Valid

GB/T 32346.3-2015Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 3: Accessories for submarine cables (English PDF)

额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第3部分:海底电缆附件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32346.3-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2015

Implementation date

July 1, 2016

Scope

GB/T 32346.3-2015 is the English-translated version of 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第3部分:海底电缆附件.

GB/T 32346.3-2015 is the Chinese standard "Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 3: Accessories for submarine cables".

Its scope clause reads: This section GB/T 32346 specifies the rated voltage of 220kV (Um = 252kV) XLPE submarine power exchange large length The basic structure of the cable attachment, model name, technical requirements, inspection rules, packaging, transportation and storage.

This section applies to the rated voltage of 220kV (Um = 252kV) XLPE insulated large length AC submarine cable connector factory (Flexible joints), joint repair, submarine cables and overland cables between transition joints and outdoor terminal, GIS terminals.

Found what you need?

Document preview — GB/T 32346.3-2015

National Standard of the People's Republic of China

ICS
29.060.20
Classification
K 13

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 5 Annex 4 models and naming
  • 6 Technical requirements
  • 7 Annex 7 logo
  • 8 Tests and requirements
  • 9 Acceptance Rule
  • 10 packaging, transportation and storage
  • Annex C (informative) performance silicone oil
  • Annex D (informative) Accessory Installation Guide
  • References

1 Scope

This section GB/T 32346 specifies the rated voltage of 220kV (Um = 252kV) XLPE submarine power exchange large length

The basic structure of the cable attachment, model name, technical requirements, inspection rules, packaging, transportation and storage.

This section applies to the rated voltage of 220kV (Um = 252kV) XLPE insulated large length AC submarine cable connector factory (Flexible joints), joint repair, submarine cables and overland cables between transition joints and outdoor terminal, GIS terminals.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 311.1-2012 insulation coordination - Part 1. Definitions, principles and rules

GB/T 1527-2006 Copper and copper alloy tube drawing

GB/T 2951.11-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 11. General test side

Law --- --- Measurement of thickness and overall dimensions of mechanical tests

GB/T 2951.21-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 21. elastomeric compounds designed

Test method for ozone resistance test --- --- --- Hot set test - Mineral oil immersion test

GB/T 3048.8 wire and cable electrical performance test methods - Part 8. AC voltage test

GB/T 3048.12 wire and cable electrical performance test methods - Part 12. Partial discharge test

GB/T 3048.13 wire and cable electrical performance test methods - Part 13. impulse voltage test

GB/T 4423-2007 Copper and copper alloy rod drawing

GB/T 7354 partial discharge measurement

GB/T 8287.1-2008 standard voltage greater than 1000V system and outdoor post insulators - Part 1. Ceramic or glass

Insulators Test

GB/T 12464-2002 ordinary wooden box

GB/T 16927.1 High-voltage test techniques - Part 1. General definitions and test requirements

GB/T 21429-2008 outdoor and indoor electrical equipment hollow composite insulators definitions, test methods, acceptance criteria and design recommend

GB/T 22381-2008 rated voltage of 72.5kV and above the gas-insulated metal-enclosed switchgear and fluid filled and extruded insulation

Sufficient fluid connecting power cables and dry cable termination

GB/T 23752-2009 rated voltages greater than 1000V electrical equipment with pressurized and non-pressurized hollow porcelain and glass insulators

By GB/T 26218.1-2010 Insulators filthy conditions selection and sizing - Part 1. Definitions, information

And general principles

GB/T 32346.1-2015 rated voltage of 220kV (Um = 252kV) XLPE insulated submarine cables and exchange large length attached

Member - Part 1. Test methods and requirements […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 32346.3-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32346.3-2015

$265.00