JB/T 13609-2018Specification for electronic starting switches for single-phase motors (English PDF)
单相电动机起动用电子开关技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13609-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 21, 2018
Implementation date
October 1, 2019
Scope
JB/T 13609-2018 is the English-translated version of 单相电动机起动用电子开关技术条件.
Electronic starting switches for single-phase motors are the subject of JB/T 13609-2018, a recommended mechanical and machinery industry standard of China. It fixes the types and basic parameters of these switches and the environmental conditions taken as a basis, then sets the performance requirements and the safety requirements.
Test methods, inspection rules and the provisions on packaging, transportation and storage follow. Its scope is single-phase motor starting electronic switches with a rated voltage below 250 V AC at a frequency of 50 Hz and a rated power of 5500 W or less.
The standard is classified K20 in China and 29.160.30 internationally, was issued by the Ministry of Industry and Information Technology, and quotes GB/T 4798.1-2005, GB/T 4798.2-2008, GB/T 4942.1-2006, GB/T 5080.4-1985, GB/T 5080.7-1986, GB/T 5171.21-2016, GB/T 12350-2009, GB/T 13126, GB/T 13384, GB/T 14536.1-2008, GB/T 14536.11-2008 and GB/T 19142-2016.
Found what you need?
Document preview — JB/T 13609-2018
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 13609-2018 was issued by MIIT on 21 December 2018 and has been in force since 1 October 2019.
2 Scope
Electronic starting switches for single-phase motors are the subject of JB/T 13609-2018, a recommended mechanical and machinery industry standard of China. It fixes the types and basic parameters of these switches and the environmental conditions taken as a basis, then sets the performance requirements and the safety requirements. Test methods, inspection rules and the provisions on packaging, transportation and storage follow. Its scope is single-phase motor starting electronic switches with a rated voltage below 250 V AC at a frequency of 50 Hz and a rated power of 5500 W or less. The standard is classified K20 in China and 29.160.30 internationally, was issued by the Ministry of Industry and Information Technology, and quotes GB/T 4798.1-2005, GB/T 4798.2-2008, GB/T 4942.1-2006, GB/T 5080.4-1985, GB/T 5080.7-1986, GB/T 5171.21-2016, GB/T 12350-2009, GB/T 13126, GB/T 13384, GB/T 14536.1-2008, GB/T 14536.11-2008 and GB/T 19142-2016.
3 Normative references
JB/T 13609-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 4798.1-2005
GB/T 4798.2-2008
GB/T 4942.1-2006
GB/T 5080.4-1985 — Equipment reliability testing. Procedure for point estimates and confidence intervals from reliability determination tests (Exponential distribution)
GB/T 5080.7-1986 — Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
GB/T 5171.21-2016 — Small power motors—Part 21: General test methods
GB/T 12350-2009
GB/T 13126
GB/T 13384
GB/T 14536.1-2008
GB/T 14536.11-2008 — Automatic electrical controls for household and similar use - Particular requirements for motor-starting relays
GB/T 19142-2016 — Packaging for export commodity—General rule
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 4798.1-2005Classification of environmental conditions -- Classification of groups of environmental parameters and their severities -- Part 1: Storage
- GB/T 4798.2-2008Classification of environmental conditions - Classification of groups of environmental parameters and their severities - Part 2: Transportation and handling
- GB/T 5080.4-1985Equipment reliability testing. Procedure for point estimates and confidence intervals from reliability determination tests (Exponential distribution)
- GB/T 5080.7-1986Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
- GB/T 5171.21-2016Small power motors—Part 21: General test methods
- GB/T 12350-2009Safety requirements of small power motors
GB/T 4942.1-2006
Similar standards
How to Download JB/T 13609-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13126-2009 — General specification for damp heat protective packaging of mechanical and electrical products
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 14536.11-2008 — Automatic electrical controls for household and similar use - Particular requirements for motor-starting relays
Secure payment via Stripe
Payments accepted
JB/T 13609-2018
$195.00