Valid

GB/T 20626.1-2017Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirements (English PDF)

特殊环境条件 高原电工电子产品 第1部分:通用技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 20626.1-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 29, 2017

Implementation date

April 1, 2018

Scope

GB/T 20626.1-2017 is the English-translated version of 特殊环境条件 高原电工电子产品 第1部分:通用技术要求.

GB/T 20626.1-2017 sets the general technical requirements for electrical and electronic products used on high plateaus.

It gives plateau environmental parameters and standard atmospheric conditions, technical requirements, testing, marking, packaging, transport and storage of such products, and applies to high- and low-voltage equipment used at altitudes above 1000 m and up to 5000 m; for low-voltage equipment and low-voltage switchgear and controlgear it refers to altitudes above 2000 m up to 5000 m.

It defines conventional and plateau electrical and electronic products and an altitude classification in eight steps from 1000 m to 5000 m, and gives altitude correction factors for power-frequency and impulse withstand voltages.

An informative annex explains how plateau conditions affect products. It is Part 1 of GB/T 20626, replaces GB/T 20626.1-2006, was issued on 29 September 2017 and has applied since 1 April 2018.

Found what you need?

Document preview — GB/T 20626.1-2017

National Standard of the People's Republic of China

ICS
29.020
Classification
K 04
Replacing
GB/T 20626.1-2006

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 plateau environmental conditions and standard atmospheric conditions parameters
  • 5 technical requirements
  • 6 Test
  • 7 logo
  • 8 packaging, transportation and storage
  • Appendix A (informative) Highland environmental conditions and their impact on electrical and electronic products
  • Reference

Foreword

GB/T 20626 "special environmental conditions plateau electrical and electronic products" is divided into three parts.

--- Part 1. General technical requirements;

--- Part 2. Selection and inspection specifications;

--- Part 3. Lightning, contamination, condensation protection requirements.

This section GB/T 20626 Part 1.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This Part replaces GB/T 20626.1-2006 "Special Environmental Conditions Plateau Electrical and Electronic Products Part 1: General technical requirements Seeking ", and GB/T 20626.1-2006 compared to the main technical changes are as follows.

--- Remove the introduction (see the 2006 edition of the introduction);

--- The definition of "regular electrical and electronic products" has been modified (see 3.1, 2006 version 3.1);

--- The definition of "altitude classification" has been modified (see 3.3,2006 version 3.3)

--- Delete 5.2 (see the 2006 version of Chapter 5);

--- Deleted 0m elevation clearances altitude correction factor (see Table 2);

--- Increasing the formula for altitude correction factor, the frequency withstand voltage and impact withstand voltage of Table 3 altitude correction coefficient values The amendment (see formula (1) and Table 3);

--- Increased 2500m, 3500m, 4500m altitude power frequency withstand voltage and impact withstand voltage altitude correction coefficient value (see table 3);

--- Removed 8.1.2 and 8.1.3 (see the 2006 version of Chapter 8).

1 Scope

GB/T 20626 provisions of this part of the high altitude environmental conditions of electrical and electronic products of the plateau environmental conditions and atmospheric parameters of the atmosphere Pieces, technical requirements, testing, marking, packaging, transportation and storage.

This section applies to altitude above 1000m to 5000m plateau areas using high and low voltage electrical and electronic products.

This section refers to the low-voltage electrical equipment and low-voltage switchgear and control equipment for the altitude of 2000m above to 5000m high The original area.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

Electrotechnical terminology - High voltage test techniques and insulation coordination GB/T 2900.19-1994

GB/T 11804 Environmental conditions for electrical and electronic products terms

Climatic and Environmental Conditions of Elevators at Different Elevations GB/T 14597-2010

GB/T 20626.3 Special environmental conditions Highland Electrical and Electronic Products Part 3: Thunder and lightning, contamination, condensation protection requirements

3 Terms and definitions

GB/T 11804 defined and the following terms and definitions apply to this document.

3.1 Conventional electrical and electronic products

Conditions of use for the 2000m (or 1000m) altitude and below electrical and electronic products.

3.2 Plateau electrical and electronic products

On the basis of conventional electric and electronic products, the plateau conditions are adjusted, improved or designed to meet the requirements of this standard Electrical and electronic products.

3.3 Altitude classification

Electrical and electronic products to adapt to the ability of elevation, divided into 1000m, 2000m, 2500m, 3000m, 3500m, 4000m, 4500m and 5000m a total of eight.

4 Plateau environmental conditions parameters and standard atmospheric conditions

4.1 Plateau environmental conditions parameters

See Table 1 (in line with GB/T 14597-2010). […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

Editions of GB/T 20626.1

EditionTitleRevisionStatus
GB/T 20626.1-2017Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirementscurrent editionCurrent
GB/T 20626.1-2006Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirementsprevious editionSuperseded

This page sells the current edition, GB/T 20626.1-2017. Earlier editions are listed for reference only.

How to Download GB/T 20626.1-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 20626.1-2017

$205.00