JB/T 5268.2-2011Metal sheaths for cables - Part 2: Lead sheaths (English PDF)
电缆金属套 第2部分:铅套
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5268.2-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 5268.2-2011 is the English-translated version of 电缆金属套 第2部分:铅套.
JB/T 5268.2-2011 is the lead part of the recommended Chinese machinery industry standard on metal sheaths for cables. It gives the models of lead sheath, their technical requirements, the test methods and the inspection rules.
It applies to lead sheaths on paper-insulated power cables of AC rated voltage up to 35 kV and on communication cables whose long-term internal pressure stays below 0.07 MPa, and lead sheaths for control, signal and instrument cables may be handled by reference to it.
Sheaths with other special requirements, or of another structure, fall outside it. The part replaces JB/T 5268.2-1991, is classified K13 and 29.060.20.
Found what you need?
Document preview — JB/T 5268.2-2011
National Standard of the People's Republic of China
- ICS
- 29.060.20
- Replacing
- JB/T 5268.2-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5268.2-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 5268.2-1991.
It is one of 3 parts of the JB/T 5268 series.
2 Scope Preview
This standard is the lead part of the recommended Chinese machinery industry standard on metal sheaths for cables. It gives the models of lead sheath, their technical requirements, the test methods and the inspection rules. It applies to lead sheaths on paper-insulated power cables of AC rated voltage up to 35 kV and on communication cables whose long-term internal pressure stays below 0.07 MPa, and lead sheaths for control, signal and instrument cables may be handled by reference to it. Sheaths with other special requirements, or of another structure, fall outside it. The part replaces JB/T 5268.2-1991, is classified K13 and 29.060.20.
JB/T 5268.2-2011 falls under ICS 29.060.20, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 469-2005 — Lead ingots
GB/T 2952.2-2008 — Protective coverings for electric cables - Part 2: Protective coverings for cables with metallic sheath
GB/T 4103.1
GB/T 4103.2
GB/T 4103.3
GB/T 4103.4
GB/T 4103.5
GB/T 4103.6
GB/T 4103.7
GB/T 4103.8
GB/T 4103.9
GB/T 4103.10
GB/T 4103.11
GB/T 4103.12
GB/T 4103.13
GB/T 4103.14
GB/T 4103.15
GB/T 4103.16
JB/T 5268.1-2011 — Metal sheaths for cables - Part 1: General requirements
4 Where this standard sits
It cites 19 standards, among them GB/T 469-2005, GB/T 2952.2-2008, JB/T 5268.1-2011, listed in full above.
2 other standards in this catalogue cite it, among them JB/T 5268.1-2011, JB/T 5332.1-2011.
It is one part of the JB/T 5268 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 5268.1-1991 — Metallic sheaths for cables - Part 1: General
JB/T 5268.1-2011 — 1: General requirements
Other editions:
JB/T 5268.2-1991 (earlier edition)
Standards on related subjects:
JB/T 4278.10-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 10: Spark tester
GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables
GB/T 5023.3-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 3: Non-sheathed cables for fixed wiring
JB/T 3302-2025 — Load detection electrical/optical cable
JB/T 2171-2016 — Field (agricultural) buried cables of rated voltages 0.6/1 kV
7 Classification and status
International classification (ICS): 29.060.20
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 469-2005Lead ingots
- GB/T 2952.2-2008Protective coverings for electric cables - Part 2: Protective coverings for cables with metallic sheath
- GB/T 4103.1Methods for chemical analysis of lead and lead alloys - Part 1: Determination of tin content
- GB/T 4103.2Methods for chemical analysis of lead and lead alloys - Part 2: Determination of antimony content
- GB/T 4103.3Methods for chemical analysis of lead and lead alloys - Part 3: Determination of copper content
- GB/T 4103.4Methods for chemical analysis of lead and lead alloys - Part 4: Determination of iron content
Cited by
- JB/T 11167.2-2011AC long-length submarine cables with cross-linked polyethylene insulation and their accessories for rated voltages from 10 kV (Um=12 kV) up to 110 kV (Um=126 kV) - Part 2: Cables
- JB/T 5268.1-2011Metal sheaths for cables - Part 1: General requirements
- JB/T 5332.1-2011Electric submersible pump cables of rated voltages up to and including 3.6/6 kV - Part 1: General requirements
Similar standards
Editions of JB/T 5268.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5268.2-2011 | Metal sheaths for cables - Part 2: Lead sheaths | current edition | Current |
| JB/T 5268.2-1991 | Metal sheaths for cables - Part 2: Lead sheaths | previous edition | Superseded |
This page sells the current edition, JB/T 5268.2-2011. Earlier editions are listed for reference only.
How to Download JB/T 5268.2-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2952.2-2008 — Protective coverings for electric cables - Part 2: Protective coverings for cables with metallic sheath
GB/T 4103.1-1983 — Methods for chemical analysis of lead-base alloys--The iodimetric titration method for the determination of tin content
GB/T 4103.1-2000 — Methods for chemical analysis of lead and lead alloys Determination of tin content
JB/T 5268.2-2011
$105.00