JB/T 5126-2011Pneumatic vane motors for starting (English PDF)
起动用叶片式气动马达
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5126-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 5126-2011 is the English-translated version of 起动用叶片式气动马达.
JB/T 5126-2011 is a recommended Chinese machinery industry standard for pneumatic vane motors used in starting duty.
It fixes the model designation and the basic parameters of these starting vane air motors, then sets out their technical requirements, test methods and inspection rules, closing with the provisions for marking, packaging, transport and storage.
The standard applies to vane air motors used for starting on power diesel, petroleum, mining and other machinery and equipment. It takes the place of JB/T 5126-2000.
The Chinese classification recorded for it is J20 and the international classification 23.100.10.
Found what you need?
Document preview — JB/T 5126-2011
National Standard of the People's Republic of China
- ICS
- 23.100.10
- Replacing
- JB/T 5126-2000
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5126-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 5126-2000.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for pneumatic vane motors used in starting duty. It fixes the model designation and the basic parameters of these starting vane air motors, then sets out their technical requirements, test methods and inspection rules, closing with the provisions for marking, packaging, transport and storage. The standard applies to vane air motors used for starting on power diesel, petroleum, mining and other machinery and equipment. It takes the place of JB/T 5126-2000. The Chinese classification recorded for it is J20 and the international classification 23.100.10.
JB/T 5126-2011 falls under ICS 23.100.10, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2828.1
GB/T 5621
GB/T 5898
GB/T 6247
GB/T 13306
GB 17957
GB 19872
JB/T 1590
JB/T 3576
JB/T 4041
JB/T 5937
JB/T 7161
JB/T 7164
JB/T 7165
JB/T 7302
JB/T 9857
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 5126-2000 (earlier edition)
Standards on related subjects:
GB/T 3766-2015 — Hydraulic fluid power -- General rules and safety requirements for systems and their components
GB/T 3452.2-2007 — Fluid power systems -- O-rings -- Part 2: Quality acceptance criteria
JB/T 8727-2004 — Hydraulic hose assemblies
JB/T 7737-2025 — Piston and vane air motors
JB/T 6948-2025 — Reduced air motor
JB/T 5120-2010 — Full hydraulic steering units - Cycloidal rotary valve open-centre non-reaction type
6 Classification and status
International classification (ICS): 23.100.10
Chinese Standard Classification (CCS): J 20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 5621Test methods of performance for rock drilling machines and pneumatic tools
- GB/T 5898Hand-held non-electric power tools -- Noise measurement code -- Engineering method (grade 2)
- GB/T 6247Rock drilling machines and portable power tools -- Terminology -- Part 1: Rock drilling machines, pneumatic tools and machines
- GB/T 13306Plates
- GB 17957Rock drilling machines and pneumatic tools - Safety requirements
Similar standards
Editions of JB/T 5126
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5126-2011 | Pneumatic vane motors for starting | current edition | Current |
| JB/T 5126-2000 | Pneumatic vane motors for starting | previous edition | Superseded |
This page sells the current edition, JB/T 5126-2011. Earlier editions are listed for reference only.
How to Download JB/T 5126-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 17957-2000 — General safety requirements for pneumatic tools
GB 17957-2005 — Rock drilling machines and pneumatic tools - Safety requirements
GB 17957-2021 — Rock drilling machines and pneumatic tools - Safety requirements
JB/T 5126-2011
$105.00