JB/T 11106-2011Leg-supported hydraulic rock drills (English PDF)
支腿式液压凿岩机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11106-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 11106-2011 is the English-translated version of 支腿式液压凿岩机.
JB/T 11106-2011 is a recommended Chinese machinery industry standard for hydraulic rock drills of the leg-supported type. It gives the types and the basic parameters, the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
The standard is meant to be used across the life of the machine: its design, its manufacture, its testing and its service. It quotes GB/T 2828.1, GB/T 3452.1, GB/T 5621, GB/T 5898, GB/T 7935-2005, GB 17957-2005 and JB/T 7161 among its references.
The drill carries the Chinese classification J84 and the international classification 73.100.10.
Found what you need?
Document preview — JB/T 11106-2011
National Standard of the People's Republic of China
- ICS
- 73.100.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11106-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for hydraulic rock drills of the leg-supported type. It gives the types and the basic parameters, the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. The standard is meant to be used across the life of the machine: its design, its manufacture, its testing and its service. It quotes GB/T 2828.1, GB/T 3452.1, GB/T 5621, GB/T 5898, GB/T 7935-2005, GB 17957-2005 and JB/T 7161 among its references. The drill carries the Chinese classification J84 and the international classification 73.100.10.
JB/T 11106-2011 falls under ICS 73.100.10, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2828.1
GB/T 3452.1
GB/T 5621
GB/T 5898
GB/T 7935-2005 — Hydraulic fluid power - General requirements for hydraulic components
GB 17957-2005 — Rock drilling machines and pneumatic tools - Safety requirements
JB/T 1590
JB/T 3576
JB/T 4041
JB/T 7161
JB/T 7162
JB/T 7163
JB/T 7164
JB/T 7302
JB/T 9857
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB 17957-2021 — Rock drilling machines and pneumatic tools - Safety requirements
JB/T 10247-2016 — Open-pit crawler down-the-hole drills
JB/T 8550-2011 — Open-pit crawler drill rigs
JB/T 14437-2023 — Carbon dioxide cracking tubes
JB/T 13278-2017 — Tyred hydraulic tunnelling drill jumbos
JB/T 11105-2011 — Hydraulic rock splitters
6 Classification and status
International classification (ICS): 73.100.10
Chinese Standard Classification (CCS): J 84
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3452.1Fluid power systems -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and size identification code
- GB/T 5621Test methods of performance for rock drilling machines and pneumatic tools
- GB/T 5898Hand-held non-electric power tools -- Noise measurement code -- Engineering method (grade 2)
- GB/T 7935-2005Hydraulic fluid power - General requirements for hydraulic components
- GB 17957-2005Rock drilling machines and pneumatic tools - Safety requirements
Similar standards
How to Download JB/T 11106-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 17957-2005 — Rock drilling machines and pneumatic tools - Safety requirements
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
JB/T 11106-2011
$135.00