Valid

GB/T 32346.1-2015Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements (English PDF)

额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第1部分:试验方法和要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (27 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32346.1-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2015

Implementation date

July 1, 2016

Scope

GB/T 32346.1-2015 is the English-translated version of 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第1部分:试验方法和要求.

GB/T 32346.1-2015 is the Chinese standard "Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements".

Its scope clause reads: This section GB/T 32346 specifies the rated voltage of 220kV (Um = 252kV) XLPE submarine power exchange large length Test methods and requirements for cables and accessories.

Note. in line with the provisions of this Part of this section and press the test methods and requirements for inspection of long length submarine cables and accessories can be covered with respect to the scope of accreditation 3.7 large length defines the length of the shorter submarine cable.

This section applies to installation on the seabed of 220kV single core and three-core XLPE submarine cables and optical fiber composite XLPE Insulated submarine cables; also applies to factory fittings (flexible joints), joint repair, submarine cables and overland cables between the transition and other joints and terminations seabed Cable accessories.

This section does not apply to special applications such as offshore floating platform dynamic cable tests. This dynamic cable by another mechanical Stress, and therefore is not included within the scope of this section.

Found what you need?

Document preview — GB/T 32346.1-2015

National Standard of the People's Republic of China

ICS
29.060.20
Classification
K 13

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 5 cable characteristics and main design parameters of
  • 6 5 routine test
  • 7 sampling test
  • 8 11 submarine cable systems Type tests
  • 9 23 Pre-Qualification Test
  • 10 prequalification extended test
  • Appendix A (normative) semi-conductive shielding and semi-conductive jacket resistivity measurement method

1 Scope

This section GB/T 32346 specifies the rated voltage of 220kV (Um = 252kV) XLPE submarine power exchange large length

Test methods and requirements for cables and accessories.

Note. in line with the provisions of this Part of this section and press the test methods and requirements for inspection of long length submarine cables and accessories can be covered with respect to the scope of accreditation 3.7 large length defines the length of the shorter submarine cable.

This section applies to installation on the seabed of 220kV single core and three-core XLPE submarine cables and optical fiber composite XLPE Insulated submarine cables; also applies to factory fittings (flexible joints), joint repair, submarine cables and overland cables between the transition and other joints and terminations seabed

Cable accessories.

This section does not apply to special applications such as offshore floating platform dynamic cable tests. This dynamic cable by another mechanical

Stress, and therefore is not included within the scope of this section.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2951.11-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 11. General test side

Law --- --- Measurement of thickness and overall dimensions of mechanical tests

GB/T 2951.12-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 12. General test side

Law --- Thermal aging methods

GB/T 2951.21-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 21. elastomeric compounds designed

Test method for ozone resistance test --- --- --- Hot set test - Mineral oil immersion test

GB/T 2951.31-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 31. Polyvinyl chloride mixture

Special test methods --- --- high temperature pressure test for resistance to cracking

GB/T 3048.12 wire and cable electrical performance test methods - Part 12. Partial discharge test

GB/T 3048.13 wire and cable electrical performance test methods - Part 13. impulse voltage test

GB/T 3956 cable conductor

GB/T 16927.1 High-voltage test techniques - Part 1. General definitions and test requirements

GB/T 18890.1-2015 rated voltage of 220kV (Um = 252kV) XLPE insulated power cables and accessories 1

. Test methods and requirements

GB/T 32346.2-2015 rated voltage of 220kV (Um = 252kV) XLPE insulated submarine cables and exchange large length attached

Part 2. Large AC submarine cable length

GB/T 32346.3-2015 rated voltage of 220kV (Um = 252kV) XLPE insulated submarine cables and exchange large length attached

Part 3. Submarine Cable Accessories

JB/T 10181.11-2014 cable ampacity Part 11. carrying capacity equations (100% load factor) and calculation of losses

General provisions […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 32346.1-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
27 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32346.1-2015

$455.00