GB/T 14536.1-2022Automatic electrical controls—Part 1: General requirements (English PDF)

Foreword

All technical content in this section is mandatory.

GB 14536 "Household and similar electrical automatic controller" is divided into two parts.

Part 1.General requirements

Part 2.Particular requirements

Special requirements and consists of the following components.

GB 14536.3 thermal motor protection Particular requirements (idt IEC 60730-2-2);

Particular requirements GB 14536.4 tubular fluorescent lamp ballasts for thermal protectors (idt IEC 60730-2-3);

GB 14536.5 sealed and semi-hermetic motor - compressor motor thermal protection Particular requirements (idt IEC 60730-2-4);

GB 14536.6 Particular requirements for automatic electrical burner control systems (idt IEC 60730-2-5);

GB 14536.7 pressure sensitive electrical controls - Particular requirements (idt IEC 60730-2-6);

GB 14536.8 timers and time switches - Particular requirements (idt IEC 60730-2-7);

GB 14536.9 Particular requirements for electrically operated water valves (including mechanical requirements) (idt IEC 60730-2-8);

GB 14536.10 - Particular requirements for temperature sensing controls (idt IEC 60730-2-9);

Particular requirements for starting relays (idt IEC 60730-2-10) GB 14536.11 motors;

GB 14536.12 Particular requirements for energy regulators (idt IEC 60730-2-11);

GB 14536.13 Particular requirements for electrically operated door locks (idt IEC 60730-2-12);

GB 14536.14 - Particular requirements for household washing machine controller;

GB 14536.15 Particular requirements for humidity sensing controls (idt IEC 60730-2-13);

GB 14536.16 Particular requirements for electric actuators (idt IEC 60730-2-14);

GB 14536.17 special requirements of the float or electrode-sensitive automatic electrical water level sensing controller used in the boiler appliance (idt

IEC 60730-2-15);

Particular requirements GB 14536.18 household and similar float type level controller (idt IEC 60730-2-16);

GB 14536.19 Particular requirements for electrically operated gas valves, including mechanical requirements (idt IEC 60730-2-17)

This section is equivalent to using the International Electrotechnical Commission IEC 60730-1.2003 (3.1 Edition) "Household and similar electrical automatic control

Part is 1.General requirements. "

Structure of this part of IEC 60730-1.2003 is identical. In this section, there is a corresponding national standards, national standards incorporated by reference

Quasi; no national standards, IEC standards are incorporated by reference outlined. Part 2 Normative arrangement with sequential file

Different IEC 60730-1.

For ease of use, this section made the following editorial changes.

a) "This standard" be replaced by "this section";

b) use a decimal point instead of a decimal comma ",". ",";

c) increase the national standard foreword.

This Part replaces GB 14536.1-1998 "Household and similar electrical controls - Part 1.General requirements"

(Idt IEC 730-1.1993).

This section compared with GB 14536.1-1998 main changes are as follows.

a) an increase of Annex K, Appendix L, Appendix M, Appendix N, Appendix P, Appendix Q, Appendix R, Appendix S;

b) In Chapter 17, the Chinese used instead of the overload test pressure test;

c) In Chapter 23, Chapter 26, Appendix H changed greatly;

d) "in some countries" to name specific countries.

This section of the Appendix A, Appendix B, Appendix C, Appendix E, Appendix G, Appendix H, Appendix J, Appendix L, Appendix N, Appendix P, Q is the Appendix

Normative Appendix; Appendix D, Appendix F, Appendix K, Appendix M, Appendix R, S appendix is informative appendix.

This part is proposed by the China Electrical Equipment Industrial Association.

This part of the jurisdiction of the National Standardization Technical Committee household automatic controller.

This section is drafted. Guangzhou Electric Apparatus Research Institute, Foshan Tongbao Co., Ltd., Jiangsu Baoying electrical plant, Strix (Guangzhou)

Electric Co., Ltd., Shunde District of Foshan City Electric Industrial Co., Ltd. Miharu, Changzhou, Jiangsu Xi Mate Electric Co., Ltd., Foshan City Days peer Thermostat

Co., Ltd, Guangdong Midea Refrigeration Equipment Co., Ltd. Zhejiang Yan thermostat, Guangdong Kelon Electrical Co., Ltd., Guangzhou

Household electrical detection by the China Quality Certification Center, Emerson Electric (Shenzhen) Co., Ltd., Zhejiang spent three Refrigeration Group.

Drafters of this section. Huang Kaiyun, wheat harvest, Yang storms and left Cheung expensive, Shao Zhicheng, Du Li, Feng Hui Cai, Baodian Sheng, Chen Yonglong, HUANG Xiao-feng,

Core hole Xun, Zhang Weidong, Lin Jianlian, Chen Yuzhong, Li Hui.

This section commissioned the National Standardization Technical Committee household automatic controller responsible for the interpretation.

The partial substitution of previous standards published case.

--- GB 14536.1-1993;

--- GB 14536.1-1998.

IEC Foreword

1) The International Electrotechnical Commission (IEC) is a worldwide standardization group composed of all national electrotechnical committees (IEC National Committees)

Organizations. The object of IEC is to promote international cooperation in the countries electricians and standardized electronic field all questions. For this purpose

IEC addition to other activities, but also publishes International Standards, technical specifications, technical reports and guidelines (hereinafter referred to as

"IEC Publication"). Formulation of these publications is entrusted to technical committees to complete. Any IEC National Committee

Yes, if interested in this technology, and can participate in its development work. Liaising with the IEC international, governmental and non-governmental

Government organizations may also participate in this work. Conditions IEC and the International Organization for Standardization (ISO) in accordance with the provisions of the agreement, close

Cut cooperation.

2) IEC IEC National Committees on technical issues formal decisions or agreements of particular concern on this issue with all the skills to participate

Technique developed by the Commission and, where possible expressed consensus on the issues involved in the international arena.

3) IEC Publications have the form of recommendations for international use, and in this sense the countries recognized by the Commission, should make every effort to

IEC standard technologies to ensure content is correct, IEC for any incorrect translation in use end-user live

responsibility.

4) In order to promote international unification, IEC National Committees should clearly maximize the IEC international standards into the country

Standard or region. In case of any difference between the standard and the corresponding national or regional standard IEC, should be national standards or

Regional standards clearly stated.

5) IEC not developed any sign of approval procedures. When a device is declared if it complies with one of its standards of IEC, IEC this

Assumes no responsibility.

6) All users should ensure that they have the latest version of this publication.

7) IEC or its managers, employees, agents or employees including experts, members of the Technical Committee and the National Commission on the use of IEC

Any personal injury caused by the IEC publication, property damage or any loss directly or indirectly caused by natural disasters and fees

Use (including legal fees) and expenses exceed IEC publication irresponsible.

8) Note that the standard references mentioned in this publication. Publication reference standard for the correct application of this standard is indispensable.

9) Some standards of international publications will involve patents, IEC these patent rights will not be responsible.

International Standard IEC 60730-1 the IEC /T C72.home automation controller Technical Committee.

In this enhanced version of the third edition of IEC 60730-1 (1999) [documents 72/416/FDIS and 72/417/RVD] and Rev. 1 (2003) [text

Member 72/577/FDIS and 72/580/RVD] basis.

The version number is 3.1.

Vertical line indicates that the boundary has been revised Fundamentals member 1 changes.

In the development of a complete household and similar use automatic controller international standards process, we must consider the actual various regions of the world

The formation of the different requirements of the situation, and should recognize differences in various countries electrical systems and wiring rules.

Appendix A, Appendix B, Appendix C, Appendix E, Appendix G, Appendix H, Appendix J, Appendix L, Appendix N, P and Appendices Appendix Q oriented part

Component.

Appendix D, Appendix F, Appendix K, Appendix M, R and Appendices Appendix S is only available.

Keyword alphabetical index only data.

Differences in different countries in order to "Note. In some countries," given in the form of these differences, see the following articles.

2.1.5 11.11.1.2 17.10

2.7.2 11.11.1.3 17.10.4

2.7.3 11.11.1.4 17.12.5

2.14.2 12.1.6 17.14

4.2.1 12.3 18.1.6

1 Scope and normative references

1.1 In general, this section applies to household and similar devices or electrical controls used in conjunction with these devices, including

Including heating, air conditioning and similar controller. These devices can use electricity, gas, oil, solid fuel, solar energy, etc., or a combination thereof

energy.

1.1.1 This section applies to the inherent safety Automatic electrical controls for safety equipment and related operating values, operating time and operating procedures

Order, as well as for electric control devices in the home or the like, or with the device for use with the test.

This section also applies within the scope of GB 4706.1 electrical controller.

Note. "device" in this section use the term with "utensils and equipment."

This section does not apply to electric automatic controller designed for industrial use. Unless the special requirements in Part 2 of the relevant standards significantly involved

And to.

This section also applies to the control system as a separate part of the controller or the multi-function controller with no mechanical power output of the group

Together controller.

Not as a general household, but used in public places, such as to shops, in light industry and farm equipment from non-professional use, the power-on self

Motion controller are also included within the scope of this.

See Appendix J.

1.1.2 This section applies to mechanically operated or electrically-operated electric automatic controllers that can respond to or control various characteristics, such as temperature

, Pressure, over time, humidity, light, electrostatic effects, flow, level, current, voltage, acceleration, or a combination thereof.

1.1.3 This section applies to a predetermined starting relay for switching motor starting winding, which is a special kind of electrical controls. This

Kind can be mounted in the motor controller, the motor may be separated.

1.1.4 This section also applies to manual control in/or electrically and mechanically with the automatic controller combination.

Note. Requires an integral part of the manual switch does not constitute an automatic controller included in the GB 15092.1.

1.2 section applies to rated voltage not exceeding 690V, rated current not exceeding 63A controller.

1.3 section does not depend on the controller in response to a predetermined value in the automatic operation of the device mounting method of. If these values using the protection

Or the surrounding environment play a role, from the corresponding equipment standards specified by the manufacturer or response defined in this section apply.

1.4 section also applies to controllers equipped with electronic devices. The kinds of requirements of the controller is given in Appendix H.

This section applies to NTC (negative temperature coefficient) or PTC (positive temperature coefficient) thermistor Automatic electrical controls. Their additional

Requirements included in Appendix J.

2 Definitions

This section uses the following definitions. The definition used "voltage" and "current" Unless otherwise specified, refer to RMS (r.m.s).