Valid

JB/T 11820-2014Specification for internal feedback chopper speed-controlled AC motor systems (English PDF)

内馈斩波交流调速电机系统 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11820-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 6, 2014

Implementation date

October 1, 2014

Scope

JB/T 11820-2014 is the English-translated version of 内馈斩波交流调速电机系统 技术条件.

JB/T 11820-2014 is a recommended standard of the Chinese machinery industry for the alternating current variable speed motor system driven by an internal feedback chopper.

It sets the technical requirements for the system, the test methods, the inspection rules and the requirements on logos, packaging, transportation and storage. The systems it is written for are bounded by the rated capacity of the motor they suit.

Its Chinese classification is K20 and its international classification 29.160.99. Among the standards it quotes are GB 3906-2006, GB/T 11022-2011, GB/T 12668.2-2002, GB/T 14549-1993 and JB/T 7594-2006.

Found what you need?

Document preview — JB/T 11820-2014

National Standard of the People's Republic of China

ICS
29.160.99

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11820-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry for the alternating current variable speed motor system driven by an internal feedback chopper. It sets the technical requirements for the system, the test methods, the inspection rules and the requirements on logos, packaging, transportation and storage. The systems it is written for are bounded by the rated capacity of the motor they suit. Its Chinese classification is K20 and its international classification 29.160.99. Among the standards it quotes are GB 3906-2006, GB/T 11022-2011, GB/T 12668.2-2002, GB/T 14549-1993 and JB/T 7594-2006.

JB/T 11820-2014 falls under ICS 29.160.99, in the field of electrical engineering.

This catalogue holds 619 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191-2008 — Packaging - Pictorial marking for handling of goods

GB/T 3309-1989 — Mechanical test at ambient temperature for high-voltage switchgear

GB 3906-2006

GB/T 11022-2011 — Common specifications for high-voltage switchgear and controlgear standards

GB/T 12668.2-2002 — Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for adjustable speed AC power drive systems

GB/T 12668.4-2006 — Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. not exceeding 35 kV

GB 12669-2012

GB/T 13957-2008 — Technical requirement for the fundamental series of three-phase large asynchronous motor

GB/T 14549-1993 — Quality of electric energy supply--Harmonics inpublic supply network

GB/T 16927.1-2011 — High-voltage test techniques -- Part 1: General definitions and test requirements

GB/T 20626.1-2006 — Specific environmental condition - Electric and electronic products for plateau - Part 1: General technical requirements

GB/T 20635-2006 — Special environment condition - Technical requirements of high-voltage apparatuses for plateau

GB/T 22580-2008 — Specific environmental condition - Technical requirements of electric equipments used for plateau - Low-voltage switchgear and controlgear assemblies

JB/T 7594-2006 — Specification for YR series high-voltage wound-rotor three-phase induction motors (frame size 355 to 630)

JB/T 10314.1-2013 — Specification for high voltage three-phase wound-rotor induction motors - Part 1: YRKS, YRKS-W, YRQF series (frame size 355 to 630)

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 13002-2022 — Rotating electrical machines - Thermal protection

GB/T 12350-2022 — Safety requirements of small power motors

JB/T 12685-2016 — Stator coils for high-voltage electrical machines - Technical requirements

JB/T 14617-2025 — General technical specifications for single-phase asynchronous gear reduction motors for fruit and vegetable juice extraction

JB/T 14447-2025 — Evaluation requirements for green factory in the motor manufacturing industry

JB/T 10922-2025 — Technical requirements for rotating electrical machines for plateau railway locomotives

6 Classification and status

International classification (ICS): 29.160.99

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

How to Download JB/T 11820-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11820-2014

$145.00