or zinc-5% aluminum-mixed mischmetal alloy-coated low carbon steel wire for armouring cables

GB/T 3280-2007 — Cold rolled stainless steel plate, sheet and strip

GB/T 3953-2009 — Round copper wire for electrical purposes

GB/T 3956-2008 — Conductors of insulated cables

GB/T 4909.3-2009 — Test methods for bare wires - Part 3: Tensile test

GB/T 6995.1-2008 — Markings for electric wires and cables - Part 1: General requirements

GB/T 6995.2-2008 — Markings for electric wires and cables - Part 2: Standard colours

GB/T 6995.3-2008 — Markings for electric wires and cables - Part 3: Identifications of cables and wires

GB/T 6995.4-2008 — Markings for electric wires and cables - Part 4: Identifications of insulated conductors of cables and wires for electrical appliances and equipments

GB/T 6995.5-2008 — Markings for electric wires and cables - Part 5: Identifications of insulated cores of power cables

GB/T 9771.1-2008 — Single-mode optical fibres for telecommunication -- Part 1: Characteristics of a dispersion unshifted single-mode optical fibre

GB/T 9771.2-2008 — Single-mode optical fibres for telecommunication - Part 2: Characteristics of a cut-off wavelength shifted single-mode optical fibre

GB/T 9771.3-2008 — Single-mode optical fibres for telecommunication - Part 3: Characteristics of an extended wavelength band dispersion unshifted single-mode optical fibre

GB/T 9771.4-2008 — Single-mode optical fibres for telecommunication - Part 4: Characteristics of a dispersion-shifted single-mode optical fibre

GB/T 9771.5-2008 — Single-mode optical fibres for telecommunication - Part 5: Characteristics of a non-zero dispersion shifted single-mode optical fibre

GB/T 9771.6-2008 — Single-mode optical fibres for telecommunication - Part 6: Characteristics of a fibre with non-zero dispersion for wideband optical transport

GB/T 12357.1-2004 — Multimode optical fibres for telecommunication - Part 1: Sectional specification for category A1 multimode fibres

GB/T 12706.2 -2008 — Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV) - Part 2: Cables for rated voltages from 6kV (Um=7.2kV) up to 30kV (Um=36kV)

GB/T 15065-2009 — Black polyethylene compounds for wire and cable

GB/T 15972.20-2008 — Specifications for optical fibre test methods - Part 20: Measurement methods and test procedures for dimensions - Fiber geometry

GB/T 15972.21-2008 — Specifications for optical fibre test methods -- Part 121: Measurement methods and test procedures for dimensions -- Coating geometry

GB/T 15972.22-2008 — Specifications for optical fibre test methods -- Part 22: Measurement methods and test procedures for dimensions -- Length measurement

GB/T 15972.40-2008 — Specifications for optical fibre test methods - Part 40: Measurement methods and test procedures for transmission and optical characteristics - Attenuation

GB/T 15972.42-2008 — Specifications for optical fibre test methods - Part 42: Measurement methods and test procedures for transmission and optical characteristics - Chromatic dispersion

GB/T 15972.44- 2008 — Specifications for optical fibre test methods - Part 44: Measurement methods and test procedures for transmission and optical characteristics - Cut-off wavelength

GB/T 15972.45-2008 — Specifications for optical fibre test methods - Part 45: Measurement methods and test procedures for transmission and optical characteristics - Mode field diameter

GB/T 18480-2001 — Specification for submarine optical fiber cables

GJB 2454-1995

JB/T 5268.2-1991 — Metallic sheaths for cables - Part 2: Lead sheaths

JB/T 8996-1999 — Guide to the selection of high-voltage cables

JB/T 11167.1-2011 — Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage from 10kV (Um=12kV) up to 110kV(Um=126kV) - Part 1: Test methods and requirements

YD/T 769-2010 — Central tube of outdoor optical fiber cables for telecommunications

4 Where this standard sits

It cites 43 standards, among them GB/T 2951.11-2008, GB/T 2951.12-2008, GB/T 2951.13-2008, listed in full above.

2 other standards in this catalogue cite it, among them JB/T 11167.1-2011, JB/T 11167.3-2011.

It is one part of the JB/T 11167 series, of which this catalogue holds 3 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 11167.1-2011 — Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage from 10kV (Um=12kV) up to 110kV(Um=126kV) - Part 1: Test methods and requirements

JB/T 11167.3-2011 — Part 3: Accessories

Standards on related subjects:

JB/T 10696.9-2011 — Test methods for mechanical, physical and chemical properties of electric cables and wires - Part 9: Termite test

GB/T 12528-2008 — Rail vehicle cables with rated voltages up to and including 3kV

GB 12528.11-2003 — Insulated cables (wires) for railway vehicles of rated voltages up to and including 3 kV Amendment 1: Cross-linked polyolefin insulated cables (wires) for railway vehicles

JB/T 14660-2024 — Rubber-insulated flexible cable for underground tunneling equipmentwith rated voltage from 6 kV to 30 kV

7 Classification and status

International classification (ICS): 29.060.20

Chinese Standard Classification (CCS): K 13

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GJB 2454-1995

Similar standards

How to Download JB/T 11167.2-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11167.2-2011

$469.00