JB/T 5268.1-2011Metal sheaths for cables - Part 1: General requirements (English PDF)
电缆金属套 第1部分:总则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5268.1-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 5268.1-2011 is the English-translated version of 电缆金属套 第1部分:总则.
JB/T 5268.1-2011 is the general part of the recommended Chinese machinery industry standard on metal sheaths for cables. It establishes the terminology used for the cable metal sheath, the types of sheath and their codes, and then the test methods and the inspection rules that go with them.
Cable metal sheaths are its field of application. The text replaces JB/T 5268.1-1991. The Chinese classification is K13 and the international classification 29.060.20.
Found what you need?
Document preview — JB/T 5268.1-2011
National Standard of the People's Republic of China
- ICS
- 29.060.20
- Replacing
- JB/T 5268.1-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5268.1-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 5268.1-1991.
It is one of 3 parts of the JB/T 5268 series.
2 Scope Preview
This standard is the general part of the recommended Chinese machinery industry standard on metal sheaths for cables. It establishes the terminology used for the cable metal sheath, the types of sheath and their codes, and then the test methods and the inspection rules that go with them. Cable metal sheaths are its field of application. The text replaces JB/T 5268.1-1991. The Chinese classification is K13 and the international classification 29.060.20.
JB/T 5268.1-2011 falls under ICS 29.060.20, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
JB/T 5268.2-2011 — Metal sheaths for cables - Part 2: Lead sheaths
4 Where this standard sits
It cites 2 standards, among them GB/T 8170-2008, JB/T 5268.2-2011, listed in full above.
3 other standards in this catalogue cite it, among them GB/T 18890.2-2015, GB/T 31489.2-2020, JB/T 5268.2-2011.
It is one part of the JB/T 5268 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 5268.2-1991 — Metallic sheaths for cables - Part 2: Lead sheaths
JB/T 5268.2-2011 — 2: Lead sheaths
Other editions:
JB/T 5268.1-1991 (earlier edition)
Standards on related subjects:
JB/T 4278.10-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 10: Spark tester
GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables
GB/T 5023.3-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 3: Non-sheathed cables for fixed wiring
JB/T 3302-2025 — Load detection electrical/optical cable
JB/T 2171-2016 — Field (agricultural) buried cables of rated voltages 0.6/1 kV
7 Classification and status
International classification (ICS): 29.060.20
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- GB/T 31489.2-2020D.C. extruded cable systems for power transmission at a rated voltage up to and including 500kV—Part 2: D.C. land cables
- GB/T 18890.2-2015Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV (Um=252 kV) —Part 2: Power cables
- JB/T 5268.2-2011Metal sheaths for cables - Part 2: Lead sheaths
Similar standards
Editions of JB/T 5268.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5268.1-2011 | Metal sheaths for cables - Part 1: General requirements | current edition | Current |
| JB/T 5268.1-1991 | Metal sheaths for cables - Part 1: General requirements | previous edition | Superseded |
This page sells the current edition, JB/T 5268.1-2011. Earlier editions are listed for reference only.
How to Download JB/T 5268.1-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
JB/T 5268.2-2011 — Metal sheaths for cables - Part 2: Lead sheaths
JB/T 5268.2-1991 — Metallic sheaths for cables - Part 2: Lead sheaths
JB/T 5268.1-2011
$105.00