Valid

GB/T 46085-2025Specifications of tethered gas balloon (English PDF)

系留式观光气球通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for GB/T 46085-2025 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 29, 2025

Implementation date

December 1, 2025

Scope

GB/T 46085-2025 is the English-translated version of 系留式观光气球通用技术条件.

GB/T 46085-2025 is the Chinese standard "Specifications of tethered gas balloon".

Its scope clause reads: This document specifies the technical requirements for tethered sightseeing balloons (hereinafter referred to as "balloons"), describes the inspection, testing and test methods, and The requirements for random documents, marking, packaging, transportation and storage are determined.

This document applies to the design, production and inspection of tethered sightseeing balloons.

Found what you need?

Document preview — GB/T 46085-2025

National Standard of the People's Republic of China

ICS: 97.200.40
Classification: Y 57

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Technical Requirements
4.1 Basic Requirements
4.2 Airbag system
4.3 Suspension System
4.4 Passenger devices
4.5 Mooring System
4.6 Mooring System
4.7 Electrical and Control Systems
4.8 Surface protection
4.9 Emergency Rescue
4.10 Whole Machine
5 Inspection, testing and test methods
5.1 Basic test requirements
5.2 Basic test methods
5.3 Airbag system
5.4 Suspension system
5.5 Passenger devices
5.6 Mooring System
5.7 Mooring System
5.8 Electrical and Control Systems
5.9 Surface protection
5.10 Emergency Rescue
5.11 Whole Machine
6 Random documents, marking, packaging, transportation and storage
6.1 Random Documents and Markings
6.2 Packaging, transportation and storage
Appendix A (Normative) Tear resistance test method
Appendix B (Normative) Tensile Strength Test Method
Appendix C (Normative) Weathering Test Method

1 Scope

This document specifies the technical requirements for tethered sightseeing balloons (hereinafter referred to as "balloons"), describes the inspection, testing and test methods, and

The requirements for random documents, marking, packaging, transportation and storage are determined.

This document applies to the design, production and inspection of tethered sightseeing balloons.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to

This document.

GB/T 191 Pictorial markings for packaging, storage and transportation

GB/T 755 Ratings and performance of rotating electrical machines

GB/T 1038.1-2022 Test method for gas permeability of plastic films and sheets - Part 1.Differential pressure method

GB/T 3811-2008 Crane Design Specification

GB/T 3923.1-2013 Textile fabrics - Tensile properties - Part 1.Determination of breaking strength and elongation at break (strip specimens)

Law)

GB/T 4208-2017 Degrees of protection provided by enclosures (IP code)

GB/T 5226.1 Electrical safety of machinery - Electrical equipment of machinery - Part 1.General technical requirements

GB 5725 Safety Net

GB/T 7403.1 Lead-acid batteries for traction - Part 1.Technical requirements

GB 8408-2018 Safety Specification for Large Amusement Facilities

GB/T 8834-2016 Determination of relevant physical and mechanical properties of fiber ropes

GB/T 8918 Steel Wire Rope for Important Purposes

GB/T 8923.1 Surface preparation of steel substrates before coating - Visual assessment of surface cleanliness - Part 1.Uncoated steel substrates

Rust level and treatment level of steel surface after surface and complete removal of original coating

GB/T 9286 Paints and varnishes cross-cut test

GB/T 13384 General technical requirements for packaging of electromechanical products

GB/T 13912-2020 Technical requirements and test methods for hot-dip galvanized coatings on metallic coatings of steel products

GB/T 14522 Test method for artificial weathering of plastics, coatings and rubber materials for use in mechanical industrial products - Fluorescent UV lamp

GB/T 16855.1-2018 Safety of machinery - Safety-related components of control systems - Part 1.General principles for design

GB/T 19666 General rules for flame retardant and fire resistant wires, cables or optical cables

GB/T 20306 Terminology of Amusement Facilities

GB/T 20438 (all parts) Functional safety of electrical/electronic/programmable electronic safety-related systems

GB/T 20626.1 Special environmental conditions for plateau electrical and electronic products Part 1.General technical requirements

GB/T 28123 Industrial Helium

GB/T 31467 Test methods for electrical performance of lithium-ion power battery packs and systems for electric vehicles

GB/T 23420 | GB/T 32084 | GB/T 32083 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 8918 · GB/T 20438

Editions of GB/T 46085

Edition	Title	Revision	Status
GB/T 46085-2025	Specifications of tethered gas balloon	current edition	Current

This page sells the current edition, GB/T 46085-2025. Earlier editions are listed for reference only.

How to Download GB/T 46085-2025

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.