JB/T 7161-2011Rock drilling machines and pneumatic tools - General technical requirements for heat treated parts (English PDF)
凿岩机械与气动工具 热处理件通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7161-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 7161-2011 is the English-translated version of 凿岩机械与气动工具 热处理件通用技术条件.
JB/T 7161-2011 is a recommended Chinese machinery industry standard giving general technical requirements for the heat treated parts of rock drilling machines and pneumatic tools.
It sets the technical requirements for such parts together with test methods, inspection rules, marking and certificates.
Heat treated parts of these machines and tools are its field, the heat treatment of non-ferrous metal parts being left out, and where a product drawing or technical document states no special requirement the standard is the one to follow.
It carries Chinese classification J84 and international classification 73.100.10, supersedes JB/T 7161-1993, and quotes GB/T 224-2008, GB/T 699-1999, GB/T 1298-2008, GB/T 3077-1999 and GB/T 6394-2002.
Found what you need?
Document preview — JB/T 7161-2011
National Standard of the People's Republic of China
- ICS
- 73.100.10
- Replacing
- JB/T 7161-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 7161-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 7161-1993.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving general technical requirements for the heat treated parts of rock drilling machines and pneumatic tools. It sets the technical requirements for such parts together with test methods, inspection rules, marking and certificates. Heat treated parts of these machines and tools are its field, the heat treatment of non-ferrous metal parts being left out, and where a product drawing or technical document states no special requirement the standard is the one to follow. It carries Chinese classification J84 and international classification 73.100.10, supersedes JB/T 7161-1993, and quotes GB/T 224-2008, GB/T 699-1999, GB/T 1298-2008, GB/T 3077-1999 and GB/T 6394-2002.
JB/T 7161-2011 falls under ICS 73.100.10, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 224-2008 — Determination of depth of decarburization of steels
GB/T 699-1999 — [Replaced by GB/T 699-2015] Quality carbon structural steels
GB/T 1298-2008 — Carbon tool steels
GB/T 1299-2000 — Alloy tool steels
GB/T 3077-1999 — Alloy structure steels
GB/T 6394-2002 — Metal-methods for estimating the average grain size
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 7161-1993 (earlier edition)
Standards on related subjects:
GB 17957-2021 — Rock drilling machines and pneumatic tools - Safety requirements
JB/T 10247-2016 — Open-pit crawler down-the-hole drills
JB/T 8550-2011 — Open-pit crawler drill rigs
JB/T 7169-2017 — Rail-mounted hydraulic rock drills
JB/T 7163-2014 — Rock Drilling Machines and Pneumatic Tools - General Specifications for Steel Die Forging Parts
JB/T 7162-2014 — Rock drilling machines and pneumatic tools - General specifications for lost-wax steel castings
6 Classification and status
International classification (ICS): 73.100.10
Chinese Standard Classification (CCS): J 84
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 7161
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7161-2011 | Rock drilling machines and pneumatic tools - General technical requirements for heat treated parts | current edition | Current |
| JB/T 7161-1993 | Rock drilling machines and pneumatic tools - General technical requirements for heat treated parts | previous edition | Superseded |
This page sells the current edition, JB/T 7161-2011. Earlier editions are listed for reference only.
How to Download JB/T 7161-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 7161-2011
$195.00